PartDesign Spiegeln

From FreeCAD Documentation
Revision as of 06:40, 30 April 2023 by Edi271 (talk | contribs) (Created page with "# Mache eines aus dem Folgenden: #* Doppel-Klicke das Spiegeln Objekt im Modellbaum. #* Rechts-Klicke das Spiegeln Objekt im Modellbaum und wähle {{MenuCommand|Edit Mirrored}} aus dem Kontextmenü. # Das {{MenuCommand|Mirrored parameters}} Eingabefenster öffnet. Siehe Optionen für weitere Informationen. # Drücke die {{Button|OK}} Schaltfläche um zu beenden..")

PartDesign Spiegeln

Menüeintrag
Part Design → Muster anwenden → Spiegeln
Arbeitsbereich
PartDesign
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
PartDesign MehrfachTransformation

Beschreibung

Das Werkzeug PartDesign Spiegeln spiegelt ein oder mehrere Formelemente über eine Ebene.

Ein Formelement Tasche, das aus einer Skizze erstellt wurde, die einen Kreis (A) enthält, wird verwendet, um ein gespiegeltes Formelement zu erstellen. Die vertikale Achse der Skizze (B) wird als Symmetrieachse verwendet, um die Spiegelebene festzulegen. Das Ergebnis (C) wird rechts angezeigt.

Anwendung

Erstellen

  1. Optional aktiviere den gewünschten Körper.
  2. Optional wähle eine oder mehrere Features.
  3. Es gibt mehrere Möglichkeiten um das Werkzeug zu starten:
    • Drücke die Mirrored Schaltfläche.
    • Wähle die Part Design → Apply a pattern → Mirrored ption aus dem Menü.
  4. Wenn es keinen aktiven Körper gibt, oder mehr als zwei Körper im Dokument vorhanden sind, dann öffnet der Active Body Required Dialog und zeigt an, dass einer aktiviert werden muss. Wenn es einen einzelnen Körper gibt, dann wird dieser automatisch aktiviert.
  5. Wenn keine Features ausgewählt wurden, dann öffnet das Select feature Eingabefenster: wähle eine oder mehrere (drücke die Ctrl Taste) aus der Liste und wähle die OK Schaltfläche.
  6. Das Mirrored parameters Eingabefenster öffnet. Siehe Optionen für weitere Informationen.
  7. Wähle die OK Schaltfläche um zu beenden.

Bearbeiten

  1. Mache eines aus dem Folgenden:
    • Doppel-Klicke das Spiegeln Objekt im Modellbaum.
    • Rechts-Klicke das Spiegeln Objekt im Modellbaum und wähle Edit Mirrored aus dem Kontextmenü.
  2. Das Mirrored parameters Eingabefenster öffnet. Siehe Optionen für weitere Informationen.
  3. Drücke die OK Schaltfläche um zu beenden..

Optionen

  • To add features:
    1. Press the Add feature button.
    2. Select a feature in the Tree view or the 3D view.
    3. Repeat to add more features.
  • To remove features:
    1. Press the Remove feature button.
    2. Do one of the following:
      • Select a feature in the Tree view or the 3D view.
      • Select a feature in the list and press the Del key.
      • Right-click a feature in the list and select Remove from the context menu.
    3. Repeat to remove more features.
  • If there are several features in the pattern, their order can be important. See PartDesign PolarPattern.
  • Specify the mirror Plane:
    • Vertical sketch axis: The Y axis of the sketch (the plane passes through this reference and the Z axis of the sketch, only available for sketch-based features).
    • Horizontal sketch axis: The X axis of the sketch (idem).
    • Construction line #: A separate entry for each construction line in the sketch (idem).
    • Base XY plane: The XY plane of the Body.
    • Base YZ plane: The YZ plane of the Body.
    • Base XZ plane: The XZ plane of the Body.
    • Select reference...: Select a planar face in the 3D view.
  • If the Update view checkbox is checked the view will update in real time.

Einschränkungen

Siehe PartDesign PolaresMuster.