Tutorials/es: Difference between revisions

From FreeCAD Documentation
No edit summary
(Updating to match new version of source page)
 
(23 intermediate revisions by the same user not shown)
Line 8: Line 8:
{{TOCright}}
{{TOCright}}


<div class="mw-translate-fuzzy">
Esta página presenta una selección de tutoriales escritos de alta calidad. Una lista completa y sin clasificar de tutoriales se puede encontrar en [[:Category:Tutorials]], una completa y ordenable se puede encontrar en la [[Tutorials/es#Tutoriales - Lista completa|tabla de abajo]].
Esta página presenta una selección de tutoriales escritos de alta calidad. Una lista completa y sin clasificar de tutoriales se puede encontrar en [[:Category:Tutorials]], una completa y ordenable se puede encontrar en la [[Tutorials/es#Tutoriales - Lista completa|tabla de abajo]].


Visite también [[Video_tutorials/es|tutoriales de vídeo]] y [[Offsite_tutorials/es|tutoriales externos]] para ver los tutoriales alojados en sitios externos. Una fuente útil de tutoriales de vídeo es [https://YouTube.com YouTube].
Visite también [[Video_tutorials/es|tutoriales de vídeo]] y [[Offsite_tutorials/es|tutoriales externos]] para ver los tutoriales alojados en sitios externos. Una fuente útil de tutoriales de vídeo es [https://YouTube.com YouTube].
</div>


<div class="mw-translate-fuzzy">
Si quieres contribuir a escribir documentación y tutoriales del wiki, consulta las directrices generales del wiki en [[WikiPages/es|Páginas Wiki]],
Si quieres contribuir a escribir documentación y tutoriales del wiki, consulta las directrices generales del wiki en [[WikiPages/es|Páginas Wiki]],
y leer las [[tutorial guidelines/es|Directrices del tutorial]].
y leer las [[tutorial guidelines/es|Directrices del tutorial]].
</div>


Tenga en cuenta la versión de FreeCAD utilizada en el tutorial, ya que algunos tutoriales pueden utilizar una versión antigua del programa. Aunque el proceso de modelado general puede seguir funcionando, algunas herramientas pueden haber cambiado.
Tenga en cuenta la versión de FreeCAD utilizada en el tutorial, ya que algunos tutoriales pueden utilizar una versión antigua del programa. Aunque el proceso de modelado general puede seguir funcionando, algunas herramientas pueden haber cambiado.


See also [[Video_tutorials|video tutorials]] and [[Books|books]].

<span id="Architecture_and_BIM"></span>
==Arquitectura y BIM==
==Arquitectura y BIM==


<gallery mode=packed heights=200px style="font-size:1.1em">
<gallery mode=packed heights=200px style="font-size:1.1em">
<div class="mw-translate-fuzzy">
File:Arch tutorial 00.jpg|link=[[Arch tutorial]]|[[Arch tutorial]] (v0.14) <br/>Esta es la introducción esencial al Ambiente de trabajo Arquitectura. Es extensa y muestra un flujo de trabajo típico, desde la importación de planos en formato DXF hasta la construcción del modelo 3D.
File:Arch tutorial 00.jpg|link=[[Arch tutorial]]|[[Arch tutorial]] (v0.14) <br/>Esta es la introducción esencial al Ambiente de trabajo Arquitectura. Es extensa y muestra un flujo de trabajo típico, desde la importación de planos en formato DXF hasta la construcción del modelo 3D.
File:Exercise arch 01.jpg|link=[[Manual:BIM_modeling]]|[[Manual:BIM_modeling|BIM modeling]] <br/>Cómo modelar una pequeña casa, producir un plano con TechDraw y exportar a IFC.
File:Exercise arch 01.jpg|link=[[Manual:BIM_modeling]]|[[Manual:BIM_modeling|BIM modeling]] <br/>Cómo modelar una pequeña casa, producir un plano con TechDraw y exportar a IFC.
Line 26: Line 34:
File:Arch_panel_tutorial_01.jpg|link=[[Arch panel tutorial]]|[[Arch panel tutorial]] (v0.15) <br/>Modelando un panel de techo de microcasa utilizando el Sketcher, la herramienta Ventana y la herramienta Panel.
File:Arch_panel_tutorial_01.jpg|link=[[Arch panel tutorial]]|[[Arch panel tutorial]] (v0.15) <br/>Modelando un panel de techo de microcasa utilizando el Sketcher, la herramienta Ventana y la herramienta Panel.
File:Arch_Wikihouse_01.jpg|link=[[Wikihouse porting tutorial/es]]|[[Wikihouse porting tutorial/es|Modelado de la WikiHouse]] <br/>Remodelación del proyecto WikiHouse utilizando bocetos y paneles, partiendo de la importación de un modelo de malla creado en SketchUp.
File:Arch_Wikihouse_01.jpg|link=[[Wikihouse porting tutorial/es]]|[[Wikihouse porting tutorial/es|Modelado de la WikiHouse]] <br/>Remodelación del proyecto WikiHouse utilizando bocetos y paneles, partiendo de la importación de un modelo de malla creado en SketchUp.
</div>
</gallery>
</gallery>


<span id="Modeling_parts"></span>
==Modelado Piezas==
==Modelado Piezas==


Line 37: Line 47:


<gallery mode=packed heights=200px style="font-size:1.1em">
<gallery mode=packed heights=200px style="font-size:1.1em">
File:GGTuto1 Vue.PNG|link=[[Creating a simple part with PartDesign]]|[[Creating a simple part with PartDesign]] (v0.17)<br/>An introduction to the PartDesign workflow: tracing a sketch, using pad, pocket, and moving the object.
File:GGTuto1 Vue.PNG|link=[[Creating a simple part with Part WB]]|[[Creating_a_simple_part_with_Part_WB|Creating a simple part with Part Workbench]]<br/>An introduction to FreeCAD and Part Workbench using primitive solids.

PD WB Tutorial018.png|link=[[Basic_Part_Design_Tutorial]]|[[Basic_Part_Design_Tutorial|Basic Part Design Tutorial]] (v0.17)<br/>Model a simple part using a feature editing methodology: creating a sketch, using pad, external references, pocket, and mirror.
File:GGTuto1 Vue.PNG|link=[[Creating a simple part with Draft and Part WB]]|[[Creating_a_simple_part_with_Draft_and_Part_WB|Creating a simple part with Draft and Part Workbench]]<br/>An introduction to modeling solids with Draft Workbench by creating a 2d profile in draft.
TBHS-model.png|link=[[Toothbrush Head Stand]]|[[Toothbrush Head Stand|Model an electric toothbrush head stand]] (v0.16)<br/>Multiple features used: sketch, distance and coincident constraints, pad, external references, fillet, chamfer, linear pattern, and draft.

