Sketcher Workbench/tr: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
 
(3 intermediate revisions by the same user not shown)
Line 7: Line 7:
|IconR=Workbench_Spreadsheet.svg
|IconR=Workbench_Spreadsheet.svg
}}
}}

{{VeryImportantMessage|This page has been marked for translation. But it is still a work in progress!!!}}


[[Image:Workbench_Sketcher.svg|thumb|128px|Sketcher workbench icon]]
[[Image:Workbench_Sketcher.svg|thumb|128px|Sketcher workbench icon]]
Line 19: Line 21:
Genel olarak, bir 2D geometrisi çoğu CAD modelinin başlangıç ​​noktası olarak kabul edilir, çünkü bir 2D çizimi, 3D şekli oluşturmak için "ekstrüzyona sokulabilir"; Önceden oluşturulmuş 3D şekillerin üstünde oyuklar, çıkıntılar veya ekstrüzyonlar gibi başka özellikler oluşturmak için başka 2D çizimler de kullanılabilir. [[Part_Workbench/tr|Parça Tezgahında]] tanımlanan katılarda, Boolean işlemleri ile birlikte Eskiz, üretken katı şekilli tasarımın çekirdeğini oluşturur.
Genel olarak, bir 2D geometrisi çoğu CAD modelinin başlangıç ​​noktası olarak kabul edilir, çünkü bir 2D çizimi, 3D şekli oluşturmak için "ekstrüzyona sokulabilir"; Önceden oluşturulmuş 3D şekillerin üstünde oyuklar, çıkıntılar veya ekstrüzyonlar gibi başka özellikler oluşturmak için başka 2D çizimler de kullanılabilir. [[Part_Workbench/tr|Parça Tezgahında]] tanımlanan katılarda, Boolean işlemleri ile birlikte Eskiz, üretken katı şekilli tasarımın çekirdeğini oluşturur.
</div>
</div>

Together with boolean operations defined in the [[Image:Workbench_Part.svg|16px]] [[Part Workbench|Part Workbench]], the Sketcher Workbench, or "The Sketcher" for short, forms the basis of the [[Constructive_solid_geometry|constructive solid geometry]] (CSG) method of building solids. Together with [[Image:Workbench_PartDesign.svg|16px]] [[PartDesign_Workbench|PartDesign Workbench]] operations, it also forms the basis of the [[Feature_editing|feature editing]] methodology of creating solids. But many other workbenches use sketches as well.


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
Eskiz tezgahı, 2D şekillerin kesin geometrik tanımları izlemesine izin veren "kısıtlamalara" sahiptir. Bir kısıtlayıcı çözücü, 2D geometrinin kısıtlı boyutunu hesaplar ve çizim serbestlik derecelerinin etkileşimli olarak araştırılmasını sağlar.
Eskiz tezgahı, 2D şekillerin kesin geometrik tanımları izlemesine izin veren "kısıtlamalara" sahiptir. Bir kısıtlayıcı çözücü, 2D geometrinin kısıtlı boyutunu hesaplar ve çizim serbestlik derecelerinin etkileşimli olarak araştırılmasını sağlar.
</div>

<div class="mw-translate-fuzzy">
==== Eskiz nerelerde kullanılmaz ====
Eskiz, 2D planlar üretmek için tasarlanmamıştır. Eskizler, katı bir özellik oluşturmak için kullanıldığında, otomatik olarak gizlenir. Kısıtlamalar yalnızca Eskiz düzenleme modunda görülebilir.
</div>
</div>


Line 28: Line 37:
Tamamen kısıtlanmış bir eskiz}}
Tamamen kısıtlanmış bir eskiz}}


== Constraints ==
== Basics of constraint sketching ==


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
==== Kısıtlama nedir ====
== Kısıtlı eskizin temelleri ==
Boyutlar yerine, kısıtlamalar bir nesnenin serbestlik derecesini sınırlamak için kullanılır. Örneğin, kısıtlamaları olmayan bir çizgi 4 [[#Degrees Of Freedom|Serbestlik Derecesine]] (" DOF " olarak kısaltılır) sahiptir: yatay ya da dikey olarak hareket ettirilebilir, uzatılabilir ve döndürülebilir.
Eskizin nasıl çalıştığını anlamak için, onu "geleneksel" taslak ile karşılaştırmak faydalı olabilir.
</div>
</div>


Yatay veya dikey bir sınırlama veya bir açı sınırlaması (başka bir çizgiye veya eksenlerden birine göre) uygulamak, dönme kapasitesini sınırlar ve böylece 3 serbestlik derecesine sahip olur. Çizginin herhangi bir noktasını, Orijin ile ilişkilendirmek 2 serbestlik derecesini ortadan kaldırır. Bir boyut sınırlaması uygulamak son serbestlik derecesini ortadan kaldıracaktır. Çizgi daha sonra '''tamamen kısıtlı''' olarak kabul edilir .
==== Traditional Drafting ====


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
Birden fazla nesne aralarında sınırlandırılabilir. İki çizgi, noktaları birbiriyle çakışan nokta kısıtı ile birleştirilebilir. Aralarında bir açı belirlenebilir veya dik olarak ayarlanabilir. Bir çizgi, bir yay veya bir daireye teğet olabilir vb. Birden fazla nesneyi içeren karmaşık bir Eskiz, çok sayıda farklı çözüme sahip olacak ve '''tamamen kısıtlı''' olması, bu olası çözümlerden yalnızca birinin uygulanan kısıtlamalara dayanarak ulaşıldığı anlamına gelir.
==== Geleneksel Taslak ====
CAD taslağının geleneksel yolu eski [http://en.wikipedia.org/wiki/Drawing_board çizim tahtasından] miras kalmıştır. [http://en.wikipedia.org/wiki/Multiview_orthographic_projection Ortogonal (2D) görünümler] elle çizilir, teknik çizimler (aynı zamanda planlar olarak da bilinir) üretmek için tasarlanmıştır. Nesneler tam olarak istenen boyuta veya ölçülere çekilir. (0,0) 'dan başlayarak 100mm uzunluğunda yatay bir çizgi çizmek istiyorsanız, çizgi aracını etkinleştirin, ekrana tıklayın veya ilk nokta için (0,0) koordinatlarını girin, ardından ikinci bir tıklama yapın ikinci nokta koordinatlarını (100,0) girin. Veya çizginizi konumuna bakmadan çizer ve daha sonra hareket ettirirsiniz. Geometrilerinizi çizmeyi tamamladığınızda, onları ölçülendirirsiniz..
</div>
</div>

==== Constraint Sketching ====


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
İki tür kısıtlama vardır: geometrik ve boyutsal. Bunlar aşağıdaki [[#The tools|'Araçlar']] bölümünde ayrıntılı olarak açıklanmaktadır .
==== Kısıtlı Eskiz ====
'''Eskiz''' bu mantıktan uzaktır. Nesnelerin tam olarak istediğiniz gibi çizilmesi gerekmez, çünkü bunlar daha sonra kısıtlamalar ile tanımlanacaktır. Nesneler gelişigüzel bir şekilde çizilebilir ve kısıtlanmadıkları sürece değiştirilebilir. "Yüzer" durumunda ve hareket ettirilebilir, gerilebilir, döndürülebilir, ölçeklendirilebilir vb. Bu, tasarım sürecinde büyük esneklik sağlar.
</div>
</div>


==== What are constraints? ====
=== Edit constraints ===


When a [[Sketcher_ToggleDrivingConstraint|driving dimensional constraint]] is created, and if the {{MenuCommand|Ask for value after creating a dimensional constraint}} [[Sketcher_Preferences#Display|preference]] is selected (default), a dialog opens to edit its value.
<div class="mw-translate-fuzzy">
==== Kısıtlama nedir ====
Boyutlar yerine, kısıtlamalar bir nesnenin serbestlik derecesini sınırlamak için kullanılır. Örneğin, kısıtlamaları olmayan bir çizgi 4 [[#Degrees Of Freedom|Serbestlik Derecesine]] (" DOF " olarak kısaltılır) sahiptir: yatay ya da dikey olarak hareket ettirilebilir, uzatılabilir ve döndürülebilir.
</div>


[[Image:Sketcher_Edit_Constraint.png|Sketcher_Edit_Constraint.png]]
Yatay veya dikey bir sınırlama veya bir açı sınırlaması (başka bir çizgiye veya eksenlerden birine göre) uygulamak, dönme kapasitesini sınırlar ve böylece 3 serbestlik derecesine sahip olur. Çizginin herhangi bir noktasını, Orijin ile ilişkilendirmek 2 serbestlik derecesini ortadan kaldırır. Bir boyut sınırlaması uygulamak son serbestlik derecesini ortadan kaldıracaktır. Çizgi daha sonra '''tamamen kısıtlı''' olarak kabul edilir .


You can enter a numerical value or an [[Expressions|expression]], and it is possible to name the constraint to facilitate its use in other expressions. You can also check the {{MenuCommand|Reference}} checkbox to switch the constrain to reference mode.
<div class="mw-translate-fuzzy">
Birden fazla nesne aralarında sınırlandırılabilir. İki çizgi, noktaları birbiriyle çakışan nokta kısıtı ile birleştirilebilir. Aralarında bir açı belirlenebilir veya dik olarak ayarlanabilir. Bir çizgi, bir yay veya bir daireye teğet olabilir vb. Birden fazla nesneyi içeren karmaşık bir Eskiz, çok sayıda farklı çözüme sahip olacak ve '''tamamen kısıtlı''' olması, bu olası çözümlerden yalnızca birinin uygulanan kısıtlamalara dayanarak ulaşıldığı anlamına gelir.
</div>


To edit the value of an existing dimensional constraint do one of the following:
<div class="mw-translate-fuzzy">
* Double-click the constraint value in the [[3D_view|3D view]].
İki tür kısıtlama vardır: geometrik ve boyutsal. Bunlar aşağıdaki [[#The tools|'Araçlar']] bölümünde ayrıntılı olarak açıklanmaktadır .
* Double-click the constraint in the [[Sketcher_Dialog|Sketcher Dialog]].
</div>
* Right-click the constraint in the Sketcher Dialog and select the {{MenuCommand|Change value}} option from the context menu.


