Informacje o wydaniu 0.21
Czy brakuje jakichś funkcji? Wspomnij o nich w wątku na forum Informacje o wydaniu v0.21.
Więcej informacji na temat sposobów przyczyniania się do rozwoju programu FreeCAD można znaleźć na stronie Pomóż w rozwoju FreeCAD.
FreeCAD 0.21 zostanie wydany w roku 2023, pobranie będzie możliwe ze strony Download. Ta strona jest podsumowaniem najciekawszych zmian i funkcji.
Starsze uwagi na temat wydania FreeCAD można znaleźć na stronie Lista funkcji.
Miejsce na przyciągający wzrok obrazek wybrany przez adminów z galerii pokazowej użytkowników.
Informacje ogólne
Interfejs użytkownika
Ściany narożników kostki nawigacyjnej są teraz sześciokątne i większe, dzięki czemu łatwiej je kliknąć.
Czcionkę, rozmiar czcionki i kolor przycisku (strzałki wokół kostki) można teraz zmienić również w preferencjach. |
Trwały przekrój przecinających się obiektów. Kliknij w obraz, aby zobaczyć animację. |
Narzędzie Wycinek z przekroju umożliwia teraz wycięcie przecinających się obiektów. Jest to przydatne w przypadku złożeń, w których czasami nie można uniknąć przecięć stykających się obiektów ze względu na problemy numeryczne. Pull request #8252. |
Styl wyświetlania wyników pomiarów utworzonych przy użyciu środowiska Część lub Projekt Części może być teraz zmieniony w preferencjach. |
Pole wyboru środowiska pracy może być teraz opcjonalnie umieszczone na pasku menu zamiast w obszarze paska narzędzi. |
Dalsze ulepszenia interfejsu użytkownika
- The button for Edit Mode has been removed from the standard toolbar. It can be re-added by customizing your toolbar. Pull request #7570
- The buttons for Print, Copy, Paste and Cut have been removed from the standard toolbar. They can be re-added by customizing your toolbar. Pull request #7571 and commit ea9a04e
- Commands to store and recall a temporary working view have been added. Pull request #7525
- Value changes with the mouse wheel in 'input fields' (a widget type used to enter values in task panels, for example by Draft Line) are disabled if the widget doesn't have the focus and the ComboBoxWheelEventFilter parameter is enabled. This prevents unwanted value changes while scrolling, as was already the case for spin and combo boxes. Pull request #7561
- It is now possible to set a default transparency for new Part or PartDesign objects in the Preferences. Pull request #7103
- There is the new orbit style Free Turntable. It can either be enabled in the Preferences or by pressing the button in the Status bar and then using the menu Settings → Orbit). Pull Request #8048
- The Std SetAppearance task panel now also has a button to set the Point Color property. Pull request #7708
- A button has been added to switch the colors of the 3D view background gradient in the Preferences. Pull request #7155
- All transparency settings use now the uniform spin button step of 5%: One click on the button in a dialog or the property editor changes the transparency by 5%. Keep the button pressed to change several 5% steps at once. Pull request #7723
- The Output window has been renamed to Report view for uniformity with the UI. Pull Request #7739
- The Image Workbench has been removed. To insert an Image Plane the Std Import command can now be used. Double-click an Image Plane to change its orientation and scale. The new Std ViewLoadImage command replaces the Image Open command. Pull Request #8955
System podstawowy i API
Rdzeń programu
- The function cbrt(x) for cubic roots was added for use in Expressions. Pull request #8629
- Many new Properties are available for scripting. Pull request #6717
- Added object creation functions
vector
,matrix
,rotation
,placement
as well as matrix functionsmrotate
,mrotatex
,mrotatey
,mrotatez
,mtranslate
for use in Expressions. Pull request #8603.
API
Nowe skrypty Python
- BSplineSurfacePy::scaleKnotsToBounds: Skaluje listy węzłów U i V, aby dopasować je do podanych granic. Pull request #7258 oraz Pull request #7385
- BSplineCurvePy::scaleKnotsToBounds: Skaluje listę węzłów, aby dopasować ją do podanych granic. Pull request #7385
- ShapeFix_EdgeConnectPy: Root class for fixing operations. commit 4d4adb93
- ShapeFix_EdgePy: Fixing invalid edge. commit 4089cbfb
- ShapeFix_FaceConnectPy: Rebuilds connectivity between faces in shell. commit a0eb2e9d
- ShapeFix_FacePy: Class for fixing operations on faces. commit b6cd635c
- ShapeFix_FixSmallFacePy: Class for fixing operations on faces. commit 4c2946c8
- ShapeFix_FixSmallSolidPy: Fixing solids with small size. commit b70d8d37
- ShapeFix_FreeBoundsPy: Intended to output free bounds of the shape. commit 1ee1aee1
- ShapeFix_RootPy: Root class for fixing operations. commit f3e941a3
- ShapeFix_ShapePy: Class for fixing operations on shapes. commit 87db9dcc
- ShapeFix_ShapeTolerancePy: Modifies tolerances of sub-shapes (vertices, edges, faces). commit 125d5b63
- ShapeFix_ShellPy: Root class for fixing operations. commit f3e941a3
- ShapeFix_SolidPy: Root class for fixing operations. commit 8d568793
- ShapeFix_SplitCommonVertexPy: Class for fixing operations on shapes. commit 4b44c54c
- ShapeFix_SplitToolPy: Tool for splitting and cutting edges. commit bbecc3f2
- ShapeFix_WireframePy: Provides methods for fixing wireframe of shape. commit 6843a461
- ShapeFix_WirePy: Class for fixing operations on wires. commit 94f6279a
- ShapeFix_WireVertexPy: Fixing disconnected edges in the wire. commit 8c6ffc99
Usunięte skrypty API
- FreeCAD.EndingAdd: zastąpiony przez FreeCAD.addImportType. Pull request #7167
- FreeCAD.EndingGet: zastąpiony przez FreeCAD.getImportType. Pull request #7167
Menadżer dodatków
Środowisko pracy Architektura
- Naprawiono kilka problemów z trybem edycji i poprawiono menu podręczne widoku Drzewa dla obiektów Łuku. Obiekty, które mogą być edytowane mają teraz opcję Edytuj w tym menu. Opcja Ustaw kolor została usunięta dla obiektów bez ściany lub mogących mieć tylko jedną ścianę. Pull request #8122
Planowane ulepszenie dla środowiska Architektura
- Arch Profile objects now support modification of the profile type after creation. Pull request #7217
- The Terrain of an Arch Site can now also be a solid. Pull request #8444
- An Arch Site no longer shows a phantom representation of the objects in its Group. Pull request #8444
- Arch SectionPlane objects now handle non-solid objects the same as solid objects. Pull request #8688
Środowisko pracy Rysunek Roboczy
- The inaccuracy of Draft Snap Near when snapping to curves was fixed. In addition, Draft Snap Perpendicular can now also snap to faces and find multiple points. To snap to a vertex (e.g. a Draft Point) Draft Snap Endpoint must now be used instead of Draft Snap Near. Pull request #7132
- To make working with layers easier their drag and drop behavior was modified. If you drop an object from a Std Group, or a group-like object such as an Arch BuildingPart, on a layer, it is no longer removed from the group, and vice versa. This works without holding down the Ctrl key. Pull request #7462
- The Draft PointArray command now supports more point object types. Any object with a shape and vertices, as well as a mesh and a point cloud can be used. Pull request #7597
- The Tree view context menus for Draft objects have been improved. Objects that can be edited with the Draft Edit command, or that have a dedicated edit solution, now have an Edit option in that menu. The Set colors option was removed for objects without a face or that can only have a single face. Pull request #7970
- The properties of Draft annotation objects have been unified. Draft Text, Draft Dimension and Draft Label objects now all have a Font Name, a Font Size and a Text Color property. The Display Mode options have been made consistent as well and are now: Screen and World. Issue #7861 and Pull request #8081
- Undo/Redo did not work properly for the Draft modification commands on Windows. Pull request #8267
Kolejne ulepszenia dla środowiska Rysunek Roboczy
- Several Draft PathArray related issues have been fixed. Pull request #7506 and Pull request #7662
- The Draft Edit command has received several improvements. For wires, B-splines and Bézier curves a Close/Open option has been added to the edge context menu. For B-splines and Bézier curves a Reverse option has been added to the same menu as well. The task panels have been cleaned up. Pull request #7527 and Pull request #7541
- The Draft Snap toolbar was changed to a standard toolbar. Keyboard shortcuts can now be assigned to snaps. But using them during a command only works if none of the input boxes in the task panel has the focus as they 'catch' the so-called in-command shortcuts. Pull request #7656
- In the task panel of the Draft SetStyle command the "Texts/dims" button has been replaced by the "Annotations" button. Pressing this button will process all annotations, including Draft Labels. Several minor additional issues were also fixed. Pull request #8190, Pull request #8195 and Pull request #8196
- Several Draft AnnotationStyleEditor bugs have been fixed and a separate Text color button has been added. Pull request #8207
- Start and End Offset properties have been added to Draft PathArray objects. Pull request #8295
- A Count property has been added to the arrays that lacked this property: the non-Link versions of Draft OrthoArray, Draft PolarArray and Draft CircularArray. Pull request #8433
Środowisko pracy MES
Iso-contours, depicting the y-component of the absolute magnetic flux density in and around a copper wire that is flown through by electric current at a frequency of 100 kHz. For more info about this model, see section 14 of the Elmer Tutorials. |
There is the new Contours filter filter that allows to draw iso-lines or iso-contours. Iso-contours are connected mesh nodes that have the same result field value. A typical example are electric field lines. |
Wynik symulacji (podgrzewania przepływającej wody), w której widocznych jest osiem obszarów siatki (jeden na każdy użyty rdzeń CPU). |
Możliwe jest teraz uruchomienie solvera Elmer przy użyciu wielu rdzeni procesora. Więcej informacji o zastrzeżeniach można znaleźć w tym wątku na forum. |
Simulation result of the imaginary part of the current density in a crucible that was heated electrically by a surrounding coil. This model is available via the FEM Examples. For more info about this model, see section 16 of the Elmer Tutorials. |
The Magnetodynamic 2D equation was added. With this it is possible to perform electromagnetic simulations in 2D. |
Simulation result of the imaginary part of the magnetic flux density in and around a copper wire that is flown through by electric current at a frequency of 100 kHz. This model is available via the FEM Examples. For more info about this model, see section 14 of the Elmer Tutorials. |
The Magnetodynamic equation was added. With this it is possible to perform electromagnetic simulations. |
W wyniku symulacji żelazny drut o kształcie litery U został zdeformowany poprzez ściśnięcie jego końców. Więcej informacji na temat tego modelu można znaleźć w sekcji 8 Poradnika Elmer. |
Dodano narzędzie Równanie deformacji. Dzięki niemu można wykonywać analizy nieliniowej sprężystości (deformacji). |
Dalsze ulepszenia MES
- When performing analyses using the CalculiX solver, there is now also a results pipeline created to visualize the results. Pull request #8525 and Pull request #8903
- It is now possible to perform transient analyses when using the Elmer solver. Pull request #9056
- The initial pressure constraint was added to set the initial internal pressure of fluids. Pull request #7364
- The current density constraint was added to set current densities for bodies and faces. Pull request #8348
- The magnetization constraint was added to set magnetizations for bodies and faces. Pull request #8393
- The flow velocity constraint and initial flow velocity constraint were completely rewritten. It is now also possible to specify a velocity via a math formula (to define a velocity profile). Pull request #8963 and Pull request #8964
Note: This is a breaking change. Analyses with existing flow velocity and initial flow velocity constraints will not work anymore. You have to create new flow velocity constraints in the analysis to make existing analyses work.
Also note: until FreeCAD 0.20.3 the results of the flow solver were wrong (fluid density and viscosity were a factor 1000 too high). Therefore the necessary recreation of the velocity constraint also assures the results will be correct. - It is now possible to define in the displacement constraint displacements as equations (displacement according to the current solver time).
- The body heat source constraint has now a task panel and it is possible to set the heat for several bodies or to use several constraints for different bodies in one analysis. Pull request #7367
- The spring constraint was not used by any solver. Now it can be used by the Elmer solver via the equations Deformation and Elasticity. Pull request #9005
- The result mesh cut function Filter function cylinder was added. Pull request #8735
- The result mesh cut function Filter function box was added. Pull request #8825
- It is now possible to open (and this way visualize) *.pvtu files (partitioned VTK unstructured grid data). A *.pvtu file is also the result of an Elmer simulation, when more than one CPU core is used for calculations. Pull request #7159
- Critical Strain Ratio has been added to the VTK result pipeline. It gives an indication of ductile rupture for materials with a "MaterialMechanicalNonlinear" object. Pull request #7467
- FEM mesh to mesh has the new parameter scale to define the scale of deformed mesh using Python. Forum thread and Pull request #7715
- The preferences have a new option to define which solver should automatically be added when creating a new analysis.
- Usability improvements:
- If you are in the FEM workbench when loading a FreeCAD file containing an analysis, the analysis gets activated automatically (you have immediate access to all FEM toolbar buttons).
- The toolbar only has buttons for solvers installed on your system. Unavailable solvers are no longer displayed.
- New example files for the following equations are available via the FEM Examples: Deformation, Flow, Flux, Heat, Magnetodynamic and Magnetodynamic 2D. Pull requests #8550, #8569, #8579, #8597, #8630 and #9004.
- New material card for carbon dioxide and a titanium alloy. Pull request #8332 and Pull request #8636
Eksport
Środowisko pracy Siatka
Planowane ulepszenia
- Wsparcie dla dodawania przezroczystości do siatki. temat na Forum oraz Commit f88305e
Środowisko pracy OpenSCAD
Środowisko pracy Część
Planowane ulepszenie dla środowiska Część
Narzędzie Punkty z siatki zostało rozszerzone, aby akceptować dowolny obiekt geometryczny jako dane wejściowe. Pull request #8730.
Środowisko pracy Projekt Części
Otwór z pogłębieniem stożkowym. |
Okno dialogowe Otwór obsługuje typ łba śruby stożkowej. |
Planowane ulepszenia środowiska Projekt Części
- In the Hole dialog, the deprecated screw head types (cheese head, cap screw etc.) have been removed. They were deprecated since FreeCAD 0.19. Holes using these types are transformed to custom countersinks/counterbore holes with the diameter and depth used by the types. Pull request #7654
- In the Additive Loft and Subtractive Loft dialogs, the previously non-functional option Closed does now create a closed loft (like a ring). Pull request #8748
- The Validate sketch command was added to Helper toolbar. Pull request #7700
- The unusable Leave sketch and View sketch commands were removed from the menu. The Edit sketch, Merge sketches and Mirror sketch commands were added to the menu. Pull request #7700
- The involute gear profile has new properties to change the tooth length. This now allows adjustments for certain types of interferences and to use the profile to create involute splines too. Pull request #8184
- The involute gear profile now offers profile shifting. Issue #5618 and Pull request #8934
Środowisko pracy Path
- Integracja Camotics. Jeśli zainstalowana jest aplikacja Camotics (wersja 1.2.2 lub nowsza), do paska narzędzi Path zostanie dodana nowa ikona. Wybierz zadanie Path i naciśnij przycisk, aby otworzyć okno dialogowe Camotics. Następnie przeciągnij suwak, aby wygenerować symulowaną bryłę w dowolnym punkcie zadania. Można również uruchomić pełną aplikację Camotics, aby uruchomić animowaną symulację. Powoduje to uzyskanie cichego post-processingu zadania i utworzenie pliku projektu camotics. Pull request #6637
- Dodatkowe łańcuchy zastępcze do automatycznego nazywania wyjść. Jeśli dane wyjściowe są dzielone na wiele plików, nazwy plików mogą automatycznie zastępować etykietę kontrolera narzędzi, WCS lub etykietę operacji. Jest to dodatek do innych istniejących ciągów zastępczych, takich jak data, nazwa zadania itp.
