Złożenie 3: Wiązanie długość linii

From FreeCAD Documentation
Revision as of 19:39, 14 December 2021 by Kaktus (talk | contribs) (Created page with "Złożenie 3: Wiązanie długość linii")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.

Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.

Zobacz stronę wytycznych Wikidla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.

Other languages:

Assembly3 ConstraintLineLength

Menu location
None
Workbenches
Assembly3
Default shortcut
None
Introduced in version
-
See also
None

Description

This tool constrains the length of a 2D line like a non-subdivided wire made with the Draft workbench in relation with a work plane.

The length is set to a certain value by editing the length parameter in the properties panel.

Usage

  1. Select a 2D line
  2. Press the Line length button.
  3. Set the Length value in the properties panel.
  4. Press the Solve constraints or the Quick solve button to recompute.