=== Reposition constraints ===
==== What the Sketcher is not good for ====


Dimensional constraints can be repositioned in the 3D view by dragging. Hold down the left mouse button over the constraint value and move the mouse. The symbols of geometric constraints are positioned automatically and cannot be moved.
<div class="mw-translate-fuzzy">
==== Eskiz nerelerde kullanılmaz ====
Eskiz, 2D planlar üretmek için tasarlanmamıştır. Eskizler, katı bir özellik oluşturmak için kullanıldığında, otomatik olarak gizlenir. Kısıtlamalar yalnızca Eskiz düzenleme modunda görülebilir.
</div>


== Profile sketches ==
<div class="mw-translate-fuzzy">
Çıktı almak için yalnızca 2D görünümler oluşturmanız gerekiyorsa ve 3D modeller oluşturmak istemiyorsanız, [[Draft_Workbench/tr|Taslak tezgahını]] inceleyin.
</div>


To create a sketch that can be used as a profile for generating solids certain rules must be followed:
The tool [[Draft_Draft2Sketch|Draft2Sketch]] converts a Draft object to a Sketch object, and vice versa. Many tools that require a 2D element as input work with either type of object as an internal conversion is done automatically.
* The sketch must contain only closed contours. Gaps between endpoints, however small, are not allowed.
* Contours can be nested, to create voids, but should not self-intersect or intersect other contours.
* Contours cannot share edges with other contours. Duplicate edges must be avoided.
* T-connections, that is more than two edges sharing a common point, or a point touching an edge, are not allowed.


These rules do not apply to construction geometry (default color blue), which is not shown outside edit mode, or if the sketch is used for a different purpose. Depending on the workbench and the tool that will use the profile sketch, additional restrictions may apply.
== Sketching Workflow ==


== Drawing aids ==
<div class="mw-translate-fuzzy">
== Eskiz iş akışı ==
Bir Eskiz her zaman 2 boyutludur (2D). Bir katı oluşturmak için, önce kapalı bir alandan oluşan 2D Eskiz'i oluşturulur, daha sonra kalınlık ver veya Döndür komutlarıyla 3D boyut eklenir. Böylece 2D Eskiz'den bir 3D katı oluşturulur.
</div>


The Sketcher Workbench has several drawing aids and other features that can help when creating geometry and applying constraints.
<div class="mw-translate-fuzzy">
Eskiz, birbirine geçen bölümlere sahipse, bölüm üzerinde olmayan bir noktada veya bitişik bölümlerin bitiş noktaları arasında boşluk bulunan yerler, '''Kalınlık ver'''' veya '''Döndür''' işlemleriyle bir katı oluşturmaz. Bu kuralın istisnası, Yapı (mavi) Geometri için geçerli olmamasıdır.
</div>


=== Continue modes ===
<div class="mw-translate-fuzzy">
Kapalı alanda daha küçük,alanla örtüşmeyen alanlara sahip olabiliriz. Bunlar, 3D katı oluşturulduğunda geçersiz olur.
</div>


There are two continue modes: '''Geometry creation "Continue Mode"''' and '''Constraint creation "Continue Mode"'''. If these are checked (default) in the [[Sketcher_Preferences#Display|preferences]], related tools will restart after finishing. To exit an continuous tool press {{KEY|Esc}} or the right mouse button. This must be repeated if a continuous geometry tool has already received input. You can also exit a continuous tool by starting another geometry or constraint creation tool. Note that pressing {{KEY|Esc}} if no tool is active will exit sketch edit mode. Uncheck the '''Esc can leave sketch edit mode''' [[Sketcher_Preferences#General|preference]] if you often inadvertently press {{KEY|Esc}} too many times.
Once a Sketch is fully constrained, the Sketch features will turn green; Construction Geometry will remain blue. It is usually "finished" at this point and suitable for use in creating a 3D solid. However, once the Sketch dialog is closed it may be worthwhile going to [[Image:Workbench_Part.svg|24px]] [[Part_Workbench|Part Workbench]] and running {{Button|[[File:Part_CheckGeometry.svg|16px]] [[Part_CheckGeometry|Check geometry]]}} to ensure there are no features in the Sketch which may cause later problems.

=== Auto constraints ===

In sketches that have '''Auto constraints''' checked (default) several constraints are applied automatically. The icon of a proposed automatic constraint is shown next to the cursor when it is placed correctly. Left-Clicking will then apply that constraint. This is a per-sketch setting that can be changed in the [[Sketcher_Dialog#Constraints|Sketcher Dialog]] or by changing the {{PropertyView|Autoconstraints}} [[Property_editor|property]] of the sketch.

The following constraints are applied automatically:
* [[Image:Sketcher_ConstrainCoincident.svg|16px]] [[Sketcher_ConstrainCoincident|Coincident]]
* [[Image:Sketcher_ConstrainPointOnObject.svg|16px]] [[Sketcher_ConstrainPointOnObject|Point on object]]
* [[Image:Sketcher_ConstrainHorizontal.svg|16px]] [[Sketcher_ConstrainHorizontal|Horizontal]]
* [[Image:Sketcher_ConstrainVertical.svg|16px]] [[Sketcher_ConstrainVertical|Vertical]]
* [[Image:Sketcher_ConstrainTangent.svg|16px]] [[Sketcher_ConstrainTangent|Tangent]]
* {{Version|1.0}}: [[Image:Sketcher_ConstrainSymmetric.svg|16px]] [[Sketcher_ConstrainSymmetric|Symmetric]] (line midpoint)

=== Snapping ===

{{Version|0.21}}

It is possible to [[Sketcher_Snap|snap]] to grid lines and grid intersection, to edges of geometry and midpoints of lines and arcs, and to certain angles. Please note that snapping does not produce constraints in and of itself. For example, only if [[#Auto constraints|Auto constraints]] is switched on will snapping to an edge produce a [[Sketcher_ConstrainPointOnObject|Point on object constraint]]. But just picking a point on the edge would then have the same result.

=== On-View-Parameters ===

{{Version|1.0}}

Depending on the selected option in the [[Sketcher_Preferences#General|preferences]] only the dimensional On-View-Parameters or both the dimensional and the positional On-View-Parameters can be enabled. Positional parameters allow the input of exact coordinates, for example the center of a circle, or the start point of a line. Dimensional parameters allow the input of exact dimensions, for example the radius of a circle, or the length and angle of a line. On-View-Parameters are not available for all tools.

[[Image:Sketcher_On_view_parameters_positional.png]]
{{Caption|Determining the center point of a circle with the positional parameters enabled}}

[[Image:Sketcher_On_view_parameters_dimensional.png]]
{{Caption|Determining the radius of a circle with the dimensional parameters enabled}}

If values are entered and confirmed by pressing {{KEY|Enter}} or {{KEY|Tab}}, related constraints are added automatically. If two parameters are displayed at the same time, for example the X and Y coordinate of a point, it is possible to enter one value and pick a point to define the other. Depending on the object additional constraints may be required to fully constrain it. Constraints resulting from On-View-Parameters take precedence over those that may result from [[Sketcher_Dialog#Constraints|Auto constraints]].

[[Image:Sketcher_ArcExample3.png|300px]]
{{Caption|Arc created by entering all On-View-Parameters with resulting automatically created constraints}}

=== Coordinate display ===

If the '''Show coordinates beside cursor while editing''' [[Sketcher_Preferences#Display|preference]] is checked (default), the parameters of the current geometry tool (coordinates, radius, or length and angle) are displayed next to the cursor. This is deactivated while On-View-Parameters are shown.

== Selection methods ==

While a sketch is in edit mode the following selection methods can be used:

=== 3D view element selection ===

As elsewhere in FreeCAD, an element can be selected in the [[3D_view|3D view]] with a single left mouse click. But there is no need to hold down the {{KEY|Ctrl}} key when selecting multiple elements. Holding down that key is possible though and has the advantage that you can miss-click without losing the selection. Edges, points and constraints can be selected in this manner.

=== 3D view box selection ===

Box selection in the 3D view works without using [[Std_BoxSelection|Std BoxSelection]] or [[Std_BoxElementSelection|Std BoxElementSelection]]:
# Make sure that no tool is active.
# Do one of the following:
#* Click in an empty area and drag a rectangle from left to right to select elements that lie completely inside the rectangle.
#* Click in an empty area and drag a rectangle from right to left to also select elements that touch or cross the rectangle.

You can box-select edges and points, constraints cannot be box-selected.

=== 3D view connected geometry selection ===

{{Version|1.0}}

Double-clicking an edge in the 3D view will select all edges directly and indirectly connected with that edge via endpoints. There is no need for the edges to be connected with [[Sketcher_ConstrainCoincident|Coincident constraints]], endpoints need only have the same coordinates.

=== Sketcher Dialog selection ===

Edges and points can also be selected from the Elements section of the [[Sketcher_Dialog|Sketcher Dialog]], and constraints from the Constraints section of that dialog.

== Copy, cut and paste ==

{{Version|1.0}}

The standard keyboard shortcuts, {{KEY|Ctrl}}+{{KEY|C}}, {{KEY|Ctrl}}+{{KEY|X}} and {{KEY|Ctrl}}+{{KEY|V}}, can be used to copy, cut and paste selected Sketcher geometry including related constraints. But these tools are also available from the {{MenuCommand|Sketch → Sketcher tools}} menu. They can be used within the same sketch but also between different sketches or separate instances of FreeCAD. Since the data is copied to the clipboard in the form of Python code, it can be used in other ways too (e.g. shared on the forum).


== Tools ==
== Tools ==
Line 102: Line 168:
Eskiz Tezgahı araçlarının tümü, Eskiz Tezgahını yüklediğinizde görünen Eskiz menüsünde bulunur.
Eskiz Tezgahı araçlarının tümü, Eskiz Tezgahını yüklediğinizde görünen Eskiz menüsünde bulunur.
</div>
</div>

Some tools are also available from the [[3D_view|3D view]] context menu while a sketch is in edit mode, or from the context menus of the [[Sketcher_Dialog|Sketcher Dialog]].


{{Version|0.21}}: If a sketch is in edit mode the Structure toolbar is hidden as none of its tools can then be used.
{{Version|0.21}}: If a sketch is in edit mode the Structure toolbar is hidden as none of its tools can then be used.
Line 161: Line 229:
==== Other ====
==== Other ====


* [[File:Sketcher_StopOperation.svg|32px]] [[Sketcher_StopOperation|Stop operation]]: When in edit mode, stop the current operation, whether that is drawing, setting constraints, etc.
* [[File:Sketcher_StopOperation.svg|32px]] [[Sketcher_StopOperation|Stop operation]]: Stops any currently running geometry or constraint creation tool.


<span id="Sketcher_geometries"></span>
<span id="Sketcher_geometries"></span>
Line 170: Line 238:
<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
* [[Image:Sketcher_CreatePoint.png|32px]] [[Sketcher_CreatePoint/tr|Nokta]]: Nokta çizer.
* [[Image:Sketcher_CreatePoint.png|32px]] [[Sketcher_CreatePoint/tr|Nokta]]: Nokta çizer.
</div>

* <span id="Sketcher_CompLine">[[Image:Sketcher_CreatePolyline.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Create (poly)line:</span><!--Do not edit span id: the Sketcher_CompLine pages redirect here-->

<div class="mw-translate-fuzzy">
* [[Image:Sketcher_CreatePolyline.png|32px]] [[Sketcher_CreatePolyline/tr|Polyline (Çok noktalı çizgi)]]: Birden çok çizgi parçasından oluşan bir çizgi çizer. Bir Polyline çizerken M tuşuna basmak, farklı polyline modları arasında geçiş yapar.
</div>
</div>


Line 180: Line 254:
<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
:* [[Image:Sketcher_Arc.png|32px]] [[Sketcher_CreateArc/tr|Yay]]: Merkez, yarıçap, başlangıç ​​açısı ve bitiş açısından bir yay parçası çizer.
:* [[Image:Sketcher_Arc.png|32px]] [[Sketcher_CreateArc/tr|Yay]]: Merkez, yarıçap, başlangıç ​​açısı ve bitiş açısından bir yay parçası çizer.
</div>
</div>


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
Line 186: Line 260:
</div>
</div>


:* [[Image:Sketcher_CreateArcOfEllipse.svg|32px]] [[Sketcher_CreateArcOfEllipse|Arc of ellipse]]: Creates an arc of ellipse.
* <span id="Sketcher_CompCreateCircle">[[Image:Sketcher_CreateCircle.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Create circle:</span><!--Do not edit span id: the Sketcher_CompCreateCircle pages redirect here-->

:* [[Image:Sketcher_CreateArcOfHyperbola.svg|32px]] [[Sketcher_CreateArcOfHyperbola|Arc of hyperbola]]: Creates an arc of hyperbola.

:* [[Image:Sketcher_CreateArcOfParabola.svg|32px]] [[Sketcher_CreateArcOfParabola|Arc of parabola]]: Creates an arc of parabola.

* <span id="Sketcher_CompCreateConic">[[Image:Sketcher_CreateCircle.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Create circle/ellipse:</span><!--Do not edit span id: the Sketcher_CompCreateConic pages redirect here-->


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
Line 196: Line 276:
</div>
</div>


:* [[Image:Sketcher_CreateEllipseByCenter.svg|32px]] [[Sketcher_CreateEllipseByCenter|Ellipse by center]]: Creates an ellipse by its center, an endpoint of one of its axes, and a point along the ellipse. {{Version|1.0}}: Or by both endpoints of one of its axes and a point along the ellipse.
* <span id="Sketcher_CompCreateConic">[[Image:Sketcher_Conics.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Create conic:</span><!--Do not edit span id: the Sketcher_CompCreateConic pages redirect here-->

:* [[Image:Sketcher_CreateEllipseByCenter.svg|32px]] [[Sketcher_CreateEllipseByCenter|Ellipse by center]]: Draws an ellipse by center point, major radius point and minor radius point.

:* [[Image:Sketcher_CreateEllipseBy3Points.svg|32px]] [[Sketcher_CreateEllipseBy3Points|Ellipse by 3 points]]: Draws an ellipse by major diameter (2 points) and minor radius point.

:* [[Image:Sketcher_CreateArcOfEllipse.svg|32px]] [[Sketcher_CreateArcOfEllipse|Arc of ellipse]]: Draws an arc of ellipse by center point, major radius point, starting point and ending point.

:* [[Image:Sketcher_CreateArcOfHyperbola.svg|32px]] [[Sketcher_CreateArcOfHyperbola|Arc of hyperbola]]: Draws an arc of hyperbola.

:* [[Image:Sketcher_CreateArcOfParabola.svg|32px]] [[Sketcher_CreateArcOfParabola|Arc of parabola]]: Draws an arc of parabola.

* <span id="Sketcher_CompCreateBSpline">[[Image:Sketcher_CreateBSpline.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] B-spline:</span><!--Do not edit span id: the Sketcher_CompCreateBSpline pages redirect here-->


:* [[Image:Sketcher_CreateEllipseBy3Points.svg|32px]] [[Sketcher_CreateEllipseBy3Points|Ellipse by 3 points]]: Creates an ellipse by the endpoints of one of its axes and a point along the ellipse. {{Version|1.0}}: This is the same tool as [[Sketcher_CreateEllipseByCenter|Ellipse by center]] but with a different initial mode.
:* [[File:Sketcher_CreateBSpline.svg|32px]] [[Sketcher_CreateBSpline|B-spline by control points]]: Draws a B-spline curve by its control points.

:* [[File:Sketcher_CreatePeriodicBSpline.svg|32px]] [[Sketcher_CreatePeriodicBSpline|Periodic B-spline by control points]]: Draws a periodic (closed) B-spline curve by its control points.

:* [[File:Sketcher_CreateBSplineByInterpolation.svg|32px]] [[Sketcher_CreateBSplineByInterpolation|B-spline by knots]]: Draws a B-spline curve by its knots. {{Version|0.21}}

:* [[File:Sketcher_CreatePeriodicBSplineByInterpolation.svg|32px]] [[Sketcher_CreatePeriodicBSplineByInterpolation|Periodic B-spline by knots]]: Draws a periodic (closed) B-spline curve by its knots. {{Version|0.21}}

<div class="mw-translate-fuzzy">
* [[Image:Sketcher_CreatePolyline.png|32px]] [[Sketcher_CreatePolyline/tr|Polyline (Çok noktalı çizgi)]]: Birden çok çizgi parçasından oluşan bir çizgi çizer. Bir Polyline çizerken M tuşuna basmak, farklı polyline modları arasında geçiş yapar.
</div>


* <span id="Sketcher_CompCreateRectangles">[[Image:Sketcher_CreateRectangle.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Create rectangle:</span><!--Do not edit span id: the Sketcher_CompCreateRectangles pages redirect here-->
* <span id="Sketcher_CompCreateRectangles">[[Image:Sketcher_CreateRectangle.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Create rectangle:</span><!--Do not edit span id: the Sketcher_CompCreateRectangles pages redirect here-->
Line 228: Line 286:
</div>
</div>


:* [[Image:Sketcher_CreateRectangle_Center.svg|32px]] [[Sketcher_CreateRectangle_Center|Centered rectangle]]: Draws a rectangle from a central point and an edge point. {{Version|0.20}}
:* [[Image:Sketcher_CreateRectangle_Center.svg|32px]] [[Sketcher_CreateRectangle_Center|Centered rectangle]]: Creates a centered rectangle. {{Version|1.0}}: This is the same tool as [[Sketcher_CreateRectangle|Rectangle]] but with a different initial mode.


:* [[Image:Sketcher_CreateOblong.svg|32px]] [[Sketcher_CreateOblong|Rounded rectangle]]: Draws a rounded rectangle from 2 opposite points. {{Version|0.20}}
:* [[Image:Sketcher_CreateOblong.svg|32px]] [[Sketcher_CreateOblong|Rounded rectangle]]: Creates a rounded rectangle. Idem.


* <span id="Sketcher_CompCreateRegularPolygon">[[Image:Sketcher_CreateHexagon.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Create regular polygon:</span><!--Do not edit span id: the Sketcher_CompCreateRegularPolygon pages redirect here-->
* <span id="Sketcher_CompCreateRegularPolygon">[[Image:Sketcher_CreateHexagon.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Create regular polygon:</span><!--Do not edit span id: the Sketcher_CompCreateRegularPolygon pages redirect here-->
Line 258: Line 316:
</div>
</div>


:* [[Image:Sketcher_CreateRegularPolygon.svg|32px]] [[Sketcher_CreateRegularPolygon|Regular polygon]] : Draws a regular polygon by selecting the number of sides and picking two points: the center and one corner.
:* [[Image:Sketcher_CreateRegularPolygon.svg|32px]] [[Sketcher_CreateRegularPolygon|Regular polygon]]: Creates a regular polygon. The number of sides can be specified.


* <span id="Sketcher_CompSlot">[[Image:Sketcher_CreateSlot.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Create slot:</span><!--Do not edit span id: the Sketcher_CompSlot pages redirect here-->
* <span id="Sketcher_CompSlot">[[Image:Sketcher_CreateSlot.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Create slot:</span><!--Do not edit span id: the Sketcher_CompSlot pages redirect here-->
Line 266: Line 324:
</div>
</div>


:* [[Image:Sketcher_CreateArcSlot.svg|32px]] [[Sketcher_CreateArcSlot|Arc slot]]: TBD. {{Version|0.22}}
:* [[Image:Sketcher_CreateArcSlot.svg|32px]] [[Sketcher_CreateArcSlot|Arc slot]]: Creates an arc slot. {{Version|1.0}}


* <span id="Sketcher_CompCreateFillets">[[Image:Sketcher_CreateFillet.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Create fillet:</span><!--Do not edit span id: the Sketcher_CompCreateFillets pages redirect here-->
* <span id="Sketcher_CompCreateBSpline">[[Image:Sketcher_CreateBSpline.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Create B-spline:</span><!--Do not edit span id: the Sketcher_CompCreateBSpline pages redirect here-->

:* [[File:Sketcher_CreateBSpline.svg|32px]] [[Sketcher_CreateBSpline|B-spline by control points]]: Creates a B-spline curve from control points.

:* [[File:Sketcher_CreatePeriodicBSpline.svg|32px]] [[Sketcher_CreatePeriodicBSpline|Periodic B-spline by control points]]: Creates a periodic (closed) B-spline curve from control points.

:* [[File:Sketcher_CreateBSplineByInterpolation.svg|32px]] [[Sketcher_CreateBSplineByInterpolation|B-spline by knots]]: Creates a B-spline curve through knot points. {{Version|0.21}}

:* [[File:Sketcher_CreatePeriodicBSplineByInterpolation.svg|32px]] [[Sketcher_CreatePeriodicBSplineByInterpolation|Periodic B-spline by knots]]: Creates a periodic (closed) B-spline curve through knot points. {{Version|0.21}}


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
* [[Image:Sketcher_ToggleConstruction.png|32px]] [[Sketcher_ToggleConstruction/tr|İnşaat modu]]: Eskiz geometrisini inşaat moduna değiştirir. İnşaat geometrisi mavi renkte gösterilir ve Eskiz düzenleme modunun dışına atılır.
* [[Image:Sketcher_CreateFillet.png|32px]] [[Sketcher_CreateFillet/tr|Kavis]]:Bir noktada birleştirilmiş iki çizgi arasında bir kavis yapar. Her iki çizgiyi de seçin veya köşe noktasına tıklayın, ardından aracı etkinleştirin.
</div>
</div>


<span id="Sketcher_constraints"></span>
:* [[Image:Sketcher_CreatePointFillet.svg|32px]] [[Sketcher_CreatePointFillet|Corner-preserving fillet]]: Creates a fillet between two non-parallel lines while preserving their (virtual) intersection.
=== Eskiz kısıtlamaları===

* <span id="Sketcher_CompCurveEdition">[[Image:Sketcher_Trimming.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Edit edge:</span><!--Do not edit span id: the Sketcher_CompCurveEdition pages redirect here-->


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
Kısıtlamalar, uzunlukları tanımlamak, Eskiz öğeleri arasında kuralları belirlemek ve eskizleri dikey ve yatay eksenler boyunca kilitlemek için kullanılır. Bazı kısıtlamalar, [[Sketcher_helper_constraint|Yardımcı kısıtlamaların]] kullanılmasını gerektirir .
* [[Image:Sketcher_Trimming.png|32px]] [[Sketcher_Trimming/tr|Kırpma]]: Tıklanan noktaya göre bir çizgi, daire veya yay kırpar.
</div>
</div>


* <span id="Sketcher_CompDimensionTools">[[Image:Sketcher_Dimension.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Dimensional constraints:</span><!--Do not edit span id: the Sketcher_CompDimensionTools pages redirect here-->
:* [[Image:Sketcher_Split.svg|32px]] [[Sketcher_Split|Split]]: Splits an edge into two while keeping most of the constraints. {{Version|0.20}}

:* [[File:Sketcher_Dimension.svg|32px]] [[Sketcher_Dimension|Dimension]]: Is the context-sensitive constraint tool of the Sketcher Workbench. Based on the current selection, it offers appropriate dimensional constraints, but also geometric constraints. {{Version|1.0}}


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
* [[Image:Constraint_HorizontalDistance.png‎|32px]] [[Sketcher ConstrainDistanceX/tr|Yatay uzunluk]]:İki nokta veya çizgi bitiş noktaları arasındaki yatay mesafeyi sabitler. Yalnızca bir öğe seçilirse, mesafe orijine ayarlanır.
* [[File:Sketcher_Extend.svg|32px]] [[Sketcher_Extend/tr|Genişlet]]: Bir çizgiyi veya bir yayı bir sınır çizgisine, yay, elips, elips yayına veya uzayda bir noktaya genişletir.{{Version|0.17}}
</div>
</div>


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
* [[Image:Constraint_VerticalDistance.png|32px]] [[Sketcher_ConstrainDistanceY/tr|Dikey uzunluk]]: 2 nokta veya çizgi bitiş noktası arasındaki dikey uzunluğu sabitler. Yalnızca bir öğe seçilirse, uzunluk orijine ayarlanır.
* [[Image:Sketcher_External.png|32px]] [[Sketcher_External/tr|Dış geometri]]: Dış geometriye bağlı bir kenar oluşturur.
</div>
</div>


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
* [[Image:Constraint_Length.png|32px]] [[Sketcher_ConstrainDistance|Uzunluk]]: Seçili çizginin uzunluğunu sınırlayarak mesafeyi tanımlar veya aralarındaki uzunluğu sınırlayarak iki nokta arasını tanımlar.
* [[File:Sketcher_CarbonCopy.svg|32px]] [[Sketcher_CarbonCopy/tr|Karbon kopya]]:Başka bir çizimin geometrisini kopyalar.{{Version|0.17}}
</div>
</div>

:* <span id="Sketcher_CompConstrainRadDia">[[File:Sketcher_ConstrainRadiam.svg|32px]] [[Sketcher_ConstrainRadiam|Auto radius/diameter]]: Fixes the radius of arcs and B-spline weight circles, and the diameter of circles.</span><!--Do not edit span id: the Sketcher_CompConstrainRadDia pages redirect here-->


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
* [[Image:Constraint_Radius.png|32px]] [[Sketcher_ConstrainRadius/tr|Yarıçap]]:Yarıçapı kısıtlayarak, seçilen bir yayın veya dairenin yarıçapını tanımlar.
* [[Image:Sketcher_ToggleConstruction.png|32px]] [[Sketcher_ToggleConstruction/tr|İnşaat modu]]: Eskiz geometrisini inşaat moduna değiştirir. İnşaat geometrisi mavi renkte gösterilir ve Eskiz düzenleme modunun dışına atılır.
* [[Image:Constraint_InternalAngle.png|32px]] [[Sketcher_ConstrainAngle/tr|İç Açı]]:Seçilen iki çizgi arasındaki iç açıyı tanımlar.
</div>
</div>


:* [[File:Sketcher_ConstrainDiameter.svg|32px]] [[Sketcher_ConstrainDiameter|Diameter]]: Fixes the diameter of circles and arcs.
<span id="Sketcher_constraints"></span>
=== Eskiz kısıtlamaları===


:* [[File:Sketcher_ConstrainAngle.svg|32px]] [[Sketcher_ConstrainAngle|Angle]]: Fixes the angle between two edges, the angle of a line with the horizontal axis of the sketch, or the aperture angle of a circular arc.
Kısıtlamalar, uzunlukları tanımlamak, Eskiz öğeleri arasında kuralları belirlemek ve eskizleri dikey ve yatay eksenler boyunca kilitlemek için kullanılır. Bazı kısıtlamalar, [[Sketcher_helper_constraint|Yardımcı kısıtlamaların]] kullanılmasını gerektirir .

<div class="mw-translate-fuzzy">
* [[Image:Sketcher_ConstrainLock.png‎|32px]] [[Sketcher ConstrainLock|Kilit]]: Seçili öğeyi, kökene göre dikey ve yatay mesafeler ayarlayarak sınırlar ve böylece o öğenin konumunu kilitler. Bu kısıtlama mesafeleri daha sonra düzenlenebilir.
</div>

* [[File:Sketcher_ConstrainCoincidentUnified.svg|32px]] [[Sketcher_ConstrainCoincidentUnified|Coincident (unified)]]: Creates a coincident constraint between points, fixes points on edges or axes, or creates a concentric constraint. It combines the [[Sketcher_ConstrainCoincident|Coincident]] and [[Sketcher_ConstrainPointOnObject|Point on object]] tools. {{Version|1.0}}


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
Line 313: Line 388:
</div>
</div>


* <span id="Sketcher_CompHorVer">[[Image:Sketcher_ConstrainHorVer.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Constrain horizontally or vertically:</span><!--Do not edit span id: the Sketcher_CompHorVer pages redirect here-->
* <span id="Sketcher_CompHorVer">[[Image:Sketcher_ConstrainHorVer.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]]Horizontal/vertical constraints:</span><!--Do not edit span id: the Sketcher_CompHorVer pages redirect here-->


:* [[File:Sketcher_ConstrainHorVer.svg|32px]] [[Sketcher_ConstrainHorVer|Horizontal/Vertical]]: TBD. {{Version|0.22}}
:* [[File:Sketcher_ConstrainHorVer.svg|32px]] [[Sketcher_ConstrainHorVer|Horizontal/vertical]]: Constrains lines or pairs of points to be horizontal or vertical, whichever is closest to the current alignment. It combines the [[Sketcher_ConstrainHorizontal|Horizontal]] and [[Sketcher_ConstrainVertical|Vertical]] tools. {{Version|1.0}}


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
Line 348: Line 423:
* [[Image:Sketcher_ConstrainBlock.png|32px]] [[Sketcher_ConstrainBlock|Kısıtlama bloğu]]: Temel olarak, tek bir kısıtlama ile yerinde bir geometrik elemanın bloklanmasını sağlar.
* [[Image:Sketcher_ConstrainBlock.png|32px]] [[Sketcher_ConstrainBlock|Kısıtlama bloğu]]: Temel olarak, tek bir kısıtlama ile yerinde bir geometrik elemanın bloklanmasını sağlar.
</div>
</div>

* <span id="Sketcher_CompDimensionTools">[[Image:Sketcher_Dimension.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Dimensional constraints:</span><!--Do not edit span id: the Sketcher_CompDimensionTools pages redirect here-->

:* [[File:Sketcher_Dimension.svg|32px]] [[Sketcher_Dimension|Dimension]]: TBD. {{Version|0.22}}

<div class="mw-translate-fuzzy">
* [[Image:Sketcher_ConstrainLock.png‎|32px]] [[Sketcher ConstrainLock|Kilit]]: Seçili öğeyi, kökene göre dikey ve yatay mesafeler ayarlayarak sınırlar ve böylece o öğenin konumunu kilitler. Bu kısıtlama mesafeleri daha sonra düzenlenebilir.
</div>

