Plot Axes/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "{{Caption|Zastosuj do wszystkich selektorów osi}}")
(Created page with "Następnie możesz przeskalować cały wykres, aby zmieścić go w widocznym obszarze, używając czterech suwaków.")
Line 33: Line 33:
{{Caption|Zastosuj do wszystkich selektorów osi}}
{{Caption|Zastosuj do wszystkich selektorów osi}}


Następnie możesz przeskalować cały wykres, aby zmieścić go w widocznym obszarze, używając czterech suwaków.
After that you can scale the whole plot to fit it in the visible area, using the four sliders


[[File:Plot Axes Sliders.png|Plot area controlling sliders]]
[[File:Plot Axes Sliders.png|Plot area controlling sliders]]

Revision as of 18:30, 31 August 2021

Plot: Osie

Lokalizacja w menu
Plot → Konfiguruj osie
Środowisko pracy
Wykres
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
brak

Opis

Standardowy moduł wykresów dostarcza już elementarne narzędzie do kontroli osi wykresów . Jednak narzędzie to jest niewystarczające, gdy trzeba obsługiwać wieloosiowe wykresy, jak to ma miejsce w Poradnik: Wykres wieloosiowy. Aby przezwyciężyć to ograniczenie, możesz zainstalować środowisko pracy Wykres używając Menadżera dodatków, dzięki czemu będzie dostępne bardziej kompletne narzędzie do edycji osi wykresu.

Użycie

Wybierz kartę wykresu, którą chcesz edytować, i uruchom to narzędzie.

Zalecane jest rozpoczęcie skalowania całej powierzchni, aby mieć pewność, że zmieści się ona w dostępnej przestrzeni. W tym celu należy włączyć opcję Zastosuj do wszystkich osi.

Apply to all axes

Zastosuj do wszystkich selektorów osi

Następnie możesz przeskalować cały wykres, aby zmieścić go w widocznym obszarze, używając czterech suwaków.

Plot area controlling sliders

Sliders to scale the plot

When you are happy with the general size of the plot, you can deselect Apply to all axes, and fine tune each set of axes independently. Just select the set of axes you want to edit at the top

Plot axes selector

Selector for the set of axes to de edited

You can again use the sliders to control the area covered by that subplot. You can also control where the ticks and titles are placed for both X axis and Y axis

Plot axes position editor

Editor of positions for the selected axes

More specifically, you can set whether X axis is shown below or above the plot, as well as whether Y axis is shown at the left or at the right of the plot. You can even set the offset of both axis with respect to the plot baseline.

Finally you can set the minimum and maximum values considered for each set of axes, the so-called zoom

Plot zoom editor

Editor of minimum and maximum considered values