Std ProjectUtil/it: Difference between revisions

From FreeCAD Documentation
(Created page with "{{Docnav/it |Grafico delle dipendenze |Distanza |Menu Strumenti |IconL= |IconR=Std_MeasureDistance.s...")
No edit summary
Line 10: Line 10:
}}
}}


<!--Empty=1 to suppress icon-->
{{GuiCommand/it
{{GuiCommand/it
|Name=Std ProjectUtil
|Name=Std ProjectUtil

Revision as of 20:36, 11 May 2020

Utilità di progetto

Posizione nel menu
Strumenti → Utilità di progetto...
Ambiente
Tutti
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Nessuno

Descrizione

With the Std ProjectUtil command you can extract files from a FreeCAD project file (*.FCStd), which is in fact a ZIP file, and, after manual edits, create a new project file from them.

The Project utility dialog box

Utilizzo

Extract project

  1. Select the Tools → Project utility... option from the menu.
  2. The Project utility dialog box opens.
  3. Press the ... button to the right of Extract project → Source.
  4. Select the *.FCStd file you want to edit.
  5. Press the ... button to the right of Extract project → Destination.
  6. Select a folder where the project file should be extracted. It is advisable to select an empty folder.
  7. Press the Extract button.
  8. Press the Close button to close the dialog box.

Manual edits

It is important to realize that the files inside a FreeCAD project file are interlinked. Only editing a single file will typically lead to errors. To make consistent edits across multiple files use a good code editor, such as Notepad++ (for the Windows OS).

Create project

  1. Select the Tools → Project utility... option from the menu.
  2. The Project utility dialog box opens.
  3. Press the ... button to the right of Create project → Source.
  4. Select the Document.xml file. The command will be automatically find all linked files.
  5. Press the ... button to the right of Create project → Destination.
  6. Select a folder where the new project file should be created.
  7. Press the Create button.
  8. A new project file with a fixed name, project.fcstd, is created in the selected folder. There is no warning if a file with that name already exists.
  9. Optionally check the Load project file after creation checkbox.
  10. Press the Close button to close the dialog box.

Note