Std ProjektHilfsprogramm

From FreeCAD Documentation
Revision as of 18:00, 19 August 2020 by Maker (talk | contribs) (Created page with "{{Docnav/de |Std AbhängigkeitsGraph |Std AbstandMessen |Std Werkzeuge Menü |IconL= |IconR=Std_Mea...")

Std ProjectUtil

Menu location
Tools → Project utility...
Workbenches
All
Default shortcut
None
Introduced in version
-
See also
None

Beschreibung

Mit dem Std ProjectUtil Befehl kannst du Dateien aus einer FreeCAD Projektdatei (*.FCStd), die eigentlich eine ZIP Datei ist, extrahieren und nach manueller Bearbeitung daraus eine neue Projektdatei erstellen.

The Project utility dialog box

Anwendung

Projekt extrahieren

  1. Select the Tools → Project utility... option from the menu.
  2. The Project utility dialog box opens.
  3. Press the ... button to the right of Extract project → Source.
  4. Select the *.FCStd file you want to edit.
  5. Press the ... button to the right of Extract project → Destination.
  6. Select a folder where the project file should be extracted. It is advisable to select an empty folder.
  7. Press the Extract button.
  8. Press the Close button to close the dialog box.

Manual edits

It is important to realize that the files inside a FreeCAD project file are interlinked. Only editing a single file will typically lead to errors. To make consistent edits across multiple files use a good code editor, such as Notepad++ (for the Windows OS).

Create project

  1. Select the Tools → Project utility... option from the menu.
  2. The Project utility dialog box opens.
  3. Press the ... button to the right of Create project → Source.
  4. Select the Document.xml file. The command will be automatically find all linked files.
  5. Press the ... button to the right of Create project → Destination.
  6. Select a folder where the new project file should be created.
  7. Press the Create button.
  8. A new project file with a fixed name, project.fcstd, is created in the selected folder. There is no warning if a file with that name already exists.
  9. Optionally check the Load project file after creation checkbox.
  10. Press the Close button to close the dialog box.

Notes