Złożenie 3: Pomiar kąta

From FreeCAD Documentation
Revision as of 17:24, 20 December 2021 by Kaktus (talk | contribs) (Created page with "Złożenie 3: Pomiar kąta")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.

Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.

Zobacz stronę wytycznych Wikidla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.

Other languages:

Assembly3 MeasureAngle

Menu location
None
Workbenches
Assembly3
Default shortcut
None
Introduced in version
-
See also
None

Description

This tool measures the angle between two objects of an assembly using straight edges or planar faces.

Usage

  1. Select two straight edges or planar faces (or one of each).
  2. Press the Measure angle button.