- Zaimplementowana opcja łamania wiórów dla cykli wiercenia w stylu dziobania. Łamanie wiórów emituje cykl G73, który powoduje, że kontroler wykonuje bardzo mały ruch wycofania, aby złamać wiór bez pełnego wycofania wiertła z otworu. G73 jest obsługiwany natywnie przez środowisko LinuxCNC. Inne postprocesory będą musiały interpretować G73 i emitować odpowiednie kody kontroli lub dekomponować retrakcję na ruchy G1/G0. Wsparcie postprocesora dla dekompozycji G73 została dodana do „refaktoryzowanych” postprocesorów.Pull request #7469
Środowisko pracy Wykres
Środowisko pracy Szkicownik
Przeciąganie węzłów krzywej złożonej. Kliknij na obrazek, aby zobaczyć animację. |
Węzły krzywej złożonej mogą być teraz przeciągane i związane jak każdy inny punkt szkicu. |
Przeciąganie krzywej złożonej. Kliknij na obrazek, jeśli animacja się nie uruchomi. |
Operacja przeciągania krzywej złożonej przesuwa teraz tylko część między węzłami. |
Dodano narzędzie Połącz krzywe. Może ono łączyć wiele krzywych w jedną krzywą złożoną. |
Kliknij na obrazek, aby zobaczyć animację. |
Szkice mogą być teraz płynnie edytowane z przodu lub z tyłu. Podczas pracy od tyłu, wierzchołki (oraz wszystkie geometrie i ograniczenia) są jednakowo wybieralne, a widok przekroju jest przełączany automatycznie. Pull request #7417 |
Siatka szkicownika została przerobiona. Dodano narzędzie Siatka. Dodano opcję automatycznego przeskalowania siatki. |
Widżet szkicownika Wiązania został przerobiony w celu uproszczenia interfejsu użytkownika. |
Widżet Element został przerobiony w celu uproszczenia interfejsu użytkownika i umożliwienia prostszego wyboru różnych części każdej geometrii: Krawędź, punkt początkowy, punkt końcowy i punkt środkowy. Pull request #7567 |
384px | Wprowadzono funkcję automatycznej zmiany rozmiaru siatki w zależności od stopnia powiększenia oraz inne usprawnienia. |
Wprowadzono podstawową funkcjonalność warstw wizualnych, na razie obsługiwane są tylko 3 zakodowane na stałe warstwy. Spodziewajcie się dalszych ulepszeń w przyszłości.
Ten PR usuwa również opcje kolejności renderowania (nie są już potrzebne) oraz widżet "Edycja kontrolek" z panelu zadań, ponieważ cała jego zawartość została przeniesiona w inne miejsca lub usunięta. Pull request #8716 |
Wprowadzono wiązanie odległości między okręgami. |
Kliknij na obrazek, aby obejrzeć animację. |
Dodano menedżera przyciągania, przyciąganie pod kątem i przyciąganie w punkcie środkowym. |
Wiązanie zbieżności może teraz działać jako wiązanie koncentryczne przy wyborze 2 lub więcej okręgów, łuków, elips lub łuków elips. |
Planowane ulepszenia środowiska Szkicownik
- The toolbar button for Constrain refraction (Snell's law) has been removed. Commit ef62fc3
- The Dimensional Constraints and Quantity Spin Boxes now support the same math as Expressions (Evaluated in place). Pull Request #7124
- The toolbar buttons for Select redundant constraints and Select conflicting constraints have been removed. Pull request #7568
- The toolbar button for Stop operation has been removed. Pull request #7569
- The 'Edit controls' section in the Sketcher dialog has been made optional. Pull request #7572
- The toolbar button for Select unconstrained DoF has been removed. Pull request #7603
- The Sketcher toolbar has been split in two: 'Sketcher-edit-mode' and 'Sketcher' (i.e. 'not edit mode'). The Sketcher toolbars that are only for edit-mode are hidden in non-edit-mode, and those only for non-edit-mode are hidden in edit-mode. The Structure toolbar is also hidden in Sketcher. Pull request #7655
- Carbon copy if possible now uses constraint names in the expressions it creates instead of an index based reference, making it more reliable. Pull request #7688