Exercise lego 01.jpg|link=[[Manual:Modeling for product design]]|[[Manual:Modeling for product design|Modeling for product design]] (v0.16)<br/>Modeling a Lego block: sketches, vertical and horizontal distance constraints, pad, pocket, external reference, linear pattern, and assembly.
File:GGTuto1 Vue.PNG|link=[[Creating a simple part with PartDesign]]|[[Creating_a_simple_part_with_PartDesign|Creating a simple part with PartDesign]] (v0.17)<br/>An introduction to the PartDesign workflow: tracing a sketch, using pad, pocket, and moving the object.
Exercise table complete.jpg|link=[[Manual:Traditional modeling, the CSG way]]|[[Manual:Traditional modeling, the CSG way|Traditional modeling, the CSG way]]<br/>Modeling a table by using simple solids like cubes and cylinders, and performing boolean operations (fusions and cuts) with them.
Pd_tut_final_solid.png|link=[[Basic_Part_Design_Tutorial]]|[[Basic_Part_Design_Tutorial|Basic Part Design Tutorial]] (v0.17)<br/>Model a simple part using a feature editing methodology: creating a sketch, using pad, external references, pocket, and mirror.
08_T04_Part_ShapesString_Extrude_final_cut.png|link=[[Draft ShapeString tutorial]]|[[Draft ShapeString tutorial]] (v0.19)<br/>Create engraved text on a solid: extrude a shapestring to make it solid, then use a boolean cut to carve it from another solid.
Pd_tut_final_solid.png|link=[[Basic_Part_Design_Tutorial_019]]|[[Basic_Part_Design_Tutorial_019|Basic Part Design Tutorial 019]] (v0.19 or above)<br/>An updated version of the previous tutorial that creates the same model using techniques that avoid the [[Topological_naming_problem|topological naming problem]].
10_T03_Part_ball_fillet.png|link=[[Whiffle Ball tutorial]]|[[Whiffle Ball tutorial|Create a wiffle ball]] (v0.19)<br/>Use solid primitives, like cubes and cylinders, and boolean operations, like union and cut, to create a hollowed ball.
TBHS-model.png|link=[[Toothbrush_Head_Stand]]|[[Toothbrush_Head_Stand|Model an electric toothbrush head stand]] (v0.16 or above)<br/>Multiple features used: sketch, distance and coincident constraints, pad, external references, fillet, chamfer, linear pattern, and draft.
Tutorial-normand06.jpg|link=[[Basic modeling tutorial]]|[[Basic modeling tutorial]] <br/>Create an iron angle by two methods: using solid primitives, and boolean operations (CSG); and by extruding a planar profile.
Exercise lego 01.jpg|link=[[Manual:Modeling_for_product_design]]|[[Manual:Modeling_for_product_design|Modeling for product design]] (v0.16)<br/>Modeling a Lego block: sketches, vertical and horizontal distance constraints, pad, pocket, external reference, linear pattern, and assembly.
Exercise table complete.jpg|link=[[Manual:Traditional_modeling,_the_CSG_way]]|[[Manual:Traditional_modeling,_the_CSG_way|Traditional modeling, the CSG way]]<br/>Modeling a table by using simple solids like cubes and cylinders, and performing boolean operations (fusions and cuts) with them.
08_T04_Part_ShapesString_Extrude_final_cut.png|link=[[Draft_ShapeString_tutorial]]|[[Draft_ShapeString_tutorial|Draft ShapeString tutorial]] (v0.19)<br/>Create engraved text on a solid: extrude a shapestring to make it solid, then use a boolean cut to carve it from another solid.
10_T03_Part_ball_fillet.png|link=[[Whiffle_Ball_tutorial]]|[[Whiffle_Ball_tutorial|Create a wiffle ball]] (v0.19)<br/>Use solid primitives, like cubes and cylinders, and boolean operations, like union and cut, to create a hollowed ball.
Tutorial-normand06.jpg|link=[[Basic modeling tutorial]]|[[Basic_modeling_tutorial|Basic modeling tutorial]] <br/>Create an iron angle by two methods: using solid primitives, and boolean operations (CSG); and by extruding a planar profile.
File:HTCaeroplane04.png|link=[[Aeroplane]]|[[Aeroplane|Aeroplane tutorial]] <br/>Understand placements in FreeCAD by creating a simple aeroplane model. Then learn about rotation angles, yaw (Z), pitch (Y), and roll (X).
File:HTCaeroplane04.png|link=[[Aeroplane]]|[[Aeroplane|Aeroplane tutorial]] <br/>Understand placements in FreeCAD by creating a simple aeroplane model. Then learn about rotation angles, yaw (Z), pitch (Y), and roll (X).
File:T13_14_Threads_components.png|link=[[Thread_for_Screw_Tutorial]]|[[Thread_for_Screw_Tutorial|Thread for screw tutorial]] (v0.19)<br/>Understand how to create threads with several techniques that include use of the tools [[Part_Helix|Part Helix]], [[PartDesign_AdditivePipe|PartDesign AdditivePipe]], [[Part_Sweep|Part Sweep]], [[Part_Fuse|Part Fuse]], and [[Part_Cut|Part Cut]].
File:T13_14_Threads_components.png|link=[[Thread_for_Screw_Tutorial]]|[[Thread_for_Screw_Tutorial|Thread for screw tutorial]] (v0.19)<br/>Understand how to create threads with several techniques that include use of the tools [[Part_Helix|Part Helix]], [[PartDesign_AdditivePipe|PartDesign AdditivePipe]], [[Part_Sweep|Part Sweep]], [[Part_Fuse|Part Fuse]], and [[Part_Cut|Part Cut]].
Line 65: Line 80:
</gallery>
</gallery>


<span id="Technical_Drawings"></span>
<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
</gallery>
</gallery>
Line 76: Line 92:
</gallery>
</gallery>


<span id="FEM"></span>
== MEF ==
== MEF ==


<gallery mode=packed heights=200px style="font-size:1.1em">
<gallery mode=packed heights=200px style="font-size:1.1em">
FEM example01 pic00.jpg|link=[[FEM CalculiX Cantilever 3D]]|[[FEM CalculiX Cantilever 3D|CalculiX cantilever FEM analysis]] (v0.17) <br/>This in an example included in every installation of FreeCAD; it demonstrates a basic analysis with the CalculiX FE solver. Purge the current result, re-run the solver, and view the displacements and stresses in the deformed mesh in the viewport.
FEM example01 pic00.jpg|link=[[FEM CalculiX Cantilever 3D]]|[[FEM CalculiX Cantilever 3D|CalculiX cantilever FEM analysis]] (v0.20) <br/>This in an example included in every installation of FreeCAD; it demonstrates a basic analysis with the CalculiX FE solver. Purge the current result, re-run the solver, and view the displacements and stresses in the deformed mesh in the viewport.

FEM tutorial result.png|link=[[FEM tutorial]]|[[FEM tutorial|Simple FEM introduction]] (v0.17) <br/>This is a short introduction to the steps required to perform an analysis in the FEM Workbench: model your object, create a mesh, add constraints and forces, add a material, run the solver, and visualize the results.
FEM tutorial result.png|link=[[FEM tutorial]]|[[FEM tutorial|Simple FEM introduction]] (v0.20) <br/>This is a short introduction to the steps required to perform an analysis in the FEM Workbench: model your object, create a mesh, add constraints and forces, add a material, run the solver, and visualize the results.

