Arch Fachwerkträger
Arch Truss |
Menu location |
---|
Arch → Truss |
Workbenches |
Arch |
Default shortcut |
None |
Introduced in version |
0.19 |
See also |
None |
Beschreibung
The Arch Truss tool builds a truss object, either from a selected linear object (lie a Draft Line or Sketch), or from scratch, if no object is selected whn launching the command.
Anwendung
Erzeugen aus einem ausgewählten Objekt
- Use a workbench of your choice to create a single line
- Select that line
- Press the Arch Truss button
- Adjust the truss properties to your liking
Erzeugen von Grundauf
- Make sure nothing is selected
- Press the Arch Truss button
- Click in the 3D view to define a first point, or manually enter X, Y and Z coordinates
- Click in the 3D view to define a second point, or manually enter X, Y and Z coordinates
- Adjust the truss properties to your liking
Eigenschaften
Daten
- DatenTrussAngle: The angle of the truss
- DatenSlantType: The slant type of this truss
- DatenNormal: The normal direction of this truss
- DatenHeightStart: The height of the truss at the start position
- DatenHeightEnd: The height of the truss at the end position
- DatenStrutStartOffset: An optional start offset for the top strut
- DatenStrutEndOffset: An optional end offset for the top strut
- DatenStrutHeight: The height of the main top and bottom elements of the truss
- DatenStrutWidth: The width of the main top and bottom elements of the truss
- DatenRodType: The type of the middle element of the truss
- DatenRodDirection: The direction of the rods
- DatenRodSize: The diameter or side of the rods
- DatenRodSections: The number of rod sections
- DatenRodEnd: If the truss has a rod at its endpoint or not
- DatenRodMode: How to draw the rods
Skripten
The Truss tool can be used in macros and from the Python console by using the following function:
Truss = makeFence([baseobj])
Example:
import FreeCAD
import Draft
import Arch
p1 = FreeCAD.Vector(0,0,0)
p2 = FreeCAD.Vector(2000,0,0)
baseline = Draft.makeLine(p1,p2)
truss = Arch.makeTruss(baseline)
truss.HeightStart = 200
truss.HeightEnd = 400
# adjust other needed properties
Arch
- Elemente: Wand, Struktur, Dach, Fenster, Tür, Treppe, Raum, Rahmen, Ausstattung; Pipe, Pipe Connector; Schedule
- Bewehrung: Bewehrungsstab; Straight Rebar, UShape Rebar, LShape Rebar, Bent Shape Rebar, Stirrup Rebar, Helical Rebar
- Paneele: Panel, Panel Cut, Panel Sheet, Nest
- Material: Material, Multi-Material
- Organisation: Baugrund, Referenz,Gebäude, Geschoss, Gebäudeteil, Schnittebene
- Achsen: Achse, Achsensystem, Raster
- Änderungen: Schneiden in einer Ebene, Komponente hinzufügen, Teil entfernen, Survey
- Dienstprogramme: Komponente, Komponente klonen, Netz zerlegen, Netz in Form umwandeln, Wähle nicht-mehrfache Polygonnetze, Entferne Form, Schließt Löcher, Wände zusammenfügen, Check, Ifc Explorer, Toggle IFC Brep flag, 3 Ansichten aus Netz, Erstelle IFC Kalkulationstabelle..., Toggle Subcomponents
- Additional: Einstellungen, Import-Export Preferences (IFC, DAE, OBJ, JSON, 3DS); Arch API
Anwenderdokumentation
- Erste Schritte
- Installation: Herunterladen, Windows, Linux, Mac, Zusätzliche Komponenten, Docker, AppImage, Ubuntu Snap
- Grundlagen: Über FreeCAD, Graphische Oberfläche, Mausbedienung, Auswahlmethoden, Objektname, Voreinstellungseditor, Arbeitsbereiche, Dokumentstruktur, Objekteigenschaften, FreeCAD unterstützen, Spenden
- Hilfe: Anleitungen, Videoanleitungen
- Arbeitsbereiche: Std Base, Arch, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework