PartDesign LinearesMuster

From FreeCAD Documentation
Revision as of 07:27, 16 April 2023 by Edi271 (talk | contribs)

PartDesign LinearesMuster

Menüeintrag
Part Design → Muster anwenden → Lineares Muster
Arbeitsbereich
PartDesign
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
PartDesign MehrfachTransformation

Beschreibung

Das Werkzeug PartDesign LinearesMuster erstellt ein lineares Muster eines oder mehrerer Formelemente

Ein L-förmiger Block (B), der auf einer Grundplatte (A, auch als Träger bezeichnet) angebracht ist, wird für ein lineares Muster verwendet. Das Ergebnis (C) ist rechts dargestellt.

Anwendung

Erstellen

  1. Optional activate den richtigen Körper.
  2. Optional wähle eines oder mehrere select Features im Tree view oder in der 3D view.
  3. Es gibt mehrere Möglichkeiten um das Werkzeug zu starten:
    • Drücke die LinearPattern Schaltfläche.
    • Wähle die Part Design → Apply a pattern → LinearPattern Option aus dem Menü.
  4. Wenn es keinen aktiven Körper gibt, oder mehr als zwei Körper im Dokument vorhanden sind, dann öffnet der Active Body Required Dialog und zeigt an, dass einer aktiviert werden muss. Wenn es einen einzelnen Körper gibt, dann wird dieser automatisch aktiviert.
  5. Wenn keine Features ausgewählt wurden, dann öffnet Select feature task panel : wähle eine oder mehrere (drücke die Ctrl Taste) aus der Liste und wähle die OK Schaltfläche.
  6. Das LinearPattern parameters task panel öffnet. Siehe Options für weitere Informationen.
  7. Wähle die OK Schaltfläche um zu beenden.

Bearbeiten

  1. Do one of the following:
    • Double-click the LinearPattern object in the Tree view.
    • Right-click the LinearPattern object in the Tree view and select Edit LinearPattern from the context menu.
  2. The LinearPattern parameters task panel opens. See Options for more information.
  3. Press the OK button to finish.

Optionen

  • To add features:
    1. Press the Add feature button.
    2. Select a feature in the Tree view or the 3D view.
    3. Repeat to add more features.
  • To remove features:
    1. Press the Remove feature button.
    2. Do one of the following:
      • Select a feature in the Tree view or the 3D view.
      • Select a feature in the list and press the Del key.
      • Right-click a feature in the list and select Remove from the context menu.
    3. Repeat to remove more features.
  • If there are several features in the pattern, their order can be important. See PartDesign PolarPattern.
  • Specify the Direction of the pattern:
    • Normal sketch axis: The Z axis of the sketch (only available for sketch-based features).
    • Vertical sketch axis: The Y axis of the sketch (idem).
    • Horizontal sketch axis: The X axis of the sketch (idem).
    • Construction line #: A separate entry for each construction line in the sketch (idem).
    • Base X axis: The X axis of the Body.
    • Base Y axis: The Y axis of the Body.
    • Base Z axis: The Z axis of the Body.
    • Select reference...: Select a Datum Line in the Tree view or a Datum Line or edge in the 3D view.
  • Check the Reverse direction checkbox to reverse the pattern.
  • Specify the Length to be covered by the pattern.
  • Specify the number of Occurrences (including the original feature).
  • If the Update view checkbox is checked the view will update in real time.

Einschränkungen

See PartDesign PolarPattern.