Std Measure/it: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 14: Line 14:
|Name/it=Misurare
|Name/it=Misurare
|MenuLocation=Strumenti → Misurare
|MenuLocation=Strumenti → Misurare
|Workbenches=All
|Workbenches=Tutti
|Version=1.0
|Version=1.0
|SeeAlso=[[Std_MeasureDistance/it|Misura la distanza]], [[Draft_Dimension/it|Draft Quotatura]]
|SeeAlso=[[Std_MeasureDistance/it|Misura la distanza]], [[Draft_Dimension/it|Draft Quotatura]]

Revision as of 23:36, 14 June 2024

Misurare

Posizione nel menu
Strumenti → Misurare
Ambiente
Tutti
Avvio veloce
Nessuno
Introdotto nella versione
1.0
Vedere anche
Misura la distanza, Draft Quotatura

Descrizione

Il comando Misurare dà accesso al Unified Measurement Facility introdotto in FreeCAD 1.0 durante il Progetto GSoC 2023. Ha sostituito i vecchi strumenti di misurazione, fornendo una funzionalità di misurazione versatile.

Utilizzo

  1. Optionally, preselect the geometrical entities to be used for measurement.
  2. Press the Std Measure button or select the Tools → Measure option from the menu.
  3. If no geometrical entities were preselected, do one of the following:
    • Select the geometrical entities while leaving the Mode as Auto so that the mode will be automatically determined based on the selection.
    • Choose the Mode other than Auto and then select the geometrical entities (clicking on them again will deselect them):
      • Distance - the shortest distance between the selected entities,
      • Angle - angle between the selected entities,
      • Length - length of the selected edge,
      • Position - coordinates of the selected vertex,
      • Area - area of the selected face,
      • Radius - radius of the selected circular edge,
      • Center of Mass - COM of the selected edge, face or solid (only if preselected in the tree).
  4. The measurement result will be shown in the Result field and on a label displayed in the 3D view. That label will also include an icon indicating the type of measurement. The labels can be customized in Preferences. They can be moved in the 3D view by dragging them with a cursor.
  5. Click Reset to delete the measurement or Save to keep it (saved measurements will be kept in Measurements container in the tree view). Click Close to exit the tool.