Верстак FEM
Introduction
Верстак МКЭ предоставляет современный набор инструментов для анализа Методом Конечных Элементов в FreeCAD. В основном это значит объединение в одном GUI всех инструментов для выполнения анализа Методом Конечных Элементов.
Workflow
Шаги которые необходимо сделать чтобы произвести расчет МКЭ в GUI верстака FEM FreeCAD:
- Препроцессор
- Моделирование геометрии, здесь FreeCAD уже является вполне развитым приложением.
- Создать Расчет:
- Создать Сетку МКЭ из геометрической модели.
- Добавить Условия, такие как нагрузки и фиксаторы к расчетной модели.
- Добавить в расчетную модель Материал
- Решение уравнений
- Решение системы уравнений из FreeCAD GUI.
- Постпроцессор
- Посмотреть в FreeCAD GUI Результаты.
В версиях 0.15 и 0,16 FreeCAD модуль FEM может использовать платформы Windows, Mac OSX и Linux. Поскольку верстак FEM использует внешние программы, многие ручные настройки, требуемые для того, чтобы верстак FEM стал готов к использованию, зависит от используемой Вами операционной системы. Смотрите FEM Install.
Menu: Model
Analysis container: Creates a new container for a mechanical analysis. If a solid is selected in the tree view before clicking on it, the meshing dialog will be opened next.
Materials
Material for solid: Lets you select a material from the database.
Material for fluid: Lets you select a material from the database.
Nonlinear mechanical material: Lets you select a material from the database.
Material editor:: Lets you open the material editor to edit materials
Element Geometry
Electrostatic Constraints
Fluid constraints
Mechanical constraints
Constraint fixed: Used to define a fixed constraint on point/edge/face(s).
Constraint displacement: Used to define a displacement constraint on point/edge/face(s).
Constraint plane rotation: Used to define a plane rotation constraint on a planar face.
Constraint contact: Used to define a contact constraint between two faces.
Constraint transform:
Constraint force: Used to define a force in [N] applied uniformly to a selectable face in a definable direction.
Constraint pressure: Used to define a pressure constraint.
Constraint self weight: Used to define a gravity acceleration acting on a model.
Constraint bearing: Used to define a bearing constraint.
Constraint gear: Used to define a gear constraint.
Constraint pulley: Used to define a pulley constraint.
Thermal constraints
Constraint initial temperature: Used to define the initial temperature of a body.
Constraint heatflux: Used to define a heat flux constraint on a face(s).
Constraint temperature: Used to define a temperature constraint on a point/edge/face(s).
Constraint body heat source:
Menu: Mesh
FEM mesh from shape by Netgen:
FEM mesh from shape by GMSH:
FEM mesh boundary layer:
FEM mesh region:
FEM mesh group:
Nodes set: Creates/defines a node set from FEM mesh.
FEM mesh to mesh: Convert the surface of a FEM mesh to a mesh.
Menu: Solve
Solver Calculix CCX tools: Creates a new solver for this analysis. In most cases the solver is created together with the analysis.
Solver CalculiX:
Solver Elmer:
Solver Z88:
Equation heat:
Equation elasticity:
Equation electrostatic:
Equation fluxsolver:
Equation flow:
Solver job control: Opens the menu to adjust and start the selected solver.
Solver run calculation: Runs the selected solver of the active analysis.
Menu: Results
Results purge: Deletes the results of the active analysis.
Result show: Used to display the result of an analysis.
Post Apply changes:
Post Pipeline from result:
- File:Fem-warp.svg Post Create warp vector filter:
- File:Fem-clip-scalar.svg Post Create scalar clip filter:
- File:Fem-cut.svg Post Create cut filter:
- File:Fem-clip.svg Post Create clip filter:
Post Create data along line filter:
Post Create linearized stresses:
Post Create data at point filter:
- File:Fem-sphere.svg Post Create functions:
Menu: Utilities
Context Menu
Preferences
Preferences...: Preferences available in FEM Tools.
Учебники
Учебник 1 FEM CalculiX Cantilever 3D
Учебник 2 Учебник по МКЭ
Учебник 3 FEM Tutorial Python
Tutorial 4 FEM Shear of a Composite Block
Набор учебников по термомеханическому анализу Архив zip с запакованными файлами PDF
Video Tutorial 1 Forum post with you tube link
Video Tutorial 2 Forum post with you tube link
Further video Tutorials Forum post with you tube link
Ссылки
Установка FEM содержит детальное определение настройки работы модуля FEM.
FEM Mesh содержит дальнейшую информацию о сети МКЭ в FreeCAD
FEM Solver for further Informations about FEM Solvers in FEM Module,
FEM CalculiX содержит информацию об интерфейсе между модулем FEM и текущим решателем CalculiX
FEM Project содержит более детальную информацию о единицах, ограничениях и о проектировании модуля FEM.
FEM Concrete for informations about analysis's of concrete structures.