<div class="mw-translate-fuzzy">
* [[Image:Constraint_HorizontalDistance.png‎|32px]] [[Sketcher ConstrainDistanceX/tr|Yatay uzunluk]]:İki nokta veya çizgi bitiş noktaları arasındaki yatay mesafeyi sabitler. Yalnızca bir öğe seçilirse, mesafe orijine ayarlanır.
</div>

<div class="mw-translate-fuzzy">
* [[Image:Constraint_VerticalDistance.png|32px]] [[Sketcher_ConstrainDistanceY/tr|Dikey uzunluk]]: 2 nokta veya çizgi bitiş noktası arasındaki dikey uzunluğu sabitler. Yalnızca bir öğe seçilirse, uzunluk orijine ayarlanır.
</div>

<div class="mw-translate-fuzzy">
* [[Image:Constraint_Length.png|32px]] [[Sketcher_ConstrainDistance|Uzunluk]]: Seçili çizginin uzunluğunu sınırlayarak mesafeyi tanımlar veya aralarındaki uzunluğu sınırlayarak iki nokta arasını tanımlar.
</div>

<div class="mw-translate-fuzzy">
* [[Image:Constraint_Radius.png|32px]] [[Sketcher_ConstrainRadius/tr|Yarıçap]]:Yarıçapı kısıtlayarak, seçilen bir yayın veya dairenin yarıçapını tanımlar.
* [[Image:Constraint_InternalAngle.png|32px]] [[Sketcher_ConstrainAngle/tr|İç Açı]]:Seçilen iki çizgi arasındaki iç açıyı tanımlar.
</div>

:* [[File:Sketcher_ConstrainDiameter.svg|32px]] [[Sketcher_ConstrainDiameter|Diameter]]: Defines the diameter of an arc or circle.

:* [[File:Sketcher_ConstrainRadiam.svg|32px]] [[Sketcher_ConstrainRadiam|Auto radius/diameter]]: Defines the radius of an arc, the diameter of a circle or the weight of a B-spline pole. {{Version|0.20}}

:* [[File:Sketcher_ConstrainAngle.svg|32px]] [[Sketcher_ConstrainAngle|Angle]]: Defines the internal angle between two selected lines.

==== Special constraints ====


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
Line 386: Line 428:
</div>
</div>


* <span id="Sketcher_CompToggleConstraints">[[Image:Sketcher_ToggleDrivingConstraint.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Toggle constraints:</span><!--Do not edit span id: the Sketcher_CompToggleConstraints pages redirect here-->
==== Constraint tools ====

The following tools can be used the change the effect of constraints:


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
Line 394: Line 434:
</div>
</div>


* [[File:Sketcher_ToggleActiveConstraint.svg|32px]] [[Sketcher_ToggleActiveConstraint|Activate/deactivate constraint]]: Enable or disable an already placed constraint.
:* [[File:Sketcher_ToggleActiveConstraint.svg|32px]] [[Sketcher_ToggleActiveConstraint|Activate/deactivate constraint]]: Activates or deactivates selected constraints.


<span id="Sketcher_tools"></span>
<span id="Sketcher_tools"></span>
===Eskiz araçları===
===Eskiz araçları===


* <span id="Sketcher_CompCreateFillets">[[Image:Sketcher_CreateFillet.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Create fillet/chamfer:</span><!--Do not edit span id: the Sketcher_CompCreateFillets pages redirect here-->
<div class="mw-translate-fuzzy">
* [[File:Sketcher SelectElementsWithDoFs.svg|32px]] [[Sketcher_SelectElementsWithDoFs/tr|DOF çözücü seç]]: Yeşil renkte geometriyi serbestlik dereceli (DOF), yani tamamen kısıtlanmayan şekilde vurgular.{{Version|0.18}}
</div>


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
* [[Image:Sketcher_CreateFillet.png|32px]] [[Sketcher_CreateFillet/tr|Kavis]]:Bir noktada birleştirilmiş iki çizgi arasında bir kavis yapar. Her iki çizgiyi de seçin veya köşe noktasına tıklayın, ardından aracı etkinleştirin.
* [[Image:Sketcher SelectConstraints.png‎|32px]] [[Sketcher SelectConstraints/tr|Kısıtlamaları seç]]: Eskiz elemanının kısıtlamalarını seçer. {{Version|0.15}}
</div>
</div>

:* [[Image:Sketcher_CreateChamfer.svg|32px]] [[Sketcher_CreateChamfer|Chamfer]]: creates a chamfer between two non-parallel edges. This is the same tool as [[Sketcher_CreateFillet|Fillet]] but with a different initial mode. {{Version|1.0}}

* <span id="Sketcher_CompCurveEdition">[[Image:Sketcher_Trimming.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Edit edge:</span><!--Do not edit span id: the Sketcher_CompCurveEdition pages redirect here-->


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
* [[Image:Sketcher_Trimming.png|32px]] [[Sketcher_Trimming/tr|Kırpma]]: Tıklanan noktaya göre bir çizgi, daire veya yay kırpar.
* [[Image:Sketcher SelectElementsAssociatedWithConstraints.png‎|32px]] [[Sketcher SelectElementsAssociatedWithConstraints/tr|Kısıtlanmış öğeleri seç]]: Eskizin kısıtlanmış öğelerini seçer.{{Version|0.15}}
</div>
</div>

:* [[Image:Sketcher_Split.svg|32px]] [[Sketcher_Split|Split]]: Splits an edge while transferring most constraints.


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
* [[File:Sketcher_Extend.svg|32px]] [[Sketcher_Extend/tr|Genişlet]]: Bir çizgiyi veya bir yayı bir sınır çizgisine, yay, elips, elips yayına veya uzayda bir noktaya genişletir.{{Version|0.17}}
* [[Image:Sketcher SelectRedundantConstraints.png‎|32px]] [[Sketcher SelectRedundantConstraints/tr|Gereksiz kısıtlamaları seç]]: Eskizin gereksiz kısıtlamalarını seçer. {{Version|0.15}}
</div>
</div>


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
* [[Image:Sketcher_External.png|32px]] [[Sketcher_External/tr|Dış geometri]]: Dış geometriye bağlı bir kenar oluşturur.
* [[Image:Sketcher SelectConflictingConstraints.png‎|32px]] [[Sketcher SelectConflictingConstraints/tr|Uyumsuz Kısıtlamaları seç]]: Eskizin birbiriyle tutarsız olan kısıtlamalarını seçer.{{Version|0.15}}
</div>
</div>


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
* [[File:Sketcher_CarbonCopy.svg|32px]] [[Sketcher_CarbonCopy/tr|Karbon kopya]]:Başka bir çizimin geometrisini kopyalar.{{Version|0.17}}
* [[File:Sketcher_Element_Ellipse_All.png‎|32px]] [[Sketcher_RestoreInternalAlignmentGeometry/tr|İç geometriyi göster/gizle]]:Seçilmiş bir elipsin, elips yayının/hiperbol/parabol veya B-spline'ın gereksiz iç geometrisini kaybeder/siler.
</div>
</div>


Line 435: Line 479:
</div>
</div>


* [[File:Sketcher_Offset.svg|32px]] [[Sketcher_Offset|Offset geometry]]: Adds an equidistant outline around selected edges. {{Version|0.22}}
* [[File:Sketcher_Translate.svg|32px]] [[Sketcher_Translate|Array transform]]: Moves or optionally creates copies of selected elements. {{Version|1.0}}


* [[File:Sketcher_Rotate.svg|32px]] [[Sketcher_Rotate|Polar transform]]: TBD. {{Version|0.22}}
* [[File:Sketcher_Rotate.svg|32px]] [[Sketcher_Rotate|Polar transform]]: Rotates or optionally creates rotated copies of selected elements. {{Version|1.0}}


* [[File:Sketcher_Scale.svg|32px]] [[Sketcher_Scale|Scale transform]]: Scales or optionally creates scaled copies of selected elements. {{Version|1.0}}
<div class="mw-translate-fuzzy">
* [[Image:Sketcher Symmetry.png‎|32px]] [[Sketcher Symmetry/tr|Simetri]]: Seçilen bir çizgiye simetrik bir eskiz elemanı kopyalar. {{Version|0.16}}
</div>


* [[File:Sketcher_Offset.svg|32px]] [[Sketcher_Offset|Offset geometry]]: Creates equidistant edges around selected edges. {{Version|1.0}}
<div class="mw-translate-fuzzy">
* [[Image:Sketcher Clone.png‎|32px]] [[Sketcher Clone/tr|Klon]]: Eskiz elemanını klonlar.{{Version|0.16}}
</div>


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
* [[Image:Sketcher Copy.png‎|32px]] [[Sketcher Copy/tr|Kopyala]]: Eskiz öğesini kopyalar.{{Version|0.16}}
* [[Image:Sketcher Symmetry.png‎|32px]] [[Sketcher Symmetry/tr|Simetri]]: Seçilen bir çizgiye simetrik bir eskiz elemanı kopyalar. {{Version|0.16}}
</div>

<div class="mw-translate-fuzzy">
* [[File:Sketcher_Move.svg|32px]] [[Sketcher_Move/tr|Taşı]]: Seçilen geometriyi, seçilen son noktayı referans alarak hareket ettirir.
</div>

<div class="mw-translate-fuzzy">
* [[Image:Sketcher RectangularArray.png‎|32px]] [[Sketcher RectangularArray/tr|Dikdörtgen dizi]]: Seçili eskiz öğelerinin dizisini oluşturur.{{Version|0.16}}
</div>
</div>


* [[File:Sketcher_RemoveAxesAlignment.svg|32px]] [[Sketcher_RemoveAxesAlignment|Remove axes alignment]]: Remove axes alignment while trying to preserve the constraint relationship of the selection. {{Version|0.20}}
* [[File:Sketcher_RemoveAxesAlignment.svg|32px]] [[Sketcher_RemoveAxesAlignment|Remove axes alignment]]: Removes the axes alignment of selected edges by replacing [[Sketcher_ConstrainHorizontal|Horizontal]] and [[Sketcher_ConstrainVertical|Vertical]] constraints with [[Sketcher_ConstrainParallel|Parallel]] and [[Sketcher_ConstrainPerpendicular|Perpendicular]] constraints.


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
Line 468: Line 500:
* [[File:Sketcher Element SelectionTypeInvalid.svg|32px]] [[Sketcher_DeleteAllConstraints|Tüm kısıtlamaları sil]]:Tüm kısıtlamaları çizimden siler. {{Version|0.18}}
* [[File:Sketcher Element SelectionTypeInvalid.svg|32px]] [[Sketcher_DeleteAllConstraints|Tüm kısıtlamaları sil]]:Tüm kısıtlamaları çizimden siler. {{Version|0.18}}
</div>
</div>

* <span id="Sketcher_CopyClipboard">[[File:Edit-copy.svg|32px]] Copy in Sketcher: See [[#Copy,_cut_and_paste|Copy, cut and paste]].</span><!--Do not edit span id: the Sketcher_CopyClipboard pages redirect here-->

* <span id="Sketcher_Cut">[[File:Edit-cut.svg|32px]] Cut in Sketcher: See [[#Copy,_cut_and_paste|Copy, cut and paste]].</span><!--Do not edit span id: the Sketcher_Cut pages redirect here-->

* <span id="Sketcher_Paste">[[File:Edit-paste.svg|32px]] Paste in Sketcher: See [[#Copy,_cut_and_paste|Copy, cut and paste]].</span><!--Do not edit span id: the Sketcher_Paste pages redirect here-->


<span id="Sketcher_B-spline_tools"></span>
<span id="Sketcher_B-spline_tools"></span>
Line 480: Line 518:
</div>
</div>


* [[File:Sketcher_BSplineDecreaseDegree.svg|32px]] [[Sketcher_BSplineDecreaseDegree|Decrease B-spline degree]]: Decreases the degree (order) of a B-spline.
* [[File:Sketcher_BSplineDecreaseDegree.svg|32px]] [[Sketcher_BSplineDecreaseDegree|Decrease B-spline degree]]: Decreases the degree (order) of B-splines.


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
Line 490: Line 528:
</div>
</div>


* [[File:Sketcher_BSplineInsertKnot.svg|32px]] [[Sketcher_BSplineInsertKnot|Insert knot]]: Inserts a knot into an existing B-spline. {{Version|0.20}}
* [[File:Sketcher_BSplineInsertKnot.svg|32px]] [[Sketcher_BSplineInsertKnot|Insert knot]]: Inserts a knot into a B-spline or increases the multiplicity of an existing knot.


* [[File:Sketcher_JoinCurves.svg|32px]] [[Sketcher_JoinCurves|Join curves]]: Joins two curves at selected end points. {{Version|0.21}}
* [[File:Sketcher_JoinCurves.svg|32px]] [[Sketcher_JoinCurves|Join curves]]: Creates a B-spline by joining two existing B-splines or other edges. {{Version|0.21}}


===Sketcher visual===
===Sketcher visual===


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
* [[File:Sketcher SelectElementsWithDoFs.svg|32px]] [[Sketcher_SelectElementsWithDoFs/tr|DOF çözücü seç]]: Yeşil renkte geometriyi serbestlik dereceli (DOF), yani tamamen kısıtlanmayan şekilde vurgular.{{Version|0.18}}
* [[Image:Sketcher SwitchVirtualSpace.png‎|32px]] [[Sketcher_SwitchVirtualSpace/tr|Sanal alana geç]]: Kısıtlamaları '''gizlemenizi''' ve onları tekrar görünür hale getirmenizi sağlar.{{Version|0.17}} https://forum.freecadweb.org/viewtopic.php?f=9&t=26614 bakınız.
</div>
</div>

<div class="mw-translate-fuzzy">
* [[Image:Sketcher SelectConstraints.png‎|32px]] [[Sketcher SelectConstraints/tr|Kısıtlamaları seç]]: Eskiz elemanının kısıtlamalarını seçer. {{Version|0.15}}
</div>

<div class="mw-translate-fuzzy">
* [[Image:Sketcher SelectElementsAssociatedWithConstraints.png‎|32px]] [[Sketcher SelectElementsAssociatedWithConstraints/tr|Kısıtlanmış öğeleri seç]]: Eskizin kısıtlanmış öğelerini seçer.{{Version|0.15}}
</div>

<div class="mw-translate-fuzzy">
* [[Image:Sketcher SelectRedundantConstraints.png‎|32px]] [[Sketcher SelectRedundantConstraints/tr|Gereksiz kısıtlamaları seç]]: Eskizin gereksiz kısıtlamalarını seçer. {{Version|0.15}}
</div>

<div class="mw-translate-fuzzy">
* [[Image:Sketcher SelectConflictingConstraints.png‎|32px]] [[Sketcher SelectConflictingConstraints/tr|Uyumsuz Kısıtlamaları seç]]: Eskizin birbiriyle tutarsız olan kısıtlamalarını seçer.{{Version|0.15}}
</div>

* [[File:Sketcher_ArcOverlay.svg|32px]] [[Sketcher_ArcOverlay|Show/hide circular helper for arcs]]: Shows or hides the circular helpers (underlying virtual circles) for arcs in all sketches. {{Version|1.0}}

* <span id="Sketcher_CompBSplineShowHideGeometryInformation">[[Image:Sketcher_BSplinePolygon.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Show/hide B-spline information layer:</span><!--Do not edit span id: the Sketcher_CompBSplineShowHideGeometryInformation pages redirect here-->


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
Line 516: Line 574:
</div>
</div>


* [[File:Sketcher_BSplinePoleWeight.svg|32px]] [[Sketcher_BSplinePoleWeight|Show/hide B-spline control point weight]]: Shows or hides the display of the weights for the control points of a B-spline.
:* [[File:Sketcher_BSplinePoleWeight.svg|32px]] [[Sketcher_BSplinePoleWeight|Show/hide B-spline control point weight]]: Shows or hides the B-spline control point weight in all sketches.


<div class="mw-translate-fuzzy">
* [[File:Sketcher_ArcOverlay.svg|32px]] [[Sketcher_ArcOverlay|Show/hide circular helper for arcs]]: TBD. {{Version|0.22}}
* [[File:Sketcher_Element_Ellipse_All.png‎|32px]] [[Sketcher_RestoreInternalAlignmentGeometry/tr|İç geometriyi göster/gizle]]:Seçilmiş bir elipsin, elips yayının/hiperbol/parabol veya B-spline'ın gereksiz iç geometrisini kaybeder/siler.
</div>

<div class="mw-translate-fuzzy">
* [[Image:Sketcher SwitchVirtualSpace.png‎|32px]] [[Sketcher_SwitchVirtualSpace/tr|Sanal alana geç]]: Kısıtlamaları '''gizlemenizi''' ve onları tekrar görünür hale getirmenizi sağlar.{{Version|0.17}} https://forum.freecadweb.org/viewtopic.php?f=9&t=26614 bakınız.
</div>


===Obsolete tools===
===Obsolete tools===

<div class="mw-translate-fuzzy">
* [[Image:Sketcher Clone.png‎|32px]] [[Sketcher Clone/tr|Klon]]: Eskiz elemanını klonlar.{{Version|0.16}}
</div>


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
* [[Image:Sketcher CloseShape.png‎|32px]] [[Sketcher CloseShape/tr|CŞekli kapat]]: Bitiş noktalarını çakıştırarak kısıtlanmış kapalı bir şekil oluşturur. {{Version|0.15}}
* [[Image:Sketcher CloseShape.png‎|32px]] [[Sketcher CloseShape/tr|CŞekli kapat]]: Bitiş noktalarını çakıştırarak kısıtlanmış kapalı bir şekil oluşturur. {{Version|0.15}}
</div>
</div>

* [[File:Sketcher_CreatePointFillet.svg|32px]] [[Sketcher_CreatePointFillet|Corner-preserving fillet]]: Creates a fillet between two non-parallel lines while preserving their corner point. Not available in {{VersionPlus|1.0}}.


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
* [[Image:Sketcher ConnectLines.png‎|32px]] [[Sketcher ConnectLines/tr|
* [[Image:Sketcher ConnectLines.png‎|32px]] [[Sketcher ConnectLines/tr|
Kenarları Bağla]]: Uç noktalarını çakıştırarak eskiz elemanlarını bağlar.{{Version|0.15}}
Kenarları Bağla]]: Uç noktalarını çakıştırarak eskiz elemanlarını bağlar.{{Version|0.15}}
</div>

<div class="mw-translate-fuzzy">
* [[Image:Sketcher Copy.png‎|32px]] [[Sketcher Copy/tr|Kopyala]]: Eskiz öğesini kopyalar.{{Version|0.16}}
</div>

<div class="mw-translate-fuzzy">
* [[File:Sketcher_Move.svg|32px]] [[Sketcher_Move/tr|Taşı]]: Seçilen geometriyi, seçilen son noktayı referans alarak hareket ettirir.
</div>

<div class="mw-translate-fuzzy">
* [[Image:Sketcher RectangularArray.png‎|32px]] [[Sketcher RectangularArray/tr|Dikdörtgen dizi]]: Seçili eskiz öğelerinin dizisini oluşturur.{{Version|0.16}}
</div>
</div>


Line 540: Line 622:
</div>
</div>


== Best Practices ==
== Best practices ==


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
Line 562: Line 644:
</div>
</div>


* [https://forum.freecadweb.org/viewtopic.php?f=36&t=30104 Sketcher tutorial] by chrisb. This is a 70-page long PDF document that serves as a detailed manual for the sketcher. It explains the basics of Sketcher usage, and goes into a lot of detail about the creation of geometrical shapes, and each of the constraints.
* [https://forum.freecadweb.org/viewtopic.php?f=36&t=30104 Sketcher Lecture] by chrisb. This is a more than 80 page PDF document that serves as a detailed manual for the Sketcher. It explains the basics of Sketcher usage, and goes into a lot of detail about the creation of geometrical shapes, and each of the constraints.
* [[Basic_Sketcher_Tutorial|Basic Sketcher Tutorial]] for beginners
* [[Basic_Sketcher_Tutorial|Basic Sketcher Tutorial]] for beginners
* [[Sketcher_Micro_Tutorial_-_Constraint_Practices|Sketcher Micro Tutorial - Constraint Practices]]
* [[Sketcher_Micro_Tutorial_-_Constraint_Practices|Sketcher Micro Tutorial - Constraint Practices]]

Latest revision as of 11:07, 7 May 2024

This page has been marked for translation. But it is still a work in progress!!!
Sketcher workbench icon

Giriş

Eskiz tezgahı; Parça tasarım tezgahı, Yapı tezgahı ve diğer tezgahlarda kullanılmak üzere 2D geometriler üretir. Genel olarak, bir 2D geometrisi çoğu CAD modelinin başlangıç ​​noktası olarak kabul edilir, çünkü bir 2D çizimi, 3D şekli oluşturmak için "ekstrüzyona sokulabilir"; Önceden oluşturulmuş 3D şekillerin üstünde oyuklar, çıkıntılar veya ekstrüzyonlar gibi başka özellikler oluşturmak için başka 2D çizimler de kullanılabilir. Parça Tezgahında tanımlanan katılarda, Boolean işlemleri ile birlikte Eskiz, üretken katı şekilli tasarımın çekirdeğini oluşturur.

Together with boolean operations defined in the Part Workbench, the Sketcher Workbench, or "The Sketcher" for short, forms the basis of the constructive solid geometry (CSG) method of building solids. Together with PartDesign Workbench operations, it also forms the basis of the feature editing methodology of creating solids. But many other workbenches use sketches as well.

Eskiz tezgahı, 2D şekillerin kesin geometrik tanımları izlemesine izin veren "kısıtlamalara" sahiptir. Bir kısıtlayıcı çözücü, 2D geometrinin kısıtlı boyutunu hesaplar ve çizim serbestlik derecelerinin etkileşimli olarak araştırılmasını sağlar.

Eskiz nerelerde kullanılmaz

Eskiz, 2D planlar üretmek için tasarlanmamıştır. Eskizler, katı bir özellik oluşturmak için kullanıldığında, otomatik olarak gizlenir. Kısıtlamalar yalnızca Eskiz düzenleme modunda görülebilir.

Tamamen kısıtlanmış bir eskiz

Constraints

Kısıtlama nedir

Boyutlar yerine, kısıtlamalar bir nesnenin serbestlik derecesini sınırlamak için kullanılır. Örneğin, kısıtlamaları olmayan bir çizgi 4 Serbestlik Derecesine (" DOF " olarak kısaltılır) sahiptir: yatay ya da dikey olarak hareket ettirilebilir, uzatılabilir ve döndürülebilir.

Yatay veya dikey bir sınırlama veya bir açı sınırlaması (başka bir çizgiye veya eksenlerden birine göre) uygulamak, dönme kapasitesini sınırlar ve böylece 3 serbestlik derecesine sahip olur. Çizginin herhangi bir noktasını, Orijin ile ilişkilendirmek 2 serbestlik derecesini ortadan kaldırır. Bir boyut sınırlaması uygulamak son serbestlik derecesini ortadan kaldıracaktır. Çizgi daha sonra tamamen kısıtlı olarak kabul edilir .

Birden fazla nesne aralarında sınırlandırılabilir. İki çizgi, noktaları birbiriyle çakışan nokta kısıtı ile birleştirilebilir. Aralarında bir açı belirlenebilir veya dik olarak ayarlanabilir. Bir çizgi, bir yay veya bir daireye teğet olabilir vb. Birden fazla nesneyi içeren karmaşık bir Eskiz, çok sayıda farklı çözüme sahip olacak ve tamamen kısıtlı olması, bu olası çözümlerden yalnızca birinin uygulanan kısıtlamalara dayanarak ulaşıldığı anlamına gelir.

İki tür kısıtlama vardır: geometrik ve boyutsal. Bunlar aşağıdaki 'Araçlar' bölümünde ayrıntılı olarak açıklanmaktadır .

Edit constraints

When a driving dimensional constraint is created, and if the Ask for value after creating a dimensional constraint preference is selected (default), a dialog opens to edit its value.

Sketcher_Edit_Constraint.png

You can enter a numerical value or an expression, and it is possible to name the constraint to facilitate its use in other expressions. You can also check the Reference checkbox to switch the constrain to reference mode.

To edit the value of an existing dimensional constraint do one of the following:

  • Double-click the constraint value in the 3D view.
  • Double-click the constraint in the Sketcher Dialog.
  • Right-click the constraint in the Sketcher Dialog and select the Change value option from the context menu.

Reposition constraints

Dimensional constraints can be repositioned in the 3D view by dragging. Hold down the left mouse button over the constraint value and move the mouse. The symbols of geometric constraints are positioned automatically and cannot be moved.

Profile sketches

To create a sketch that can be used as a profile for generating solids certain rules must be followed:

  • The sketch must contain only closed contours. Gaps between endpoints, however small, are not allowed.
  • Contours can be nested, to create voids, but should not self-intersect or intersect other contours.
  • Contours cannot share edges with other contours. Duplicate edges must be avoided.
  • T-connections, that is more than two edges sharing a common point, or a point touching an edge, are not allowed.

These rules do not apply to construction geometry (default color blue), which is not shown outside edit mode, or if the sketch is used for a different purpose. Depending on the workbench and the tool that will use the profile sketch, additional restrictions may apply.

Drawing aids

The Sketcher Workbench has several drawing aids and other features that can help when creating geometry and applying constraints.

Continue modes

There are two continue modes: Geometry creation "Continue Mode" and Constraint creation "Continue Mode". If these are checked (default) in the preferences, related tools will restart after finishing. To exit an continuous tool press Esc or the right mouse button. This must be repeated if a continuous geometry tool has already received input. You can also exit a continuous tool by starting another geometry or constraint creation tool. Note that pressing Esc if no tool is active will exit sketch edit mode. Uncheck the Esc can leave sketch edit mode preference if you often inadvertently press Esc too many times.

Auto constraints

In sketches that have Auto constraints checked (default) several constraints are applied automatically. The icon of a proposed automatic constraint is shown next to the cursor when it is placed correctly. Left-Clicking will then apply that constraint. This is a per-sketch setting that can be changed in the Sketcher Dialog or by changing the GörünümAutoconstraints property of the sketch.

The following constraints are applied automatically:

Snapping

introduced in version 0.21

It is possible to snap to grid lines and grid intersection, to edges of geometry and midpoints of lines and arcs, and to certain angles. Please note that snapping does not produce constraints in and of itself. For example, only if Auto constraints is switched on will snapping to an edge produce a Point on object constraint. But just picking a point on the edge would then have the same result.

On-View-Parameters

introduced in version 1.0

Depending on the selected option in the preferences only the dimensional On-View-Parameters or both the dimensional and the positional On-View-Parameters can be enabled. Positional parameters allow the input of exact coordinates, for example the center of a circle, or the start point of a line. Dimensional parameters allow the input of exact dimensions, for example the radius of a circle, or the length and angle of a line. On-View-Parameters are not available for all tools.

Determining the center point of a circle with the positional parameters enabled

Determining the radius of a circle with the dimensional parameters enabled

If values are entered and confirmed by pressing Enter or Tab, related constraints are added automatically. If two parameters are displayed at the same time, for example the X and Y coordinate of a point, it is possible to enter one value and pick a point to define the other. Depending on the object additional constraints may be required to fully constrain it. Constraints resulting from On-View-Parameters take precedence over those that may result from Auto constraints.

Arc created by entering all On-View-Parameters with resulting automatically created constraints

Coordinate display

If the Show coordinates beside cursor while editing preference is checked (default), the parameters of the current geometry tool (coordinates, radius, or length and angle) are displayed next to the cursor. This is deactivated while On-View-Parameters are shown.

Selection methods

While a sketch is in edit mode the following selection methods can be used:

3D view element selection

As elsewhere in FreeCAD, an element can be selected in the 3D view with a single left mouse click. But there is no need to hold down the Ctrl key when selecting multiple elements. Holding down that key is possible though and has the advantage that you can miss-click without losing the selection. Edges, points and constraints can be selected in this manner.

3D view box selection

Box selection in the 3D view works without using Std BoxSelection or Std BoxElementSelection:

  1. Make sure that no tool is active.
  2. Do one of the following:
    • Click in an empty area and drag a rectangle from left to right to select elements that lie completely inside the rectangle.
    • Click in an empty area and drag a rectangle from right to left to also select elements that touch or cross the rectangle.

You can box-select edges and points, constraints cannot be box-selected.

3D view connected geometry selection

introduced in version 1.0

Double-clicking an edge in the 3D view will select all edges directly and indirectly connected with that edge via endpoints. There is no need for the edges to be connected with Coincident constraints, endpoints need only have the same coordinates.

Sketcher Dialog selection

Edges and points can also be selected from the Elements section of the Sketcher Dialog, and constraints from the Constraints section of that dialog.

Copy, cut and paste

introduced in version 1.0

The standard keyboard shortcuts, Ctrl+C, Ctrl+X and Ctrl+V, can be used to copy, cut and paste selected Sketcher geometry including related constraints. But these tools are also available from the Sketch → Sketcher tools menu. They can be used within the same sketch but also between different sketches or separate instances of FreeCAD. Since the data is copied to the clipboard in the form of Python code, it can be used in other ways too (e.g. shared on the forum).

Tools

Araçlar

Eskiz Tezgahı araçlarının tümü, Eskiz Tezgahını yüklediğinizde görünen Eskiz menüsünde bulunur.

Some tools are also available from the 3D view context menu while a sketch is in edit mode, or from the context menus of the Sketcher Dialog.

introduced in version 0.21: If a sketch is in edit mode the Structure toolbar is hidden as none of its tools can then be used.

General

Sketcher toolbar

  • Eskiz oluştur: Seçilen bir yüz veya düzlemde yeni bir eskiz oluşturur. Bu araç yürütülürken herhangi bir yüz seçilmezse, kullanıcıdan açılır pencereden bir düzlem seçmesi istenir.
  • Eskizi uyarla: Eskizin konumunu değiştirmek için kullanılır.

Sketcher Edit Mode toolbar

Sketcher edit tools toolbar

Other

  • Stop operation: Stops any currently running geometry or constraint creation tool.

Eskiz Geometrileri

Bunlar nesne oluşturma araçlarıdır.

  • Create (poly)line:
  • Polyline (Çok noktalı çizgi): Birden çok çizgi parçasından oluşan bir çizgi çizer. Bir Polyline çizerken M tuşuna basmak, farklı polyline modları arasında geçiş yapar.
  • 2 noktadan Çizgi: İki nokta arasında Çizgi oluşturur. Çizgiler sonsuz serbestlik derecesine sahiptir.
  • Create arc:
  • Yay: Merkez, yarıçap, başlangıç ​​açısı ve bitiş açısından bir yay parçası çizer.
  • 3 nokta ile yay çiz: İki uç noktadan ve çevredeki başka bir noktadan bir yay parçası çizer.
  • Create circle/ellipse:
  • Daire: Merkez nokta ve yarıçaptan bir daire çizer.
  • Ellipse by center: Creates an ellipse by its center, an endpoint of one of its axes, and a point along the ellipse. introduced in version 1.0: Or by both endpoints of one of its axes and a point along the ellipse.
  • Create rectangle:
  • Dikdörtgen: İki zıt noktadan bir dikdörtgen çizer.
  • Create regular polygon:
  • Yedigen: Bir inşaat geometri dairesi içine bir yedigen çizer.
  • Regular polygon: Creates a regular polygon. The number of sides can be specified.
  • Create slot:
  • Yuva: Bir yarım dairenin merkezini ve diğer bir yarım dairenin son noktasını seçerek ikisi arasında bir oval çizer.
  • Create B-spline:
  • İnşaat modu: Eskiz geometrisini inşaat moduna değiştirir. İnşaat geometrisi mavi renkte gösterilir ve Eskiz düzenleme modunun dışına atılır.

Eskiz kısıtlamaları

Kısıtlamalar, uzunlukları tanımlamak, Eskiz öğeleri arasında kuralları belirlemek ve eskizleri dikey ve yatay eksenler boyunca kilitlemek için kullanılır. Bazı kısıtlamalar, Yardımcı kısıtlamaların kullanılmasını gerektirir .

  • Dimensional constraints:
  • Dimension: Is the context-sensitive constraint tool of the Sketcher Workbench. Based on the current selection, it offers appropriate dimensional constraints, but also geometric constraints. introduced in version 1.0
  • Yatay uzunluk:İki nokta veya çizgi bitiş noktaları arasındaki yatay mesafeyi sabitler. Yalnızca bir öğe seçilirse, mesafe orijine ayarlanır.
  • Dikey uzunluk: 2 nokta veya çizgi bitiş noktası arasındaki dikey uzunluğu sabitler. Yalnızca bir öğe seçilirse, uzunluk orijine ayarlanır.
  • Uzunluk: Seçili çizginin uzunluğunu sınırlayarak mesafeyi tanımlar veya aralarındaki uzunluğu sınırlayarak iki nokta arasını tanımlar.
  • Auto radius/diameter: Fixes the radius of arcs and B-spline weight circles, and the diameter of circles.
  • Yarıçap:Yarıçapı kısıtlayarak, seçilen bir yayın veya dairenin yarıçapını tanımlar.
  • İç Açı:Seçilen iki çizgi arasındaki iç açıyı tanımlar.
  • Diameter: Fixes the diameter of circles and arcs.
  • Angle: Fixes the angle between two edges, the angle of a line with the horizontal axis of the sketch, or the aperture angle of a circular arc.
  • Kilit: Seçili öğeyi, kökene göre dikey ve yatay mesafeler ayarlayarak sınırlar ve böylece o öğenin konumunu kilitler. Bu kısıtlama mesafeleri daha sonra düzenlenebilir.
  • Çakıştır:Bir noktaya, bir veya daha fazla noktayı çakıştırır.
  • Horizontal/vertical constraints:
  • Yatay: Seçili çizgileri veya çoklu çizgi öğelerini gerçek bir yatay yönde sınırlar. Bu kısıtlamayı uygulamadan önce birden fazla nesne seçilebilir.
  • Dikey: Seçilen çizgileri veya çoklu çizgi öğelerini gerçek bir dikey yönlendirmeyle sınırlar. Bu kısıtlamayı uygulamadan önce birden fazla nesne seçilebilir.
  • Paralel: İki veya daha fazla çizgiyi paralel yaptırarak sınırlar.
  • Dik: İki çizgiyi bir birine dik hale getirir veya bir yay uç noktasına bir çizgiyi dik olarak sınırlar.
  • Teğet:Seçilen iki varlık arasında teğet bir kısıtlama veya iki çizgi parçası arasında bir eş doğrusal kısıtlama oluşturur. Bir çizgi segmenti, bu yay veya daireyle teğet olmak için doğrudan bir yay veya dairenin üzerinde olmak zorunda değildir.
  • Eşit: Seçilen iki çizimi birbirine eşitler. Eğer daireler veya yaylar seçilirse yarıçapları eşitlenir.
  • Simetrik: Bir çizgi etrafında simetrik olarak iki nokta sınırlar veya seçilen ilk iki noktayı simetrik olarak seçilen üçüncü bir noktaya sınırlar.
  • Kısıtlama bloğu: Temel olarak, tek bir kısıtlama ile yerinde bir geometrik elemanın bloklanmasını sağlar.
  • Toggle constraints:

Eskiz araçları

  • Create fillet/chamfer:
  • Kavis:Bir noktada birleştirilmiş iki çizgi arasında bir kavis yapar. Her iki çizgiyi de seçin veya köşe noktasına tıklayın, ardından aracı etkinleştirin.
  • Edit edge:
  • Kırpma: Tıklanan noktaya göre bir çizgi, daire veya yay kırpar.
  • Split: Splits an edge while transferring most constraints.

Eskiz B-spline araçları

  • Insert knot: Inserts a knot into a B-spline or increases the multiplicity of an existing knot.

Sketcher visual

  • Show/hide B-spline information layer:
  • İç geometriyi göster/gizle:Seçilmiş bir elipsin, elips yayının/hiperbol/parabol veya B-spline'ın gereksiz iç geometrisini kaybeder/siler.

Obsolete tools

  • Corner-preserving fillet: Creates a fillet between two non-parallel lines while preserving their corner point. Not available in version 1.0 and above.
  • Taşı: Seçilen geometriyi, seçilen son noktayı referans alarak hareket ettirir.

Seçenekler

  • Seçenekler...: Seçenekler, Eskiz araçlarında tek kullanımlıktır.

Best practices

Öneriler

Her CAD kullanıcısı zaman içinde kendi çalışma tarzını geliştirir, ancak takip edilmesi gereken bazı genel prensipler vardır.

  • Bir dizi basit eskizle çalışmak, tek bir karmaşık olandan daha kolaydır. Örneğin, temel 3D özelliği için bir ilk çizim oluşturulabilir (kalınlık ver veya bir döndürerek), ikincisi ise bir delik veya kesik içerebilir (oyuklar). Bazı detaylar, daha sonra 3D özellikler olarak gerçekleştirilmek üzere bırakılabilir. Çok fazla varsa, eskiziniz de kavislerden kaçınmayı seçebilir ve bunları 3D özellik olarak ekleyebilirsiniz.
  • Her zaman kapalı bir profil oluşturun, aksi halde çiziminiz düzgün olmaz ve bir dizi açık yüz oluşturur. Bazı nesnelerin katı oluşturmaya dahil edilmesini istemiyorsanız, inşaat modu aracıyla bunları inşaat elemanlarına çevirin.
  • Elle eklemeniz gereken kısıtlama sayısını sınırlandırmak için otomatik kısıtlamalar özelliğini kullanın.
  • Genel bir kural olarak, önce geometrik kısıtlamaları, ardından boyutsal kısıtlamaları uygulayın ve eskizinizi en son kilitleyin. Ancak unutmayın: kurallar çiğnenmek içindir. Eskizinizle ilgili sorun yaşıyorsanız, profilinizi tamamlamadan önce birkaç nesneyi kısıtlamak faydalı olabilir.
  • Mümkünse, eskizinizi kilit sınırlamasıyla başlangıç ​​noktasına (0,0) ortalayın. Çiziminiz simetrik değilse, noktalarından bir orijini bulun veya kilitleme mesafeleri için güzel yuvarlak sayılar seçin. V0.12'de, harici sınırlamalar (eskiz kenarları gibi mevcut 3D geometriye veya diğer çizimlere sınırlama) uygulanmaz. Bu, aşağıdaki eskiz geometrisini ilk eskizinize göre bulmak için ilk eskizinize göre mesafeleri elle ayarlamanız gerektiği anlamına gelir. Orijine göre (25,75) bir kilit kısıtlaması (23.47,73.02) 'den daha kolay hatırlanır.
  • Uzunluk sınırlaması ile Yatay/Dikey uzunluk sınırlamaları arasında seçim yapma olanağınız varsa, ikincisini tercih edin. Yatay ve Dikey Mesafe kısıtlamaları hesaplamak daha kolaydır.
  • Genel olarak, kullanılacak en iyi kısıtlamalar şunlardır: Yatay ve Dikey Kısıtlamalar; Yatay ve Dikey Uzunluk Kısıtlamaları; Noktadan Noktaya Teğet. Mümkünse, bunların kullanımından kaçının: genel Uzunluk Kısıtlaması; Kenardan Kenara Teğet; Noktayı Çizgi Kısıtlamasına Onar; Simetri Kısıtlaması.

Kılavuzlar

Scripting

The Sketcher scripting page contains examples on how to create constraints from Python scripts.

Examples

For some ideas of what can be achieved with Sketcher tools, have a look at: Sketcher examples.