PartDesign: Oglindirea/ Mirrored

From FreeCAD Documentation
This page is a translated version of the page PartDesign Mirrored and the translation is 54% complete.
Outdated translations are marked like this.

PartDesign Mirrored

Menu location
PartDesign → Mirrored
Workbenches
PartDesign, Complete
Default shortcut
None
Introduced in version
-
See also
None

Descriere

Instrumentul Mirrored simetrizează o funcție în plan. Începând cu v0.17, instrumentul poate simetriza multiple funcții(onalități) .

"Deasupra: o funcție Pocket a fost creată dintr-o schiță care conține un cerc (A), Pocket-ul a fost ulterior folosit pentru a crea o caracteristică Mirror. Axa verticală a schiței (B) a fost utilizată ca axă de simetrie. Rezultatul (C) este afișat în partea dreaptă. „“

Cum se folosește

Create

  1. Optionally activate the correct Body.
  2. Optionally select one or more features.
  3. There are several ways to invoke the tool:
    • Press the Mirrored button.
    • Select the Part Design → Apply a pattern → Mirrored option from the menu.
  4. If there is no active Body, and there are two or more Bodies in the document, the Active Body Required dialog will open and prompt you to activate one. If there is a single Body it will be activated automatically.
  5. If no features were selected the Select feature task panel opens: select one or more (hold down the Ctrl key) from the list and press the OK button.
  6. The Mirrored parameters task panel opens. See Options for more information.
  7. Press the OK button to finish.

Edit

  1. Do one of the following:
    • Double-click the Mirrored object in the Tree view.
    • Right-click the Mirrored object in the Tree view and select Edit Mirrored from the context menu.
  2. The Mirrored parameters task panel opens. See Options for more information.
  3. Press the OK button to finish.

Opţiuni

  • To add features:
    1. Press the Add feature button.
    2. Select a feature in the Tree view or the 3D view.
    3. Repeat to add more features.
  • To remove features:
    1. Press the Remove feature button.
    2. Do one of the following:
      • Select a feature in the Tree view or the 3D view.
      • Select a feature in the list and press the Del key.
      • Right-click a feature in the list and select Remove from the context menu.
    3. Repeat to remove more features.
  • If there are several features in the pattern, their order can be important. See PartDesign PolarPattern.
  • Specify the mirror Plane:
    • Vertical sketch axis: The Y axis of the sketch (the plane passes through this reference and the Z axis of the sketch, only available for sketch-based features).
    • Horizontal sketch axis: The X axis of the sketch (idem).
    • Construction line #: A separate entry for each construction line in the sketch (idem).
    • Base XY plane: The XY plane of the Body.
    • Base YZ plane: The YZ plane of the Body.
    • Base XZ plane: The XZ plane of the Body.
    • Select reference...: Select a planar face in the 3D view.
  • If the Update view checkbox is checked the view will update in real time.

Limite

See PartDesign PolarPattern.