Std ViewDockUndockFullscreen/de: Difference between revisions

From FreeCAD Documentation
(Created page with "* Mehrfache 3D Ansichten für dasselbe Dokument können mit dem Befehl Std AnsichtErzeugen erstellt werden. * 3D Ansichten können auch mit dem Befehl ...")
(Created page with "Die '''Angedockt''' Menüoption koppelt die aktive 3D Ansicht innerhalb der FreeCAD Hauptoberfläche an.")
Line 30: Line 30:
===Beschreibung===
===Beschreibung===


The '''Docked''' menu option docks the active [[3D_view|3D view]] inside the main FreeCAD interface.
Die '''Angedockt''' Menüoption koppelt die aktive [[3D_view/de|3D Ansicht]] innerhalb der FreeCAD Hauptoberfläche an.


===Usage===
===Usage===

Revision as of 14:10, 5 June 2020

Std AnsichtAnkoppelAbkoppelnVollbild

Menüeintrag
Ansicht → Dokumentfenster
Arbeitsbereich
Alle
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
Erstelle neue Ansicht‏‎, Bild speichern..., Bildschirm einfrieren‏‎, Fenster

Einleitung

3D Ansichten kann abgekoppelt werden von der Haupt FreeCAD Oberfläche und auf eine anderen Bildschirm verschoben werden, zum Beispiel.

Eine abgekoppelte 3D Ansicht

Angekoppelt

Beschreibung

Die Angedockt Menüoption koppelt die aktive 3D Ansicht innerhalb der FreeCAD Hauptoberfläche an.

Usage

  1. Activate an undocked 3D view.
  2. There are several ways to invoke the option:
    • If there are no docked 3D views: select the View → Document window → Docked option from the menu.
    • Select the Document window → Docked option from the 3D view context menu.
    • Use the keyboard shortcut: V then D.

Undocked

Description

The Undocked menu option undocks the active 3D view from the main FreeCAD interface.

Usage

  1. Activate a docked 3D view.
  2. There are several ways to invoke the option:
    • Select the View → Document window → Undocked option from the menu.
    • Select the Document window → Undocked option from the 3D view context menu.
    • Use the keyboard shortcut: V then U.

Hinweise

  • Mehrfache 3D Ansichten für dasselbe Dokument können mit dem Befehl Std AnsichtErzeugen erstellt werden.
  • 3D Ansichten können auch mit dem Befehl Std AnsichtVollbild angekoppelt und abgekoppelt werden.