- The Sketcher 'Solver Message' taskbox has been simplified. The auto-remove-redundant checkbox has been moved to the Constraint taskbox setting button menu. The auto-update checkbox has been moved to the menu of the update button. Pull request #8864
- Split now supports more curves (ellipses, parabolas, hyperbolas and B-splines). Pull request #6971
Środowisko pracy Arkusz Kalkulacyjny
Planowane ulepszenia dla środowiska Arkusz Kalkulacyjny
Środowisko pracy Rysunek Techniczny
The SurfaceFinishSymbol tool was added to allow for the creation of surface finish symbols describing roughness, lay and waviness, but also denoting the type of surface treatment. It supports both ISO and ASME styles. As shown in the image, the existing LeaderLine tool can be used to properly refer oriented symbols to the edges of an object. | |
The ComplexSection tool was added to allow for the creation of half, offset and aligned sections. |
Kolejne ulepszenia dla środowiska Rysunek Techniczny
- Navigation modes have been updated to match those used in the 3D view. Pull request #7081 and Pull request #7107
- Bitmap hatching was fixed. Issue #6582 and Pull request #7121
- Support for adjustable gaps for extension lines of dimensions was added. Pull request #7133
- Multithreading was introduced for hidden line removal and face finding. Pull request #7377
- The face detection algorithm was improved. Pull request #7448
- The PrintAll tool was added. Pull request #7460
- Four tools to control the stacking order of views were added. Issue #6012 and Pull request #7460
- ActiveView now creates a screen capture instead of an SVG image. Pull request #7471
- All Latin script templates have been converted to "plain svg". Pull request #7472
- A preview was added to the task panel of the SectionView tool. Pull request #7658
- Deprecated DrawViewPart functions were removed: replaceCenterLine, replaceCosmeticEdge, replaceCosmeticVertex and replaceGeomFormat.
- The HoleShaftFit tool was added. Pull request #8455
- The AxoLengthDimension tool was added. Pull request #8359
- 3D dimensions can now be created in the same way as 2D dimensions (apart from the fact that the geometry has to be selected in a 3D view). This eliminates the need to link them manually to 3D geometry. Pull request #8141
- The DimensionRepair tool was added. Pull request #8141
Środowisko pracy Web
Zewnętrzne środowiska pracy
Środowisko pracy A2plus
Środowisko pracy Złożenie 3
Assembly4
FCGear
Statek
Kompilacja
Od tego wydania FreeCAD może być kompilowany tylko przy użyciu środowiska Qt 5.x i Python 3.x. Najniższa wspierana wersja środowiska Python to 3.8 zgodnie z FreeCAD 1.0 development goals.
Aby skompilować program FreeCAD, zapoznaj się z instrukcjami dla systemów: Linux, MacOS oraz Windows.
Obsługiwane systemy operacyjne:
- Linux Ubuntu Focal Fossa (20.04) i nowsze,
- MacOS: wersja minimalna 10.12 Sierra lub nowszy,
- Windows 7, 8, 10 i 11
Znane ograniczenia
32bit Windows
Since FreeCAD 0.19 we no longer officially support 32bit Windows. FreeCAD might work on these systems, but no support is given.
Remote Desktop under Windows
Depending on the OpenGL graphics capabilities of a computer, it might be that one encounters a crash when running FreeCAD via remote desktop. To fix this upgrade your OpenGL driver. Only if this doesn't help:
- Download this OpenGL library for 64bit Windows and extract it.
- Rename the DLL file to opengl32sw.dll and copy it to the bin subfolder of FreeCAD's installation folder (overwrite the existing DLL there).
macOS: Start Workbench shows blank page
If the Start Workbench shows only a blank page, you must enable the option Use software OpenGL in the menu FreeCAD-0.21 → Preferences → Display.