Std SelForward/de: Difference between revisions

From FreeCAD Documentation
(Created page with "{{GuiCommand/de |Name=Std SelForward |Name/de=Std AuswahlVorwärts |MenuLocation=Ansicht → Baumansicht-Aktionen → Vorwärts |Workbenches=Alle |Shortcut={{KEY|S}} {{KEY|F}} |Version=0.19 |SeeAlso=Std AuswahlZurück }}")
(Created page with "Der Befehl '''Std AuswahlVorwärts''' stellt die nächste aufgezeichnete Auswahl in der Baumansicht wieder her. Beachte, dass Auswahlen nur dann aufgezeichnet werden, wenn der Modus BaumAuswahlAufzeichnen eingeschaltet ist.")
Line 23: Line 23:
==Beschreibung==
==Beschreibung==


The '''Std SelForward''' command restores the next recorded [[Tree_view|Tree view]] selection. Note that selections are only recorded if [[Std_TreeRecordSelection|Tree RecordSelection mode]] is switched on.
Der Befehl '''Std AuswahlVorwärts''' stellt die nächste aufgezeichnete Auswahl in der [[Tree_view/de|Baumansicht]] wieder her. Beachte, dass Auswahlen nur dann aufgezeichnet werden, wenn der Modus [[Std_TreeRecordSelection/de| BaumAuswahlAufzeichnen]] eingeschaltet ist.


<span id="Usage"></span>
<span id="Usage"></span>

Revision as of 08:30, 11 October 2023

Std AuswahlVorwärts

Menüeintrag
Ansicht → Baumansicht-Aktionen → Vorwärts
Arbeitsbereich
Alle
Standardtastenkürzel
S F
Eingeführt in Version
0.19
Siehe auch
Std AuswahlZurück

Beschreibung

Der Befehl Std AuswahlVorwärts stellt die nächste aufgezeichnete Auswahl in der Baumansicht wieder her. Beachte, dass Auswahlen nur dann aufgezeichnet werden, wenn der Modus BaumAuswahlAufzeichnen eingeschaltet ist.

Anwendung

  1. There has to be a next Tree view selection.
  2. There are several ways to invoke the command:
    • Click on the black down arrow to the right of the button and select the Selection Forward option from the flyout. Note: the button image will change depending on the selected option.
    • Select the View → TreeView actions → Selection Forward option from the menu.
    • Use the keyboard shortcut: S then F.
  3. The next selection is restored.

Hinweise

  • Only Tree view selections are recorded. To record a selection made in the 3D view a final object has to be added in the Tree view.