Draft Edit/cs: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 43: Line 43:
#* Select an option from the context menu.
#* Select an option from the context menu.
#* If the selected option requires point input:
#* If the selected option requires point input:
#** The [[#Node_task_panel|Node task panel]] opens. See [[#Options|Options]] for more information.
#** The [[#Edit_node_task_panel|Edit node task panel]] opens. See [[#Options|Options]] for more information.
#** Pick a point in the [[3D_view|3D view]], or type coordinates and press the {{Button|[[Image:Draft_AddPoint.svg|16px]] Enter point}} button.
#** Pick a point in the [[3D_view|3D view]], or type coordinates and press the {{Button|[[Image:Draft_AddPoint.svg|16px]] Enter point}} button.
# Optionally move a node:
# Optionally move a node:
#* Click the node in the [[3D_view|3D view]].
#* Click the node in the [[3D_view|3D view]].
#* The [[#Node_task_panel|Node task panel]] opens. See [[#Options|Options]] for more information.
#* The [[#Edit_node_task_panel|Edit node task panel]] opens. See [[#Options|Options]] for more information.
#* Pick a point in the [[3D_view|3D view]], or type coordinates and press the {{Button|[[Image:Draft_AddPoint.svg|16px]] Enter point}} button.
#* Pick a point in the [[3D_view|3D view]], or type coordinates and press the {{Button|[[Image:Draft_AddPoint.svg|16px]] Enter point}} button.
#* The result depends on the object and the selected node.
#* The result depends on the object and the selected node.
Line 58: Line 58:
===Main task panel===
===Main task panel===


* Press {{KEY|O}} or the {{Button|[[Image:Draft_CloseLine.svg|16px]] Close}} button to finish the command. If a single [[Draft_Wire|Draft Wire]], [[Draft_BSpline|Draft BSpline]], [[Draft_CubicBezCurve|Draft CubicBezCurve]] or [[Draft_BezCurve|Draft BezCurve]] has been selected the object is closed.
* Press {{KEY|Esc}} or the {{Button|Close}} button to finish the command.
* Press {{KEY|Esc}} or the {{Button|Close}} button to finish the command.


===Node task panel===
===Edit node task panel===


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
Line 81: Line 80:


* If the start or end node of an open wire is moved so that they coincide, the wire is closed.
* If the start or end node of an open wire is moved so that they coincide, the wire is closed.
* Node context menu: {{Value|delete point}}. At least two points must remain.
* Node context menu: {{Value|Delete point}}. At least two points must remain.
* Edge context menu: {{Value|add point}}, {{Value|reverse wire}} ({{Version|0.20}}).
* Edge context menu: {{Value|Add point}}, {{Value|Close/Open wire}} ({{Version|1.0}}) and {{Value|Reverse wire}} ({{Version|0.20}}).


===[[Image:Draft_Arc.svg|24px]] [[Draft_Arc|Draft Arc]] and [[Image:Draft_Arc_3Points.svg|24px]] [[Draft_Arc_3Points|Draft Arc 3Points]]===
===[[Image:Draft_Arc.svg|24px]] [[Draft_Arc|Draft Arc]] and [[Image:Draft_Arc_3Points.svg|24px]] [[Draft_Arc_3Points|Draft Arc 3Points]]===


* Center node context menu: {{Value|move arc}}.
* Center node context menu: {{Value|Move arc}}.
* Start node context menu: {{Value|set first angle}}.
* Start node context menu: {{Value|Set first angle}}.
* End node context menu: {{Value|set last angle}}.
* End node context menu: {{Value|Set last angle}}.
* Mid node context menu: {{Value|set radius}}.
* Mid node context menu: {{Value|Set radius}}.
* Edge context menu: {{Value|invert arc}}.
* Edge context menu: {{Value|Invert arc}}.


===[[Image:Draft_Circle.svg|24px]] [[Draft_Circle|Draft Circle]]===
===[[Image:Draft_Circle.svg|24px]] [[Draft_Circle|Draft Circle]]===
Line 111: Line 110:


* If the start or end node of an open spline is moved so that they coincide, the spline is closed.
* If the start or end node of an open spline is moved so that they coincide, the spline is closed.
* Node context menu: {{Value|delete point}}. At least two points must remain for an open spline. For a closed spline the minimum number of points is three.
* Node context menu: {{Value|Delete point}}. At least two points must remain for an open spline. For a closed spline the minimum number of points is three.
* Edge context menu: {{Value|add point}}.
* Edge context menu: {{Value|Add point}}, {{Value|Close/Open spline}} ({{Version|1.0}}) and {{Value|Reverse spline}} ({{Version|1.0}}).


===[[Image:Draft_CubicBezCurve.svg|24px]] [[Draft_CubicBezCurve|Draft CubicBezCurve]] and [[Image:Draft_BezCurve.svg|24px]] [[Draft_BezCurve|Draft BezCurve]]===
===[[Image:Draft_CubicBezCurve.svg|24px]] [[Draft_CubicBezCurve|Draft CubicBezCurve]] and [[Image:Draft_BezCurve.svg|24px]] [[Draft_BezCurve|Draft BezCurve]]===


* If the start or end node of an open curve is moved so that they coincide, the curve is closed.
* If the start or end node of an open curve is moved so that they coincide, the curve is closed.
* Node context menu: {{Value|make sharp}}, {{Value|make tangent}}, {{Value|make symmetric}} and {{Value|delete point}}.
* Node context menu: {{Value|Delete point}}, {{Value|Make sharp}}, {{Value|Make tangent}} and {{Value|Make symmetric}}.
* Edge context menu: {{Value|add point}}.
* Edge context menu: {{Value|Add point}}, {{Value|Close/Open curve}} ({{Version|1.0}}) and {{Value|Reverse curve}} ({{Version|1.0}}).


===[[Image:Draft_Dimension.svg|24px]] [[Draft_Dimension|Draft Dimension]]===
===[[Image:Draft_Dimension.svg|24px]] [[Draft_Dimension|Draft Dimension]]===

Revision as of 17:57, 12 October 2022

Kreslení Úpravy

Umístění Menu
Draft -> Edit
Pracovní stoly
Modul kreslení, Architektura
Výchozí zástupce
Nikdo
Představen ve verzi
-
Viz také
Nikdo

Popis

Tento nástroj umožňuje grafické úpravy určitých vlastností vybraného objektu, jako jsou vrcholy Drátu nebo délka a šířka obdélníku nebo poloměr kružnice. Nástroj nedělá nic jiného než že vstoupí do editačního módu, tj. stejný výsledek jako když do editačního módu vstoupíte jiným způsobem (jako je dvojklik na objekt v okně stromu).

4 objects in Draft Edit mode: a Draft Wire (red), a Draft Arc (black), a Draft BSpline (green) and a Draft BezCurve (magenta)

Usage

See also: Draft Snap and Draft Constrain.

  1. Optionally select one or more objects. Note that although multiple objects can be in Draft Edit mode, objects can only be edited one at a time.
  2. There are several ways to invoke the command:
    • If you have not yet selected an object: double-click an object in the Tree view. This only works for supported Draft objects.
    • Press the Draft Edit button.
    • Select the Modification → Edit option from the menu.
    • Use the keyboard shortcut: D then E.
  3. If you have not yet selected an object: select an object in the 3D view.
  4. The selected objects are marked with temporary nodes, and the Main task panel opens. See Options for more information.
  5. Optionally use a node or edge context menu. These context menus are only available for some Draft objects. See Supported objects for more information.
    • Do one of the following:
      • On all operating systems: hold down E and click the node or edge. To use E you may have to click in the 3D view once to ensure that it has the focus.
      • On Windows: hold down Alt and click the node or edge.
      • On Linux: hold down Shift+Alt, Ctrl+Alt or Alt, and click the node or edge.
      • On macOS: hold down Option and click the node or edge.
    • Select an option from the context menu.
    • If the selected option requires point input:
  6. Optionally move a node:
    • Click the node in the 3D view.
    • The Edit node task panel opens. See Options for more information.
    • Pick a point in the 3D view, or type coordinates and press the Enter point button.
    • The result depends on the object and the selected node.
  7. Press Esc or the Close button (the button at the top of the task panel, without the image) to finish the command.

Volby

The single character keyboard shortcuts mentioned here can be changed. See Draft Preferences.

Main task panel

  • Press Esc or the Close button to finish the command.

Edit node task panel

  • Nástroj Úpravy pracuje v daném čase pouze s jedním vybraným objektem.
  • Nástroj Úpravy pracuje pouze s Dráty, Obdélníky, Kružnicemi a Oblouky. Jiné objekty musí být předem zkonvertovány do objektů Kreslení.
  • Klikněte na upravovaný vrchol pro jeho posunutí a potom na něj klikněte ješte jednou pro jeho upuštění.
  • Stiskněte klávesy X, Y nebo Z po zadání bodu, chcete-li získat vazbu na další bod v požadované ose.
  • Chcete-li zadat souřadnice ručně, jednoduše zadejte číslo a potom stiskněte ENTER mezi každou z komponent X, Y a Z.
  • Stisknutím klávesy CTRL během kreslení vynutíte přichycení vašeho bodu k nejbližšímu uchopovacímu místu nezávisle na vzálenosti od něho.
  • Stisknutím klávesy SHIFT během kreslení nastavíte vazbu bodu svisle nebo vodorovně v relaci k předchozímu bodu.
  • Stisknutím tlačítka ESC nebo Cancel nebo ještě jednou Úpravy zrušíte editaci.
  • Stisknutí tlačítka Přidat bod umožní přidat další bod do Drátu nebo B-křivky kliknutím na segmenty.
  • Stisknutí tlačítka Smazat umožní smazání bodu z Drátu nebo B-křivky kliknutím na mazaný bod.

Supported objects

Draft Line and Draft Wire

  • If the start or end node of an open wire is moved so that they coincide, the wire is closed.
  • Node context menu: Delete point. At least two points must remain.
  • Edge context menu: Add point, Close/Open wire (introduced in version 1.0) and Reverse wire (introduced in version 0.20).

Draft Arc and Draft Arc 3Points

  • Center node context menu: Move arc.
  • Start node context menu: Set first angle.
  • End node context menu: Set last angle.
  • Mid node context menu: Set radius.
  • Edge context menu: Invert arc.

Draft Circle

  • No context menus for this object.

Draft Ellipse

  • No context menus for this object.

Draft Rectangle

  • No context menus for this object.

Draft Polygon

  • No context menus for this object.

Draft BSpline

  • If the start or end node of an open spline is moved so that they coincide, the spline is closed.
  • Node context menu: Delete point. At least two points must remain for an open spline. For a closed spline the minimum number of points is three.
  • Edge context menu: Add point, Close/Open spline (introduced in version 1.0) and Reverse spline (introduced in version 1.0).

Draft CubicBezCurve and Draft BezCurve

  • If the start or end node of an open curve is moved so that they coincide, the curve is closed.
  • Node context menu: Delete point, Make sharp, Make tangent and Make symmetric.
  • Edge context menu: Add point, Close/Open curve (introduced in version 1.0) and Reverse curve (introduced in version 1.0).

Draft Dimension

  • Angular dimensions cannot be edited.
  • The start and end nodes of parametric dimensions cannot be moved.
  • No context menus for this object.

Arch Wall

  • A single node to control the height of the wall is displayed above the ÚdajePlacement of the wall.
  • No context menus for this object.

Arch Structure

  • No context menus for this object.

Arch Window

  • No context menus for this object.

Arch Space

  • No context menus for this object.

Arch Panel Cut

  • No context menus for this object.

Arch Panel Sheet

  • No context menus for this object.

Part Box

  • No context menus for this object.

Part Cylinder

  • No context menus for this object.

Part Sphere

  • No context menus for this object.

Part Cone

  • No context menus for this object.

Part Line

  • No context menus for this object.

Sketcher Sketch

  • Only sketches that contain a single unconstrained line can be edited.
  • No context menus for this object.

Preferences

See also: Preferences Editor and Draft Preferences.

  • The color of the temporary nodes is the same as the color of the snap symbols. This color can be changed in the preferences: Edit → Preferences... → Draft → Visual settings → Visual Settings → Color. Note that this color is not used for the temporary nodes displayed for Draft BezCurves. These nodes use the PohledLine Color of the curve instead.

Scripting

Skriptování

Není dostupné. Každý z výše uvedených objektů může být upravován přímo změnou vlastností.