Reinforcement ColumnRebars TwoTiesSixRebars/de: Difference between revisions

From FreeCAD Documentation
(Created page with "{{Emphasis|Siehe auch:}} Architektur API, Bewehrung API und FreeCAD Grundlagen Skripten.")
 
(36 intermediate revisions by 3 users not shown)
Line 1: Line 1:
<languages/>
<languages/>

{{Docnav/de
{{Docnav/de
|
|[[Arch_Rebar_ColumnReinforcement/de|Säulenverstärkung]]
|
|[[Arch_Rebar_BeamReinforcement/de|Balkenverstärkung]]
|[[Reinforcement_Workbench/de|Reinforcement]]
|[[Arch_Workbench/de|Architektur]]
|IconL=
|IconL=Arch_Rebar_ColumnReinforcement.svg
|IconR=
|IconC=Workbench_Arch.svg
|IconC=Reinforcement_Workbench.svg
|IconR=Arch_Rebar_BeamReinforcement.svg
}}
}}


{{GuiCommand/de
{{GuiCommand/de
|Name=Reinforcement ColumnRebars
|Name=Arch Rebar ColumnReinforcement
|Name/de=Reinforcement Stützenbewehrung
|Name/de=Architektur Bewehrung SäulenVerstärkung
|MenuLocation=Arch → Rebar ToolsSäulenverstärkung oder 3D/BIM → Reinforcement tools → Stützenbewehrung
|MenuLocation=Arch → ArmierungswerkzeugeStützenbewehrung<br>3D/BIM → Bewehrungswerkzeuge → Stützenbewehrung
|Workbenches=[[Arch Workbench/de|Arch]], [[BIM Workbench/de/de|BIM]]
|Workbenches=[[Reinforcement_Workbench/de|Reinforcement]], [[Arch_Workbench/de|Arch]], [[BIM_Workbench/de|BIM]]
|SeeAlso=[[Reinforcement_Workbench/de|Reinforcement_Workbench/de]], [[Arch_Rebar/de|Arch Rebar]], [[Arch_Rebar_ColumnReinforcement/de|Säulen Verstärkung]], [[Arch_Rebar_BeamReinforcement/de|Balken Verstärkung]]
|Version=0.19
|Version=0.19
|SeeAlso=[[Reinforcement_ColumnRebars/de|Reinforcement Stützenbewehrung]], [[Reinforcement_ColumnRebars_Circular/de|Reinforcement Stützenbewehrung Ringförmig]]
}}
}}


<span id="Description"></span>
==Beschreibung==
==Beschreibung==


Das Werkzeug [[Reinforcement_ColumnRebars/de|Reinforcement Stützenbewehrung]] ermöglicht dem Anwender, Bewehrungsstäbe innerhalb einer Stütze ([[Arch Structure/de|Struktur]]-Objekt) zu erzeugen. Diese Seite zeigt ein weiteres Anwendungsbeispiel für dieses Werkzeug.
The [[Arch_Rebar_ColumnReinforcement_TwoTiesSixRebars|Column Reinforcement TwoTiesSixRebars]] tool allows the user to create reinforcing bars (Two Ties Six Rebars) inside a Column [[Arch Structure|Arch Structure]] object.


Dieses Werkzeug ist Teil des Arbeitsbereichs [[Reinforcement_Workbench/de|Reinforcement]]; dieser ist ein [[External_workbenches/de|externer Arbeitsbereich]], der mit dem [[Image:Std_AddonMgr.svg|24px]] [[Std_AddonMgr/de|Addon-Manager]] installiert werden kann.
The [[Arch_Rebar_ColumnReinforcement_TwoTiesSixRebars|Column Reinforcement TwoTiesSixRebars]] tool is also integrated into [[BIM_Workbench|BIM Workbench]].


