PartDesign Симметрия

From FreeCAD Documentation
This page is a translated version of the page PartDesign Mirrored and the translation is 50% complete.
Outdated translations are marked like this.

Симметрия

Системное название
PartDesign_Mirrored
Расположение в меню
Part Design → Apply a pattern → Симметрия
Верстаки
PartDesign
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Множественное преобразование

Описание

The PartDesign Mirrored tool mirrors one or more features.

Объект для создания отверстия, созданный на основе эскиза, содержащего окружность (A), используется для создания зеркально отраженного объекта. Вертикальная ось эскиза (B) используется для определения оси симметрии. Результат (C) показан справа.

Применение

Create

  1. Optionally activate the correct Body.
  2. Optionally select one or more features.
  3. There are several ways to invoke the tool:
    • Press the Mirrored button.
    • Select the Part Design → Apply a pattern → Mirrored option from the menu.
  4. If there is no active Body, and there are two or more Bodies in the document, the Active Body Required dialog will open and prompt you to activate one. If there is a single Body it will be activated automatically.
  5. If no features were selected the Select feature task panel opens: select one or more (hold down the Ctrl key) from the list and press the OK button.
  6. The Mirrored parameters task panel opens. See Options for more information.
  7. Press the OK button to finish.

Edit

  1. Do one of the following:
    • Double-click the Mirrored object in the Tree view.
    • Right-click the Mirrored object in the Tree view and select Edit Mirrored from the context menu.
  2. The Mirrored parameters task panel opens. See Options for more information.
  3. Press the OK button to finish.

Опции

  • To add features:
    1. Press the Add feature button.
    2. Select a feature in the Tree view or the 3D view.
    3. Repeat to add more features.
  • To remove features:
    1. Press the Remove feature button.
    2. Do one of the following:
      • Select a feature in the Tree view or the 3D view.
      • Select a feature in the list and press the Del key.
      • Right-click a feature in the list and select Remove from the context menu.
    3. Repeat to remove more features.
  • If there are several features in the pattern, their order can be important. See PartDesign PolarPattern.
  • Specify the mirror Plane:
    • Vertical sketch axis: The Y axis of the sketch (the plane passes through this reference and the Z axis of the sketch, only available for sketch-based features).
    • Horizontal sketch axis: The X axis of the sketch (idem).
    • Construction line #: A separate entry for each construction line in the sketch (idem).
    • Base XY plane: The XY plane of the Body.
    • Base YZ plane: The YZ plane of the Body.
    • Base XZ plane: The XZ plane of the Body.
    • Select reference...: Select a planar face in the 3D view.
  • If the Update view checkbox is checked the view will update in real time.

Ограничения

Смотрите PartDesign Круговой массив.