Figure 11 Deformed Mesh.png|link=[[FEM Shear of a Composite Block]]|[[FEM Shear of a Composite Block|FEM shear analysis of a composite block]] (v0.17) <br/>Study the deformation of a block made of a hard nucleus surrounded by a softer material: create mesh regions, add materials, set up sliding constraints, add shear loads, run the solver, and visualize the results with a clip plane.
Figure 11 Deformed Mesh.png|link=[[FEM Shear of a Composite Block]]|[[FEM Shear of a Composite Block|FEM shear analysis of a composite block]] (v0.17) <br/>Study the deformation of a block made of a hard nucleus surrounded by a softer material: create mesh regions, add materials, set up sliding constraints, add shear loads, run the solver, and visualize the results with a clip plane.

Femconcrete_Wall_3D_rx_PSS.png|link=[[Analysis_of_reinforced_concrete_with_FEM]]|[[Analysis_of_reinforced_concrete_with_FEM|Analysis of reinforced concrete with FEM]] (v0.19) <br/>Estimate the level of reinforcement required in a concrete structure to prevent brittle failure under tension or shear.
Femconcrete_Wall_3D_rx_PSS.png|link=[[Analysis_of_reinforced_concrete_with_FEM]]|[[Analysis_of_reinforced_concrete_with_FEM|Analysis of reinforced concrete with FEM]] (v0.19) <br/>Estimate the level of reinforcement required in a concrete structure to prevent brittle failure under tension or shear.

Two_balls_result_2-cropped.png|link=[[FEM_Example_Capacitance_Two_Balls]]|[[FEM_Example_Capacitance_Two_Balls|Electrostatic equation – Capacitance of two balls]] (v0.19)<br/>This example shows how to simulate a capacitance. It illustrates how to setup the example, study it's various parts, solve it using the [[FEM_SolverElmer|Elmer Solver]] and visualize the results using [[FEM_PostFilterClipRegion|Clip Filter]].

FEM_post-processing_Paraview.png|link=[[Post-Processing_of_FEM_Results_with_Paraview]]|[[Post-Processing_of_FEM_Results_with_Paraview|Post-Processing of FEM results with Paraview]] (v0.19)<br/>This tutorial explains the basics of transferring data from the FEM Workbench to Paraview and shows some of the options and settings for displaying data.
FEM_post-processing_Paraview.png|link=[[Post-Processing_of_FEM_Results_with_Paraview]]|[[Post-Processing_of_FEM_Results_with_Paraview|Post-Processing of FEM results with Paraview]] (v0.19)<br/>This tutorial explains the basics of transferring data from the FEM Workbench to Paraview and shows some of the options and settings for displaying data.
</gallery>
</gallery>


<span id="CNC_&amp;_3D_Printing"></span>
==CNC e impresión 3D ==
==CNC e impresión 3D ==


<gallery mode=packed heights=200px style="font-size:1.1em">
<gallery mode=packed heights=200px style="font-size:1.1em">
Path-WalkThroughResult.gif|link=[[Path Walkthrough for the Impatient]]|[[Path Walkthrough for the Impatient|Path Workbench for the impatient]] <br/>This is a quick presentation of the workflow for the Path Workbench: create a job, define the output, define the milling tool, define the path operations, start the simulation, and generate a G-code output file.
Path-WalkThroughResult.gif|link=[[CAM_Walkthrough_for_the_Impatient]]|[[CAM_Walkthrough_for_the_Impatient|CAM Workbench for the impatient]] <br/>This is a quick presentation of the workflow for the CAM Workbench: create a job, define the output, define the milling tool, define the path operations, start the simulation, and generate a G-code output file.
Exercise meshing 03.jpg|link=[[Manual:Preparing models for 3D printing]]|[[Manual:Preparing models for 3D printing|Preparing models for 3D printing]] (v0.16)<br/>Convert a solid object to a mesh object using the Mesh Workbench, export the mesh to STL format, and use Slic3r to prepare the G-code. Alternatively use the Cura Workbench or the Path Workbench to generate the G-code.
Exercise meshing 03.jpg|link=[[Manual:Preparing models for 3D printing]]|[[Manual:Preparing models for 3D printing|Preparing models for 3D printing]] (v0.16)<br/>Convert a solid object to a mesh object using the Mesh Workbench, export the mesh to STL format, and use Slic3r to prepare the G-code. Alternatively use the Cura Workbench or the CAM Workbench to generate the G-code.
</gallery>
</gallery>


<span id="Rendering"></span>
==Renderizado ==
==Renderizado ==


Line 112: Line 137:
</gallery>
</gallery>


<span id="Scripting"></span>
== Guión ==
== Guión ==


Line 119: Line 145:
* [[How_to_install_additional_workbenches|How to install additional workbenches]]
* [[How_to_install_additional_workbenches|How to install additional workbenches]]


== Tutorials - Comprehensive list ==

<div class="mw-translate-fuzzy">
== Tutoriales - Lista completa ==
== Tutoriales - Lista completa ==
Aquí están listados todos los tutoriales que no están en el manual '''independientemente de su calidad''''. Si un tutorial está listado en la [[:Category:Tutorials]] y no en esta tabla, por favor insértelo.
Aquí están listados todos los tutoriales que no están en el manual '''independientemente de su calidad''''. Si un tutorial está listado en la [[:Category:Tutorials]] y no en esta tabla, por favor insértelo.
</div>


{| class="wikitable sortable"
{| class="wikitable sortable"
Line 132: Line 162:
! Example files
! Example files


<!-- Template for new entries
<!-- Template for new entries
|-
|-
| [[Tutorial|Tutorial]]
| [[Tutorial|Tutorial]]
Line 142: Line 172:
| None
| None
-->
-->

|-
| [[Add_Button_to_FEM_Toolbar_Tutorial|Add Button to FEM Toolbar Tutorial]]
| Finite Element Analysis
|
|
| [[User:JohnWang|JohnWang]]
|
|


|-
|-
| [[Add_FEM_Constraint_Tutorial|Add FEM Constraint Tutorial]]
| [[Add_FEM_Constraint_Tutorial|Add FEM Constraint Tutorial]]
| Finite Element Analysis
|
|
|
|
|
| [[User:M42kus|M42kus]]
| [[User:M42kus|M42kus]]
|
|
|
|


|-
|-
| [[Add_FEM_Equation_Tutorial|Add FEM Equation Tutorial]]
| [[Add_FEM_Equation_Tutorial|Add FEM Equation Tutorial]]
| Finite Element Analysis
|
|
|
|
|
| [[User:JohnWang|JohnWang]]
| [[User:JohnWang|JohnWang]]
|
|

|-
| [[Adding_a_new_mouse_navigation_option_to_FreeCAD|Adding a new mouse navigation option to FreeCAD (unfinished)]]
| Programming
| Advanced
|
|
| [[User:Kunda1|Kunda1]]
| 0.19.x
| None

|-
| [[Advanced_Attachment_OYX|Advanced Attachment OYX]]
| Attachment
| Intermediate/Advanced
|
|
| [[User:drmacro|drmacro]]
| 0.19
| None

|-
| [[Advanced_TechDraw_Tutorial|Advanced TechDraw Tutorial (unfinished)]]
| TechDraw Workbench
| Advanced
|
| [[User:domad|domad]]
| 0.19
| None


|-
|-
Line 167: Line 233:
| 0:10
| 0:10
| Hughthecat
| Hughthecat
|
|
|
|


|-
|-
| [[Analysis_of_reinforced_concrete_with_FEM|Analysis of reinforced concrete with FEM]]
| [[Analysis_of_reinforced_concrete_with_FEM|Analysis of reinforced concrete with FEM]]
| Finite Element Analysis
| Reinforced concrete with FEM
| Intermediate
| Intermediate
| 1:00
| 1:00
| [[User:HarryvL|HarryvL]]
| [[User:HarryvL|HarryvL]]
| 0.19 or above
| 0.19 or above
|
|


|-
|-
| [[Arch_panel_tutorial|Arch panel tutorial]]
| [[Arch_panel_tutorial|Arch panel tutorial]]
| Arch Workbench
| Modeling an architectural panel
| Beginner
| Beginner
| 1:00
| 1:00
| Yorik
| Yorik
|
|
|
|


|-
|-
| [[Arch_tutorial|Arch tutorial]]
| [[Arch_tutorial|Arch tutorial]]
| Modeling
| Modeling
| Intermediate
| Intermediate
|
|
| [[User:Yorik|Yorik]]
| [[User:Yorik|Yorik]]
| 0.14
| 0.14
|
|


|-
|-
| [[Basic_Attachment_Tutorial|Basic Attachment Tutorial]]
| [[Basic_Attachment_Tutorial|Basic Attachment Tutorial]]
| Attachment
| Sketch attachment
| Beginner/intermediate
| Beginner/intermediate
| 01:00
| 1:00
| [[User:Bance|Bance]]
| [[User:Bance|Bance]]
| 0.17 and above
| 0.17 or above
| [https://github.com/BanceFC/Examples/blob/master/Basic_Attachment_Tutorial.FCStd Basic Attachment Tutorial.FCStd]
| [https://github.com/BanceFC/Examples/blob/master/Basic_Attachment_Tutorial.FCStd Basic Attachment Tutorial.FCStd]


|-
|-
| [[Basic_modeling_tutorial|Basic modeling tutorial]]
| [[Basic_modeling_tutorial|Basic modeling tutorial]]
| Modelling
| Introduction to modelling
| Beginner
| Beginner
| 0:15
| 0:15
Line 219: Line 285:
| Modeling
| Modeling
| Beginner
| Beginner
|
|
| [[User:Quick61|Mark Stephen (Quick61)]] and [[User:HarryGeier|HarryGeier]]
| [[User:Quick61|Mark Stephen (Quick61)]] and [[User:HarryGeier|HarryGeier]]
| 0.17 or above
| 0.17 or above
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17]
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17]

|-
| [[Basic_Part_Design_Tutorial_019|Basic Part Design Tutorial 019]]
| Modeling
| Beginner
| 1:00
| [[User:Onekk|Carlo Dormeletti]] and [[User:Edwilliams16|Ed Williams]]
| 0.19 or above
|


|-
|-
| [[Basic_Sketcher_Tutorial|Basic Sketcher Tutorial]]
| [[Basic_Sketcher_Tutorial|Basic Sketcher Tutorial]]
| Sketcher
| Sketcher Workbench
| Beginner
| Beginner
| 1:00
| 1:00
Line 237: Line 312:
| TechDraw Workbench
| TechDraw Workbench
| Beginner
| Beginner
|
|
| [[User:WandererFan|WandererFan]]
| [[User:WandererFan|WandererFan]]
| 0.17 and above
| 0.17 or above
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17 Sample] [https://github.com/FreeCAD/Examples/blob/master/Basic_TechDraw_Tutorial_Example_Files/Basic_TechDraw_Tutorial.fcstd Basic TechDraw Tutorial Sample]
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17 Sample] [https://github.com/FreeCAD/Examples/blob/master/Basic_TechDraw_Tutorial_Example_Files/Basic_TechDraw_Tutorial.fcstd Basic TechDraw Tutorial Sample]

|-
| [[BIM_ingame_tutorial|BIM ingame tutorial]]
| Arch Workbench
| Beginner
|
| [[User:Yorik|Yorik]]
|
|

|-
| [[CAM_Walkthrough_for_the_Impatient|CAM Walkthrough for the Impatient]]
| CAM Workbench
|
|
| Chrisb
|
|


|-
|-
Line 246: Line 339:
| Python
| Python
| Beginner
| Beginner
|
|
|
|
|
|
|
|

|-
| [[Creating_a_simple_part_with_Draft_and_Part_WB|Creating a simple part with Draft and Part WB]]
| Modeling
| Beginner
| 1:30
| Heda
| -
| -

|-
| [[Creating_a_simple_part_with_Part_WB|Creating a simple part with Part WB]]
| Modeling
| Beginner
| 2:00
| Heda
| -
| -


|-
|-
Line 262: Line 373:
|-
|-
| [[Customize_Toolbars|Customize Toolbars]]
| [[Customize_Toolbars|Customize Toolbars]]
| Customization
|
| Beginner
| Beginner
| 0:05
| 0:05
Line 274: Line 385:
| Beginner
| Beginner
| 0:30
| 0:30
| r-frank and vocx
| r-frank and vocx
| 0.17 and above
| 0.17 or above
| [https://github.com/FreeCAD/Examples/blob/master/Draft_Shapestring_Tutorial_Examples/Draft_Shapestring_Tutorial_Text.FCStd?raw=true Draft_Shapestring_Text]
| [https://github.com/FreeCAD/Examples/blob/master/Draft_Shapestring_Tutorial_Examples/Draft_Shapestring_Tutorial_Text.FCStd?raw=true Draft_Shapestring_Text]


|-
|-
| [[Draft_tutorial|Draft tutorial]]
| [[Draft_tutorial|Draft tutorial]]
| Draft Workbench
| Drafting
| Beginner
| Beginner
| 0:30
| 0:30
Line 288: Line 399:


|-
|-
| [[Engine_Block_Tutorial|Engine Block Tutorial]]
| [[Drawing_Template_HowTo|Drawing Template HowTo (obsolete)]]
| Part Workbench
| 2D Drafting
| Beginner
| Intermediate
| 1:00
| 1:00
| Andrewbuck40
| [[User:Quick61|Mark Stephen (Quick61)]]
| 0.14.3700 or above
| 0.14.3700
|

|-
| [[Example_Combined_Footing|Example Combined Footing]]
| Reinforcement Workbench
| Intermediate
|
| [[User:Shiv_Charan|Shiv Charan]]
| 0.20
| None
| None


|-
|-
| [[Example_Slab_Having_LShape_Rebars_Reinforcement_Mesh|Example Slab Having LShape Rebars Reinforcement Mesh]]
| [[Drawing_tutorial|Drawing tutorial (obsolete)]]
| Reinforcement Workbench
| Blueprints / Drawings
| Intermediate
| Beginner
| 0:15
| [[User:Drei|Drei]]
| 0.16 or above
|
|
| [[User:Shiv_Charan|Shiv Charan]]
| 0.20
| None


|-
|-
| [[Example_Slab_Having_Mesh_Of_Straight_Rebars|Example Slab Having Mesh Of Straight Rebars]]
| [[Dxf_Importer_Install|Dxf Importer Install]]
| Reinforcement Workbench
| Intermediate
|
|
| [[User:Shiv_Charan|Shiv Charan]]
| 0.20
| None

|-
| [[Example_Slab_Having_UShape_Rebars_Reinforcement_Mesh|Example Slab Having UShape Rebars Reinforcement Mesh]]
| Reinforcement Workbench
| Intermediate
| Intermediate
| 0:05
|
| [[User:Mario52|Mario52]]
| [[User:Shiv_Charan|Shiv Charan]]
| Any
| 0.20
| None
| None


|-
|-
| [[Example_Slab_Spanning_in_One_Direction|Example Slab Spanning in One Direction]]
| [[Engine_Block_Tutorial|Engine Block Tutorial]]
| Part Workbench
| Reinforcement Workbench
| Intermediate
| Beginner
| 1:00
| Andrewbuck40
| 0.14.3700
|
|
| [[User:Shiv_Charan|Shiv Charan]]
| 0.20
| None

|-
| [[Example_Slab_Spanning_in_Two_Directions|Example Slab Spanning in Two Directions]]
| Reinforcement Workbench
| Intermediate
|
| [[User:Shiv_Charan|Shiv Charan]]
| 0.20
| None


|-
|-
| [[Export_to_STL_or_OBJ|Export to STL or OBJ]]
| [[Export_to_STL_or_OBJ|Export to STL or OBJ]]
| Export to STL or OBJ
| Export
| Beginner
| Beginner
| 0:20
| 0:20
| r-frank
| r-frank
| 0.16.6703
| 0.16.6703
|
|


|-
|-
| [[Extend_FEM_Module|Extend FEM Module]]
| [[Extend_FEM_Module|Extend FEM Module]]
| Finite Element Analysis
|
|
|
|
|
| [[User:M42kus|M42kus]]
| [[User:M42kus|M42kus]]
|
|
|
|


|-
|-
| [[FEM_CalculiX_Cantilever_3D|FEM CalculiX Cantilever 3D]]
| [[FEM_CalculiX_Cantilever_3D|FEM CalculiX Cantilever 3D]]
| Finite Element Analysis
| Finite Element Analysis
| Beginner
| Beginner
| 0:10
| 0:10
| [[User:Bernd|Bernd]]
| [[User:Bernd|Bernd]]
| 0.16.6377 or above
| 0.16.6377 or above
|

|-
| [[FEM_Example_Capacitance_Two_Balls|FEM Example Capacitance Two Balls]]
| Finite Element Analysis
| Beginner
|
|
| [[User:Sudhanshu Dubey|Sudhanshu Dubey]]
| 0.19
| None


|-
|-
| [[FEM_Shear_of_a_Composite_Block|FEM Shear of a Composite Block]]
| [[FEM_Shear_of_a_Composite_Block|FEM Shear of a Composite Block]]
| Finite Element Analysis
| Finite Element Analysis
| Beginner/Intermediate
| Beginner/Intermediate
| 0:300
| 0:30
| [[User:HarryvL|HarryvL]]
| [[User:HarryvL|HarryvL]]
| 0.17.12960 or above
| 0.17.12960 or above
|
|


|-
|-
| [[FEM_tutorial|FEM tutorial]]
| [[FEM_tutorial|FEM tutorial]]
| Finite Element Analysis
| Finite Element Analysis
| Beginner
| Beginner
| 0:10
| 0:10
| [[User:Drei|Drei]]
| [[User:Drei|Drei]]
| 0.16.6700 or above
| 0.17 or above
|
|


|-
|-
| [[FEM_Tutorial_Python|FEM Tutorial Python]]
| [[FEM_Tutorial_Python|FEM Tutorial Python]]
| Finite Element Analysis
| Finite Element Analysis
| Intermediate
| Intermediate
| 0:30
| 0:30
| [[User:Bernd|Bernd]]
| [[User:Bernd|Bernd]]
| 0.18.15985 or above
| 0.18.15985 or above
|
|


|-
|-
| [[FreeCAD-Ship_s60_tutorial|FreeCAD-Ship s60 tutorial]]
| [[FreeCAD-Ship_s60_tutorial|FreeCAD-Ship s60 tutorial]]
| Ship Workbench
| Ship Workbench
| Beginner
| Beginner
|
|
|
|
|
|
|
|


|-
|-
| [[FreeCAD-Ship_s60_tutorial_(II)|FreeCAD-Ship s60 tutorial (II)]]
| [[FreeCAD-Ship_s60_tutorial_(II)|FreeCAD-Ship s60 tutorial (II)]]
| Ship Workbench
| Ship Workbench
| Beginner
| Beginner
|
|
|
|
|
|
|
|


|-
|-
| [[How_to_install_additional_workbenches|How to install additional workbenches]]
| [[How_to_install_additional_workbenches|How to install additional workbenches]]
| Programming
| Programming
| Medium programmer
| Medium programmer
| 0:15
| 0:15
| [[User:R-frank|r-frank]]
| [[User:R-frank|r-frank]]
Line 406: Line 553:
|-
|-
| [[How_to_install_macros|How to install macros]]
| [[How_to_install_macros|How to install macros]]
| Programming
| Programming
| Medium programmer
| Medium programmer
| 0:15
| 0:15
Line 415: Line 562:
|-
|-
| [[Import_from_STL_or_OBJ|Import from STL or OBJ]]
| [[Import_from_STL_or_OBJ|Import from STL or OBJ]]
| Import from STL or OBJ
| Import
| Beginner
| Beginner
| 0:30
| 0:30
| r-frank
| r-frank
| 1.0
| 0.16.6703
|
| 0.16.6703


|-
|-
| [[Import_OpenSCAD_code|Import OpenSCAD code]]
| [[Import_OpenSCAD_code|Import OpenSCAD code]]
| Import OpenSCAD code
| Import
| Beginner
| Beginner
| 0:30
| 0:30
| r-frank
| r-frank
| 0.16.6704
| 0.16.6704
| None
| None


|-
|-
| [[Import_text_and_geometry_from_Inkscape|Import text and geometry from Inkscape]]
| [[Import_text_and_geometry_from_Inkscape|Import text and geometry from Inkscape]]
| Import
| Import text and geometry from Inkscape
| Beginner
| Beginner
| 0:30
| 0:30
| r-frank
| r-frank
| 0.16.6704
| 0.16.6704
|
|


|-
|-
| [[Import/Export_IFC_-_compiling_IfcOpenShell|Import/Export IFC - compiling IfcOpenShell]]
| [[Import/Export_IFC_-_compiling_IfcOpenShell|Import/Export IFC - compiling IfcOpenShell]]
| Arch Workbench
| Arch Workbench
| Advanced
| Advanced
| 2:00
| 2:00
| Pablo Gil
| Pablo Gil
|
|
|
|


|-
|-
Line 456: Line 603:
| AnHi
| AnHi
| 0.19
| 0.19
|
|


|-
|-
| [[PartDesign_Bearingholder_Tutorial_I|PartDesign Bearingholder Tutorial I]]
| [[PartDesign_Bearingholder_Tutorial_I|PartDesign Bearingholder Tutorial I]]
| Product design - Bearingholder #1
| Product design
| Beginner
| Beginner
| 1:00
| 60 minutes
| NormandC
| NormandC
|
|
|
|


|-
|-
| [[PartDesign_Bearingholder_Tutorial_II|PartDesign Bearingholder Tutorial II]]
| [[PartDesign_Bearingholder_Tutorial_II|PartDesign Bearingholder Tutorial II]]
| Product design - Bearingholder #2
| Product design
| Beginner
| Beginner
| 1:00
| 60 minutes
| NormandC
| NormandC
|
|
|
|


|-
|-
| [[PartDesign_tutorial|PartDesign tutorial]]
| [[PartDesign_tutorial|PartDesign tutorial]]
| Sketcher
| Sketcher Workbench
| Beginner
| Beginner
| 0:15
| 0:15
| [[User:Drei|Drei]]
| [[User:Drei|Drei]]
| 0.16 or above
| 0.16 or above
|
|

|-
| [[Path_Walkthrough_for_the_Impatient|Path Walkthrough for the Impatient]]
| Path Workbench
|
|
| Chrisb
|
|


|-
|-
| [[Plot_Basic_tutorial|Plot Basic tutorial]]
| [[Plot_Basic_tutorial|Plot Basic tutorial]]
| Plot Workbench Basic Tutorial
| Plot Workbench
| Beginner
| Beginner
|
|
|
|
|
|
|
|


|-
|-
| [[Plot_MultiAxes_tutorial|Plot MultiAxes tutorial]]
| [[Plot_MultiAxes_tutorial|Plot MultiAxes tutorial]]
| Plot workbench
| Plot workbench
| Intermediate
| Intermediate
|
|
|
|
|
|
|
|


|-
|-
| [[Post-Processing_of_FEM_Results_with_Paraview|Post-Processing of FEM Results with Paraview]]
| [[Post-Processing_of_FEM_Results_with_Paraview|Post-Processing of FEM Results with Paraview]]
| Finite Element Analysis
| Post-Processing of FEM Results with ParaView
| Intermediate
| Intermediate
| 2:00
| 2:00
| [[User:HarryvL|HarryvL]]
| [[User:HarryvL|HarryvL]]
Line 522: Line 660:


|-
|-
| [[Private_Preference_Packs|Private Preference Packs]]
| [[Python_scripting_tutorial|Python scripting tutorial]]
| Customization
| Programming
| Intermediate
| Intermediate/Advanced
|
|
| [[User:Drmacro|drmacro]]
| 1.0 or above
|

|-
| [[Python_scripting_tutorial|Python scripting tutorial]]
| Programming
| Intermediate
|
|
|
|
|
|
|


|-
|-
| [[Raytracing_tutorial|Raytracing tutorial]]
| [[Raytracing_tutorial|Raytracing tutorial]]
| Raytracing
| Raytracing Workbench
| Beginner
| Beginner
| 0:010
| 0:10
| [[User:Drei|Drei]]
| [[User:Drei|Drei]]
| 0.16 or above
| 0.16 or above
|
|


|-
|-
| [[Robot_6-Axis|Robot 6-Axis]]
| [[Robot_6-Axis|Robot 6-Axis]]
| Robot Workbench
| Robot Workbench
| Intermediate
| Intermediate
|
|
|
|
|
|
|
|


|-
|-
| [[Robot_tutorial|Robot tutorial]]
| [[Robot_tutorial|Robot tutorial]]
| Robot Workbench
| Robot Workbench
| Beginner
| Beginner
|
|
| r-frank
| r-frank
|
|
|
|


|-
|-
| [[Scripted_Parts:_Ball_Bearing_-_Part_1|Scripted Parts: Ball Bearing - Part 1]]
| [[Scripted_Parts:_Ball_Bearing_-_Part_1|Scripted Parts: Ball Bearing - Part 1]]
| Python
| Part Scripting - Ball Bearing #1
| Beginner
| Beginner
| 0:30
| 0:30
| r-frank
| r-frank
| 0.16.6706
| 0.16.6706
|
|


|-
|-
| [[Scripted_Parts:_Ball_Bearing_-_Part_2|Scripted Parts: Ball Bearing - Part 2]]
| [[Scripted_Parts:_Ball_Bearing_-_Part_2|Scripted Parts: Ball Bearing - Part 2]]
| Python
| Part Scripting - Ball Bearing #2
| Beginner
| Beginner
| 0:30
| 0:30
| r-frank
| r-frank
| 0.16.6706
| 0.16.6706
|
|


|-
|-
| [[Scripts|Scripts]]
| [[Scripts|Scripts]]
| Python
| Scripting
| Beginner
| Beginner
|
|
| onekk Carlo
| onekk Carlo
| 0.19
| 0.19
|
|


|-
|-
| [[Sketcher_Micro_Tutorial_-_Constraint_Practices|Sketcher Micro Tutorial - Constraint Practices]]
| [[Sketcher_Micro_Tutorial_-_Constraint_Practices|Sketcher Micro Tutorial - Constraint Practices]]
| Sketcher
| Sketcher Workbench
| Beginner
| Beginner
| 0:30
| 0:30
| [[User:Quick61|Mark Stephen (Quick61)]] and vocx
| [[User:Quick61|Mark Stephen (Quick61)]] and vocx
| 0.19
| 0.19
| [https://forum.freecadweb.org/viewtopic.php?f=36&p=371659#p371659 Sketcher Constraints practices]
| [https://forum.freecadweb.org/viewtopic.php?f=36&p=371659#p371659 Sketcher Constraints practices]


|-
|-
| [[Sketcher_reference|Sketcher reference]]
| [[Sketcher_reference|Sketcher reference]]
| Sketcher Workbench
|
|
|
|
|
|
|
|
|
|
|


|-
|-
| [[Sketcher_requirement_for_a_sketch|Sketcher requirement for a sketch]]
| [[Sketcher_requirement_for_a_sketch|Sketcher requirement for a sketch]]
| Sketcher
| Sketcher Workbench
| Beginner
| Beginner
|
|
| [[User:Maker|Maker]]
| [[User:Maker|Maker]]
|
|
| None
| None


|-
|-
| [[Sketcher_Tutorial|Sketcher Tutorial]]
| [[Sketcher_Tutorial|Sketcher Tutorial]]
| Sketcher
| Sketcher Workbench
| Beginner
| Beginner
|
| Ulrich
|
|

|-
| [[TechDraw_HowTo_Page|TechDraw HowTo Page]]
| TechDraw Workbench
|
|
| Ulrich
|
|
|
|
| 0.19
| None


|-
|-
| [[TechDraw_pitch_circle_tutorial|TechDraw pitch circle tutorial]]
| [[TechDraw_Pitch_Circle_Tutorial|TechDraw Pitch Circle Tutorial]]
| TechDraw Workbench
| TechDraw Workbench
| Beginner
| Beginner
| 0:10
| 0:10
| Andergrin
| Andergrin
| 0.19
| None

|-
| [[TechDraw_TemplateGenerator|TechDraw TemplateGenerator]]
| TechDraw Workbench
| Intermediate
|
| [[User:FBXL5|FBXL5]]
| 0.19
| 0.19
| None
| None
Line 631: Line 796:
|-
|-
| [[TechDraw_TemplateHowTo|TechDraw TemplateHowTo]]
| [[TechDraw_TemplateHowTo|TechDraw TemplateHowTo]]
| TechDraw Workbench
| TechDraw Workbench
| Intermediate
| Intermediate
| 1:00
| 1:00
| wandererfan
| wandererfan
| 0.17
| 0.17
| None
| None


Line 641: Line 806:
| [[Thread_for_Screw_Tutorial|Thread for Screw Tutorial]]
| [[Thread_for_Screw_Tutorial|Thread for Screw Tutorial]]
| Product design
| Product design
| Advanced
| Advanced
| 1:00
| 1:00
| [[User:DeepSOIC|DeepSOIC]], [[User:Murdic|Murdic]], vocx
| [[User:DeepSOIC|DeepSOIC]], [[User:Murdic|Murdic]], vocx
| 0.19
| 0.19
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=44668 Updated: Thread for screw tutorial]
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=44668 Updated: Thread for screw tutorial]


|-
|-
| [[Toothbrush_Head_Stand|Toothbrush Head Stand]]
| [[Toothbrush_Head_Stand|Toothbrush Head Stand]]
| Modeling
| Modeling
| Beginner
| Beginner
| 1:00
| 1:00
| [[User:EmmanuelG|EmmanuelG]]
| [[User:EmmanuelG|EmmanuelG]]
| 0.16 or greater
| 0.16 or above
| [https://www.thingiverse.com/thing:2403310 Thingiverse 2403310]
| [https://www.thingiverse.com/thing:2403310 Thingiverse 2403310]


Line 659: Line 824:
| [[Topological_data_scripting|Topological data scripting]]
| [[Topological_data_scripting|Topological data scripting]]
| Programming
| Programming
| Intermediate
| Intermediate
|
|
|
|
|
|
|
|


|-
|-
| [[Transient_FEM_analysis|Transient FEM analysis]]
| [[Transient_FEM_analysis|Transient FEM analysis]]
| Finite Element Analysis
| Transient FEM analysis
|
|
|
|
|
|
|
|
|
|


|-
|-
| [[Tutorial_custom_placing_of_windows_and_doors|Tutorial custom placing of windows and doors]]
| [[Tutorial_custom_placing_of_windows_and_doors|Tutorial custom placing of windows and doors]]
| Arch Workbench
| Architecture
| Intermediate
| Intermediate
| 1:00
| 1:00
| [[User:Vocx|Vocx]]
| [[User:Vocx|Vocx]]
Line 685: Line 850:
|-
|-
| [[Tutorial_for_open_windows|Tutorial for open windows]]
| [[Tutorial_for_open_windows|Tutorial for open windows]]
| Arch Workbench
| Architecture
| Beginner
| Beginner
| 1:00
| 1:00
| [[User:Vocx|Vocx]]
| [[User:Vocx|Vocx]]
Line 694: Line 859:
|-
|-
| [[Tutorial_FreeCAD_POV_ray|Tutorial FreeCAD POV ray]]
| [[Tutorial_FreeCAD_POV_ray|Tutorial FreeCAD POV ray]]
| Raytracing Workbench
| Rendering
| Intermediate
| Intermediate
| 2:00
| 2:00
| [[User:Vocx|Vocx]]
| [[User:Vocx|Vocx]]
| 0.18 or above
| 0.18 or above
| None

|-
| [[Tutorial_KinematicAssembly|Tutorial KinematicAssembly]]
| Assembly3 Workbench
| Beginner
| 0:30
| [[User:FBXL5|FBXL5]]
| 0.20 or above
| None

|-
| [[Tutorial_KinematicController|Tutorial KinematicController]]
| Programming
| Intermediate
| 1:00
| [[User:FBXL5|FBXL5]]
| 0.20 or above
| None

|-
| [[Tutorial_KinematicSkeleton|Tutorial KinematicSkeleton]]
| Assembly3 Workbench
| Intermediate
| 0:40
| [[User:FBXL5|FBXL5]]
| 0.20
| None
| None


|-
|-
| [[Tutorial_Render_with_Blender|Tutorial Render with Blender]]
| [[Tutorial_Render_with_Blender|Tutorial Render with Blender]]
| Rendering
| Rendering
| Intermediate
| Intermediate
| 1:00
| 1:00
| [[User:Vocx|Vocx]]
| [[User:Vocx|Vocx]]
Line 713: Line 905:
| [[VRML_Preparation_for_Robot_Simulation|VRML Preparation for Robot Simulation]]
| [[VRML_Preparation_for_Robot_Simulation|VRML Preparation for Robot Simulation]]
| Robot Workbench
| Robot Workbench
| Intermediate
| Intermediate
|
|
|
|
| 0.11.4252ppa1
| 0.11.4252ppa1
|
|

|-
| [[Washers|Washers]]
|
|
|
|
|
| None


|-
|-
| [[Whiffle_Ball_tutorial|Whiffle Ball tutorial]]
| [[Whiffle_Ball_tutorial|Whiffle Ball tutorial]]
| Product design
| Product design
| Beginner
| Beginner
| 0:30
| 0:30
| r-frank and vocx
| r-frank and vocx
| 0.17 and above
| 0.17 or above
| [https://github.com/FreeCAD/Examples/blob/master/Whiffle_Ball_Tutorial_ExampleFiles/WhiffleBall_Tutorial_FCWiki.FCStd?raw=true WhiffleBall_Tutorial_FCWiki.FCStd]
| [https://github.com/FreeCAD/Examples/blob/master/Whiffle_Ball_Tutorial_ExampleFiles/WhiffleBall_Tutorial_FCWiki.FCStd?raw=true WhiffleBall_Tutorial_FCWiki.FCStd]


|-
|-
| [[Wikihouse_porting_tutorial|Wikihouse porting tutorial]]
| [[Wikihouse_porting_tutorial|Wikihouse porting tutorial]]
| Import
| Wikihouse porting tutorial
| Intermediate/Advanced
| Intermediate/Advanced
| 1:00
| 1:00
|
|
|
|
|
|


|}
|}

Latest revision as of 09:18, 18 March 2024

Esta página presenta una selección de tutoriales escritos de alta calidad. Una lista completa y sin clasificar de tutoriales se puede encontrar en Category:Tutorials, una completa y ordenable se puede encontrar en la tabla de abajo.

Visite también tutoriales de vídeo y tutoriales externos para ver los tutoriales alojados en sitios externos. Una fuente útil de tutoriales de vídeo es YouTube.

Si quieres contribuir a escribir documentación y tutoriales del wiki, consulta las directrices generales del wiki en Páginas Wiki, y leer las Directrices del tutorial.

Tenga en cuenta la versión de FreeCAD utilizada en el tutorial, ya que algunos tutoriales pueden utilizar una versión antigua del programa. Aunque el proceso de modelado general puede seguir funcionando, algunas herramientas pueden haber cambiado.

See also video tutorials and books.

Arquitectura y BIM

Modelado Piezas

FreeCAD provides two main workflows to modeling parts:

Please note that the PartDesign Workbench workflow was considerably changed from FreeCAD 0.17 onward; some of the tutorials haven't been updated and may refer to the 0.16 version.

The Raspberry Pi project has made simple tutorials that are easy to follow, particularly for those new to CAD systems:

Drafting and Sketching

</gallery>

Dibujos Técnico

MEF

CNC e impresión 3D

Renderizado

Robot workbench

Entorno de trabajo de Robot

Guión

These are tutorials that are related to scripting or programming. They are geared towards more experienced users, who are already somewhat familiar with the program.

Tutorials - Comprehensive list

Tutoriales - Lista completa

Aquí están listados todos los tutoriales que no están en el manual independientemente de su calidad'. Si un tutorial está listado en la Category:Tutorials y no en esta tabla, por favor insértelo.

Tutorial Topic Level Time to complete hh:mm Authors FreeCAD version Example files


Add Button to FEM Toolbar Tutorial Finite Element Analysis JohnWang
Add FEM Constraint Tutorial Finite Element Analysis M42kus
Add FEM Equation Tutorial Finite Element Analysis JohnWang
Adding a new mouse navigation option to FreeCAD (unfinished) Programming Advanced Kunda1 0.19.x None
Advanced Attachment OYX Attachment Intermediate/Advanced drmacro 0.19 None
Advanced TechDraw Tutorial (unfinished) TechDraw Workbench Advanced domad 0.19 None
Aeroplane Part Workbench Beginner 0:10 Hughthecat
Analysis of reinforced concrete with FEM Finite Element Analysis Intermediate 1:00 HarryvL 0.19 or above
Arch panel tutorial Arch Workbench Beginner 1:00 Yorik
Arch tutorial Modeling Intermediate Yorik 0.14
Basic Attachment Tutorial Attachment Beginner/intermediate 1:00 Bance 0.17 or above Basic Attachment Tutorial.FCStd
Basic modeling tutorial Modelling Beginner 0:15 NormandC Any None
Basic Part Design Tutorial Modeling Beginner Mark Stephen (Quick61) and HarryGeier 0.17 or above Basic Part Design for v0.17
Basic Part Design Tutorial 019 Modeling Beginner 1:00 Carlo Dormeletti and Ed Williams 0.19 or above
Basic Sketcher Tutorial Sketcher Workbench Beginner 1:00 Drei and Vocx 0.19 Basic Sketcher tutorial
Basic TechDraw Tutorial TechDraw Workbench Beginner WandererFan 0.17 or above Basic Part Design for v0.17 Sample Basic TechDraw Tutorial Sample
BIM ingame tutorial Arch Workbench Beginner Yorik
CAM Walkthrough for the Impatient CAM Workbench Chrisb
Code snippets Python Beginner
Creating a simple part with Draft and Part WB Modeling Beginner 1:30 Heda - -
Creating a simple part with Part WB Modeling Beginner 2:00 Heda - -
Creating a simple part with PartDesign Modeling Beginner 1:00 GlouGlou 0.17 or above Creating a simple PartDesign Body.FCStd
Customize Toolbars Customization Beginner 0:05 Mario52 Any None
Draft ShapeString tutorial Product Design Beginner 0:30 r-frank and vocx 0.17 or above Draft_Shapestring_Text
Draft tutorial Draft Workbench Beginner 0:30 Drei and vocx 0.19 Draft tutorial updated
Engine Block Tutorial Part Workbench Beginner 1:00 Andrewbuck40 0.14.3700
Example Combined Footing Reinforcement Workbench Intermediate Shiv Charan 0.20 None
Example Slab Having LShape Rebars Reinforcement Mesh Reinforcement Workbench Intermediate Shiv Charan 0.20 None
Example Slab Having Mesh Of Straight Rebars Reinforcement Workbench Intermediate Shiv Charan 0.20 None
Example Slab Having UShape Rebars Reinforcement Mesh Reinforcement Workbench Intermediate Shiv Charan 0.20 None
Example Slab Spanning in One Direction Reinforcement Workbench Intermediate Shiv Charan 0.20 None
Example Slab Spanning in Two Directions Reinforcement Workbench Intermediate Shiv Charan 0.20 None
Export to STL or OBJ Export Beginner 0:20 r-frank 0.16.6703
Extend FEM Module Finite Element Analysis M42kus
FEM CalculiX Cantilever 3D Finite Element Analysis Beginner 0:10 Bernd 0.16.6377 or above
FEM Example Capacitance Two Balls Finite Element Analysis Beginner Sudhanshu Dubey 0.19 None
FEM Shear of a Composite Block Finite Element Analysis Beginner/Intermediate 0:30 HarryvL 0.17.12960 or above
FEM tutorial Finite Element Analysis Beginner 0:10 Drei 0.17 or above
FEM Tutorial Python Finite Element Analysis Intermediate 0:30 Bernd 0.18.15985 or above
FreeCAD-Ship s60 tutorial Ship Workbench Beginner
FreeCAD-Ship s60 tutorial (II) Ship Workbench Beginner
How to install additional workbenches Programming Medium programmer 0:15 r-frank Any None
How to install macros Programming Medium programmer 0:15 Mario52 Any None
Import from STL or OBJ Import Beginner 0:30 r-frank 0.16.6703
Import OpenSCAD code Import Beginner 0:30 r-frank 0.16.6704 None
Import text and geometry from Inkscape Import Beginner 0:30 r-frank 0.16.6704
Import/Export IFC - compiling IfcOpenShell Arch Workbench Advanced 2:00 Pablo Gil
Measurement Of Angles On Holes TechDraw Workbench Beginner 0:01 AnHi 0.19
PartDesign Bearingholder Tutorial I Product design Beginner 1:00 NormandC
PartDesign Bearingholder Tutorial II Product design Beginner 1:00 NormandC
PartDesign tutorial Sketcher Workbench Beginner 0:15 Drei 0.16 or above
Plot Basic tutorial Plot Workbench Beginner
Plot MultiAxes tutorial Plot workbench Intermediate
Post-Processing of FEM Results with Paraview Finite Element Analysis Intermediate 2:00 HarryvL 0.19 Beam and wall
Private Preference Packs Customization Intermediate/Advanced drmacro 1.0 or above
Python scripting tutorial Programming Intermediate
Raytracing tutorial Raytracing Workbench Beginner 0:10 Drei 0.16 or above
Robot 6-Axis Robot Workbench Intermediate
Robot tutorial Robot Workbench Beginner r-frank
Scripted Parts: Ball Bearing - Part 1 Python Beginner 0:30 r-frank 0.16.6706
Scripted Parts: Ball Bearing - Part 2 Python Beginner 0:30 r-frank 0.16.6706
Scripts Python Beginner onekk Carlo 0.19
Sketcher Micro Tutorial - Constraint Practices Sketcher Workbench Beginner 0:30 Mark Stephen (Quick61) and vocx 0.19 Sketcher Constraints practices
Sketcher reference Sketcher Workbench
Sketcher requirement for a sketch Sketcher Workbench Beginner Maker None
Sketcher Tutorial Sketcher Workbench Beginner Ulrich
TechDraw HowTo Page TechDraw Workbench 0.19 None
TechDraw Pitch Circle Tutorial TechDraw Workbench Beginner 0:10 Andergrin 0.19 None
TechDraw TemplateGenerator TechDraw Workbench Intermediate FBXL5 0.19 None
TechDraw TemplateHowTo TechDraw Workbench Intermediate 1:00 wandererfan 0.17 None
Thread for Screw Tutorial Product design Advanced 1:00 DeepSOIC, