Draft Edit/sv
Jump to navigation
Jump to search
Draft
User documentation
Outdated translations are marked like this.
|
Menyplacering |
---|
Draft → Edit |
Arbetsbänkar |
Skiss |
Standard genväg |
Ingen |
Introducerad i version |
- |
Se även |
Ingen |
Beskrivning
Detta verktyg tillåter dig att grafiskt redigera vissa egenskaper av det markerade objektet, som hörnen i en tråd, eller längden och bredden på en Rektangel, eller radien på en Cirkel.
4 objects in Draft Edit mode: a Draft Wire (red), a Draft Arc (black), a Draft BSpline (green) and a Draft BezCurve (magenta)
Usage
See also: Draft Snap and Draft Constrain.
- Optionally select one or more objects. Note that although multiple objects can be in Draft Edit mode, objects can only be edited one at a time.
- There are several ways to invoke the command:
- If you have not yet selected an object: double-click an object in the Tree view. This only works for supported Draft objects.
- Press the
Draft Edit button.
- Select the Modification →
Edit option from the menu.
- Use the keyboard shortcut: D then E.
- For a single object: select the Edit option from the Tree view context menu. This only works for supported Draft objects. introduced in version 0.21
- If you have not yet selected an object: select an object in the 3D view.
- The selected objects are marked with temporary nodes, and the Main task panel opens. See Options for more information.
- Optionally use a node or edge context menu. These context menus are only available for some Draft objects. See Supported objects for more information.
- Do one of the following:
- On all operating systems: hold down E and click the node or edge. To use E you may have to click in the 3D view once to ensure that it has the focus.
- On Windows: hold down Alt and click the node or edge.
- On Linux: hold down Shift+Alt, Ctrl+Alt or Alt, and click the node or edge.
- On macOS: hold down Option and click the node or edge.
- Select an option from the context menu.
- If the selected option requires point input:
- The Edit node task panel opens. See Options for more information.
- Pick a point in the 3D view, or type coordinates and press the
Enter point button.
- Do one of the following:
- Optionally move a node:
- Click the node in the 3D view.
- The Edit node task panel opens. See Options for more information.
- Pick a point in the 3D view, or type coordinates and press the
Enter point button.
- The result depends on the object and the selected node.
- Press Esc or the Close button (the button at the top of the task panel, without the image) to finish the command.
Options
The single character keyboard shortcuts mentioned here can be changed. See Draft Preferences.
Main task panel
- Press Esc or the Close button to finish the command.
Edit node task panel
- Redigeringsverktyget fungerar endast på ett markerat objekt åt gången.
- Redigeringsläget fungerar endast på Skiss Trådar, Rektanglar, Cirklar och Cirkelbågar. Andra objekttyper måste först konverteras till Skissobjekt.
- Klicka på ett redigeringshörn för att flytta det, klicka igen för att släppa det.
- Nedtryckning av CTRL kommer att snäppa din punkt till tillgängliga snäpp-punkter.
- Nedtryckning av SKIFT kommer att koppla ihop x och y värdena , så att formen behålls
- Om du trycker på ESC så avbryts funktionen.
- Om du klickar på redigeringskanppen igen så avslutas redigeringsläget
- Skriv in siffror för att manuellt mata in en koordinat.
Supported objects
Draft Line and
Draft Wire
- If the start or end node of an open wire is moved so that they coincide, the wire is closed.
- Node context menu:
Delete point
. At least two points must remain. - Edge context menu:
Add point
,Close/Open wire
(introduced in version 0.21) andReverse wire
(introduced in version 0.20).
Draft Arc and
Draft Arc 3Points
- Center node context menu:
Move arc
. - Start node context menu:
Set first angle
. - End node context menu:
Set last angle
. - Mid node context menu:
Set radius
. - Edge context menu:
Invert arc
.
Draft Circle
- No context menus for this object.
Draft Ellipse
- No context menus for this object.
Draft Rectangle
- No context menus for this object.
Draft Polygon
- No context menus for this object.
Draft BSpline
- If the start or end node of an open spline is moved so that they coincide, the spline is closed.
- Node context menu:
Delete point
. At least two points must remain for an open spline. For a closed spline the minimum number of points is three. - Edge context menu:
Add point
,Close/Open spline
(introduced in version 0.21) andReverse spline
(introduced in version 0.21).
Draft CubicBezCurve and
Draft BezCurve
- If the start or end node of an open curve is moved so that they coincide, the curve is closed.
- Node context menu:
Delete point
,Make sharp
,Make tangent
andMake symmetric
. - Edge context menu:
Add point
,Close/Open curve
(introduced in version 0.21) andReverse curve
(introduced in version 0.21).
Draft Dimension
- Angular dimensions cannot be edited.
- The start and end nodes of parametric dimensions cannot be moved.
- No context menus for this object.
Arch Wall
- A single node to control the height of the wall is displayed above the DataPlacement of the wall.
- No context menus for this object.
Arch Structure
- No context menus for this object.
Arch Window
- No context menus for this object.
Arch Space
- No context menus for this object.
Arch Panel Cut
- No context menus for this object.
Arch Panel Sheet
- No context menus for this object.
Part Box
- No context menus for this object.
Part Cylinder
- No context menus for this object.
Part Sphere
- No context menus for this object.
Part Cone
- No context menus for this object.
Part Line
- No context menus for this object.
Sketcher Sketch
- Only sketches that contain a single unconstrained line can be edited.
- No context menus for this object.
Preferences
See also: Preferences Editor and Draft Preferences.
- The color of the temporary nodes is the same as the color of the snap symbols. This color can be changed in the preferences: Edit → Preferences... → Draft → Visual settings → Visual Settings → Color. Note that this color is not used for the temporary nodes displayed for Draft BezCurves. These nodes use the VyLine Color of the curve instead.
Scripting
See also: Autogenerated API documentation and FreeCAD Scripting Basics.
There is no Python method to Draft Edit objects. To emulate the results of the command geometric properties of objects have to be modified.
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path Link array, Point Array, Point Link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to Sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select Plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap Lock, Snap Endpoint, Snap Midpoint, Snap Center, Snap Angle, Snap Intersection, Snap Perpendicular, Snap Extension, Snap Parallel, Snap Special, Snap Near, Snap Ortho, Snap Grid, Snap WorkingPlane, Snap Dimensions, Toggle Grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to Construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Toggle continue mode, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Working plane proxy: Write camera position, Write objects state

- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Path, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Hubs: User hub, Power users hub, Developer hub