Drei Anwendungsbeispiele stehen zur Verfügung:
This command is part of the [[Reinforcement Workbench|Reinforcement Workbench]], an [[External workbenches|external workbench]] that can be installed with the [[Image:AddonManager.svg|24px]] [[Addon Manager|Addon Manager]] via the {{MenuCommand|Tools → Addon manager → Reinforcement}} menu.
* [[Reinforcement_ColumnRebars/de|Rechteckige Stütze mit einzelnem Bügel]]
* [[#Anwendung|Rechteckige Stütze mit zwei Bügeln und sechs Stäben (siehe unten)]]
* [[Reinforcement_ColumnRebars_Circular/de|Runde Stütze]]


[[Image:Arch_Rebar_ColumnReinforcement_TwoTies_example.png|400px]]
[[Image:Arch_Rebar_ColumnReinforcement_TwoTies_example.png|400px]]
{{Caption|Stützenbewehrung mit zwei Bügeln und sechs Stäben (Bewehrungskorb) innerhalb einer [[Arch_Structure/de|Stütze]]}}


<span id="Usage"></span>
{{Caption|TwoTiesSixRebars Column Reinforcement inside a Column [[Arch Structure|Arch Structure]]}}
==Anwendung==


1. Select any face of a previously created {{Button|[[Image:Arch_Structure.svg|16px]] [[Arch Structure|Arch Structure]]}} object.
==Usage==


1. Select any face of a previously created {{Button|[[Image:Arch_Structure.svg|16px]] [[Arch Structure|Arch Structure]]}} object. <br>
2. Then select {{Button|[[Image:Reinforcement_ColumnRebars.svg|16px]] [[Reinforcement_ColumnRebars|Column Reinforcement]]}} from the rebar tools.
2. Then select {{Button|[[Image:Arch_Rebar_ColumnReinforcement.svg|16px]] [[Arch Rebar ColumnReinforcement|Column Reinforcement]]}} from the rebar tools. <br>
3. A dialog box will pop-out on screen as shown below. <br>


3. A dialog box will pop-out on screen as shown below.
[[Image:ColumnReinforcementDialog_Ties.png|700px]]


: [[Image:ColumnReinforcementDialog_Ties.png|700px]]
{{Caption|Dialog Box for the Arch Rebar ColumnReinforcement tool}}
: {{Caption|Dialog Box for the Arch Rebar ColumnReinforcement tool}}


4. Select the TwoTiesSixRebars type of column reinforcement from drop down menu on right side. <br>
4. Select the TwoTiesSixRebars type of column reinforcement from drop down menu on right side.


[[Image:TwoTiesColumnReinforcementDialog_Ties.png|700px]]
: [[Image:TwoTiesColumnReinforcementDialog_Ties.png|700px]]
: {{Caption|Dialog Box for the TwoTiesSixRebars ColumnReinforcement}}


5. Give inputs for data related to ties.
{{Caption|Dialog Box for the TwoTiesSixRebars ColumnReinforcement}}


6. Click {{Button|Next}} and the dialog box will be updated as shown below.
5. Give inputs for data related to ties. <br>
6. Click {{Button|Next}} and the dialog box will be updated as shown below. <br>


[[Image:TwoTiesColumnReinforcementDialog_MainRebars.png|700px]]
: [[Image:TwoTiesColumnReinforcementDialog_MainRebars.png|700px]]
: {{Caption|Dialog Box for Main Rebars data}}


7. Select desired rebar type and fill data for main rebars.
{{Caption|Dialog Box for Main Rebars data}}


8. Click {{Button|OK}} or {{Button|Apply}} to generate column reinforcement.
7. Select desired rebar type and fill data for main rebars. <br>
8. Click {{Button|OK}} or {{Button|Apply}} to generate column reinforcement. <br>
9. Click {{Button|Cancel}} to exit the dialog box. <br>


9. Click {{Button|Cancel}} to exit the dialog box.
==Properties==

==Properties==


'''Ties:'''
'''Ties:'''

* {{PropertyData|Left Cover}}: The distance between the left end of the tie to the left face of the structure.
* {{PropertyData|Left Cover}}: The distance between the left end of the tie to the left face of the structure.
* {{PropertyData|Right Cover}}: The distance between the right end of the tie to right face of the structure.
* {{PropertyData|Right Cover}}: The distance between the right end of the tie to right face of the structure.
Line 71: Line 79:
* {{PropertyData|Spacing}}: The distance between the axes of each tie.
* {{PropertyData|Spacing}}: The distance between the axes of each tie.
* {{PropertyData|Ties Sequence}}: The sequence of ties from top to bottom with respect to front view.
* {{PropertyData|Ties Sequence}}: The sequence of ties from top to bottom with respect to front view.



'''Main Rebars:''' Rebars present at corners of tie
'''Main Rebars:''' Rebars present at corners of tie

* {{PropertyData|Rebar Type}}: Type of main rebars.
* {{PropertyData|Rebar Type}}: Type of main rebars.
* {{PropertyData|Hook Orientation}}: Orientation of LShaped hooks.
* {{PropertyData|Hook Orientation}}: Orientation of LShaped hooks.
Line 83: Line 91:
* {{PropertyData|Diameter}}: Diameter of the main rebars.
* {{PropertyData|Diameter}}: Diameter of the main rebars.


<span id="Scripting"></span>
==Skripten==
==Skripten==


{{Emphasis|Siehe auch:}} [[Arch_API/de|Architektur API]], [[Reinforcement_API/de|Bewehrung API]] und [[FreeCAD_Scripting_Basics/de|FreeCAD Grundlagen Skripten]].
{{Emphasis|Siehe auch:}} [[Arch_API/de|Architektur API]], [[Reinforcement_API/de|Bewehrung API]] und [[FreeCAD_Scripting_Basics/de|FreeCAD Grundlagen Skripten]].


The ColumnReinforcement tool can be used in [[macros|macros]] and from the [[Python|Python]] console by using the following function:
Das Werkzeug Reinforcement Stützenbewehrung kann in [[Macros/de|Makros]] und von der [[Python/de|Python]]-Konsole aus mit den folgenden Funktionen verwendet werden:


<span id="Create_Two_Ties_Six_Rebars"></span>
=== Create Two Ties Six Rebars ===
===Stützenbewehrung mit zwei Bügeln und sechs Stäben erstellen===


{{Code|code=
{{Code|code=
Line 115: Line 125:
facename=None,
facename=None,
)
)

}}
}}


Line 135: Line 144:
* {{incode|ties_sequence}} is the sequence of ties from top to bottom with respect to front view; it can be {{incode|("Tie1", "Tie2")}} or {{incode|("Tie2", "Tie1")}}.
* {{incode|ties_sequence}} is the sequence of ties from top to bottom with respect to front view; it can be {{incode|("Tie1", "Tie2")}} or {{incode|("Tie2", "Tie1")}}.


==== Example ====
<span id="Example"></span>
====Beispiel====


{{Code|code=
{{Code|code=
Line 150: Line 160:


# For Straight Rebars
# For Straight Rebars

RebarGroup = TwoTiesSixRebars.makeTwoTiesSixRebars(
RebarGroup = TwoTiesSixRebars.makeTwoTiesSixRebars(
l_cover_of_ties=40,
l_cover_of_ties=40,
Line 176: Line 185:


# For LShaped Rebars with hook along x-axis
# For LShaped Rebars with hook along x-axis

RebarGroup = TwoTiesSixRebars.makeTwoTiesSixRebars(
RebarGroup = TwoTiesSixRebars.makeTwoTiesSixRebars(
l_cover_of_ties=40,
l_cover_of_ties=40,
Line 201: Line 209:
)
)


# For LShaped Rebars with hook along y-axis and tie sequence
# For LShaped Rebars with hook along y-axis and tie sequence ("Tie2", "Tie1")
("Tie2", "Tie1")


RebarGroup = TwoTiesSixRebars.makeTwoTiesSixRebars(
RebarGroup = TwoTiesSixRebars.makeTwoTiesSixRebars(
Line 228: Line 234:
facename="Face6",
facename="Face6",
)
)

}}
}}


<span id="Edition_of_Two_Ties_Six_Rebars"></span>
=== Edition of Two Ties Six Rebars ===
===Stützenbewehrung mit zwei Bügeln und sechs Stäben bearbeiten===
You can change the properties of the ties and rebars with the following function

Die Eigenschaften von Bewehrungsbügeln und Bewehrungsstäben lassen sich mit der folgenden Funktion anpassen:


{{Code|code=
{{Code|code=
Line 259: Line 266:
facename=None,
facename=None,
)
)

}}
}}


Line 266: Line 272:
* {{incode|structure}} and {{incode|facename}} may be omitted so that the rebar stays in the original structure.
* {{incode|structure}} and {{incode|facename}} may be omitted so that the rebar stays in the original structure.


==== Example ====
<span id="Example"></span>
====Beispiel====


{{Code|code=
{{Code|code=
Line 295: Line 302:
facename=None,
facename=None,
)
)

}}
}}



{{Docnav
{{Docnav/de
|[[Arch_Rebar_ColumnReinforcement|ColumnReinforcement]]
|
|[[Arch_Rebar_BeamReinforcement|BeamReinforcement]]
|
|[[Arch_Module|Arch]]
|[[Reinforcement_Workbench/de|Reinforcement]]
|IconL=Arch_Rebar_ColumnReinforcement.svg
|IconL=
|IconC=Workbench_Arch.svg
|IconR=
|IconR=Arch_Rebar_BeamReinforcement.svg
|IconC=Reinforcement_Workbench.svg
}}
}}


{{Arch Tools navi{{#translation:}}}}
[[Category:External_Command_Reference{{#translation:}}]]
[[Category:Reinforcement{{#translation:}}]]

{{Arch_Tools_navi{{#translation:}}}}
{{Userdocnavi{{#translation:}}}}
{{Userdocnavi{{#translation:}}}}

[[Category:Reinforcement{{#translation:}}]]

Latest revision as of 14:42, 10 April 2024

Reinforcement Stützenbewehrung

Menüeintrag
Arch → Armierungswerkzeuge → Stützenbewehrung
3D/BIM → Bewehrungswerkzeuge → Stützenbewehrung
Arbeitsbereich
Reinforcement, Arch, BIM
Standardtastenkürzel
Keiner
Eingeführt in Version
0.19
Siehe auch
Reinforcement Stützenbewehrung, Reinforcement Stützenbewehrung Ringförmig

Beschreibung

Das Werkzeug Reinforcement Stützenbewehrung ermöglicht dem Anwender, Bewehrungsstäbe innerhalb einer Stütze (Struktur-Objekt) zu erzeugen. Diese Seite zeigt ein weiteres Anwendungsbeispiel für dieses Werkzeug.

Dieses Werkzeug ist Teil des Arbeitsbereichs Reinforcement; dieser ist ein externer Arbeitsbereich, der mit dem Addon-Manager installiert werden kann.

Drei Anwendungsbeispiele stehen zur Verfügung:

Stützenbewehrung mit zwei Bügeln und sechs Stäben (Bewehrungskorb) innerhalb einer Stütze

Anwendung

1. Select any face of a previously created Arch Structure object.

2. Then select Column Reinforcement from the rebar tools.

3. A dialog box will pop-out on screen as shown below.

Dialog Box for the Arch Rebar ColumnReinforcement tool

4. Select the TwoTiesSixRebars type of column reinforcement from drop down menu on right side.

Dialog Box for the TwoTiesSixRebars ColumnReinforcement

5. Give inputs for data related to ties.

6. Click Next and the dialog box will be updated as shown below.

Dialog Box for Main Rebars data

7. Select desired rebar type and fill data for main rebars.

8. Click OK or Apply to generate column reinforcement.

9. Click Cancel to exit the dialog box.

Properties

Ties:

  • DatenLeft Cover: The distance between the left end of the tie to the left face of the structure.
  • DatenRight Cover: The distance between the right end of the tie to right face of the structure.
  • DatenTop Cover: The distance between tie from the top face of the structure.
  • DatenBottom Cover: The distance between tie from the bottom face of the structure.
  • DatenOffset: The distance between tie from the top/bottom face of the structure.
  • DatenDiameter: Diameter of the tie.
  • DatenBent Angle: Bent angle defines the angle at the ends of a tie.
  • DatenExtension Factor: Extension Factor defines length of end of tie, expressed in times the diameter.
  • DatenNumber: The number of ties.
  • DatenSpacing: The distance between the axes of each tie.
  • DatenTies Sequence: The sequence of ties from top to bottom with respect to front view.

Main Rebars: Rebars present at corners of tie

  • DatenRebar Type: Type of main rebars.
  • DatenHook Orientation: Orientation of LShaped hooks.
  • DatenHook Extend Along: Direction for hook extension.
  • DatenHook Extension: Length of hook of LShape rebars.
  • DatenRounding: A rounding value to be applied to the corners of the LShape rebars, expressed in times the diameter.
  • DatenTop Offset: The distance between rebar from the top face of the structure.
  • DatenBottom Offset: The distance between rebar from the bottom face of the structure.
  • DatenDiameter: Diameter of the main rebars.

Skripten

Siehe auch: Architektur API, Bewehrung API und FreeCAD Grundlagen Skripten.

Das Werkzeug Reinforcement Stützenbewehrung kann in Makros und von der Python-Konsole aus mit den folgenden Funktionen verwendet werden:

Stützenbewehrung mit zwei Bügeln und sechs Stäben erstellen

RebarGroup = makeTwoTiesSixRebars(
    l_cover_of_ties,
    r_cover_of_ties,
    t_cover_of_ties,
    b_cover_of_ties,
    offset_of_ties,
    bent_angle_of_ties,
    extension_factor_of_ties,
    dia_of_ties,
    number_spacing_check,
    number_spacing_value,
    dia_of_main_rebars,
    t_offset_of_rebars,
    b_offset_of_rebars,
    main_rebars_type="StraightRebar",
    hook_orientation="Top Inside",
    hook_extend_along="x-axis",
    l_rebar_rounding=None,
    hook_extension=None,
    ties_sequence=("Tie1", "Tie2"),
    structure=None,
    facename=None,
)
  • Creates a RebarGroup object from the given structure, which is an Arch Structure, and facename, which is a face of that structure.
    • If no structure nor facename are given, it will take the user selected face as input.
  • l_cover_of_ties, r_cover_of_ties, t_cover_of_ties, b_cover_of_ties and offset_of_ties are inner offset distances for the tie elements with respect to the faces of the structure. They are respectively the left, right, top, bottom and front/rear offsets.
  • bent_angle_of_ties define the angle of the tip of the reinforcement loop of tie elements.
  • extension_factor_of_ties define the length of the tip of the reinforcement loop of tie elements, expressed in times the diameter of tie elements.
  • dia_of_ties is the diameter of the tie elements.
  • number_spacing_check if it is True it will create as many two ties sets as given by number_spacing_value; if it is False it will create two ties sets separated by the numerical value of number_spacing_value.
  • number_spacing_value specifies the number of two ties sets, or the value of the separation between the sets, depending on number_spacing_check.
  • dia_of_main_rebars is the diameter of the main rebars.
  • t_offset_of_rebars and b_offset_of_rebars are inner offset distances for the main rebars with respect to the top and bottom faces of the structure, respectively.
  • main_rebars_type is the type of the main rebars; it can be "StraightRebar" or "LShapeRebar".
  • hook_orientation specifies the orientation of LShaped hook; it can be: "Top Inside", "Top Outside", "Bottom Inside", "Bottom Outside", "Top Right", "Top Left", "Bottom Right" or "Bottom Left".
  • hook_extend_along specifies direction for hook extension; it can be "x-axis" or "y-axis".
  • l_rebar_rounding is the parameter that determines the bending radius of the LShaped main rebars, expressed as times the diameter.
  • hook_extension is the length of hook of LShaped rebars.
  • ties_sequence is the sequence of ties from top to bottom with respect to front view; it can be ("Tie1", "Tie2") or ("Tie2", "Tie1").

Beispiel

import FreeCAD, Draft, Arch
from ColumnReinforcement import TwoTiesSixRebars

# It doesn't work if the structure is not based on a face
# Structure = Arch.makeStructure(length=1000, width=400, height=400)

Rect = Draft.makeRectangle(400, 400)
Structure = Arch.makeStructure(Rect, height=1600)
Structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()

# For Straight Rebars
RebarGroup = TwoTiesSixRebars.makeTwoTiesSixRebars(
    l_cover_of_ties=40,        
    r_cover_of_ties=40,
    t_cover_of_ties=40,
    b_cover_of_ties=40,
    offset_of_ties=100,
    bent_angle_of_ties=135,
    extension_factor_of_ties=2,
    dia_of_ties=8,
    number_spacing_check=True,
    number_spacing_value=10,
    dia_of_main_rebars=16,
    t_offset_of_rebars=40,
    b_offset_of_rebars=40,
    main_rebars_type="StraightRebar",
    hook_orientation="Top Inside",
    hook_extend_along="x-axis",
    l_rebar_rounding=None,
    hook_extension=None,
    ties_sequence=("Tie1", "Tie2"),
    structure=Structure,
    facename="Face6",
)

# For LShaped Rebars with hook along x-axis
RebarGroup = TwoTiesSixRebars.makeTwoTiesSixRebars(
    l_cover_of_ties=40,
    r_cover_of_ties=40,
    t_cover_of_ties=40,
    b_cover_of_ties=40,
    offset_of_ties=100,
    bent_angle_of_ties=135,
    extension_factor_of_ties=2,
    dia_of_ties=8,
    number_spacing_check=True,
    number_spacing_value=10,
    dia_of_main_rebars=16,
    t_offset_of_rebars=-40,
    b_offset_of_rebars=-40,
    main_rebars_type="LShapeRebar",
    hook_orientation="Top Outside",
    hook_extend_along="x-axis",
    l_rebar_rounding=2,
    hook_extension=40,
    ties_sequence=("Tie1", "Tie2"),
    structure=Structure,
    facename="Face6",
)

# For LShaped Rebars with hook along y-axis and tie sequence ("Tie2", "Tie1")

RebarGroup = TwoTiesSixRebars.makeTwoTiesSixRebars(
    l_cover_of_ties=40,        
    r_cover_of_ties=40,
    t_cover_of_ties=40,
    b_cover_of_ties=40,
    offset_of_ties=100,
    bent_angle_of_ties=135,
    extension_factor_of_ties=2,
    dia_of_ties=8,
    number_spacing_check=True,
    number_spacing_value=10,
    dia_of_main_rebars=16,
    t_offset_of_rebars=-40,
    b_offset_of_rebars=-40,
    main_rebars_type="LShapeRebar",
    hook_orientation="Top Outside",
    hook_extend_along="y-axis",
    l_rebar_rounding=2,
    hook_extension=40,
    ties_sequence=("Tie2", "Tie1"),
    structure=Structure,
    facename="Face6",
)

Stützenbewehrung mit zwei Bügeln und sechs Stäben bearbeiten

Die Eigenschaften von Bewehrungsbügeln und Bewehrungsstäben lassen sich mit der folgenden Funktion anpassen:

rebar_group = editTwoTiesSixRebars(
    rebar_group,
    l_cover_of_ties,
    r_cover_of_ties,
    t_cover_of_ties,
    b_cover_of_ties,
    offset_of_ties,
    bent_angle_of_ties,
    extension_factor_of_ties,
    dia_of_ties,
    number_spacing_check,
    number_spacing_value,
    dia_of_main_rebars,
    t_offset_of_rebars,
    b_offset_of_rebars,
    main_rebars_type="StraightRebar",
    hook_orientation="Top Inside",
    hook_extend_along="x-axis",
    l_rebar_rounding=None,
    hook_extension=None,
    ties_sequence=("Tie1", "Tie2"),
    structure=None,
    facename=None,
)
  • rebar_group is a previously created ColumnReinforcement group object.
  • The other parameters are the same as required by the makeSingleTieFourRebars() function.
  • structure and facename may be omitted so that the rebar stays in the original structure.

Beispiel

from ColumnReinforcement import TwoTiesSixRebars

rebar_group = TwoTiesSixRebars.editTwoTiesSixRebars(
    rebar_group,                                
    l_cover_of_ties=40,        
    r_cover_of_ties=40,
    t_cover_of_ties=40,
    b_cover_of_ties=40,
    offset_of_ties=100,
    bent_angle_of_ties=135,
    extension_factor_of_ties=2,
    dia_of_ties=8,
    number_spacing_check=True,
    number_spacing_value=10,
    dia_of_main_rebars=16,
    t_offset_of_rebars=-40,
    b_offset_of_rebars=-40,
    main_rebars_type="LShapeRebar",
    hook_orientation="Top Outside",
    hook_extend_along="x-axis",
    l_rebar_rounding=2,
    hook_extension=40,
    ties_sequence=("Tie2", "Tie1"),
    structure=None,
    facename=None,
)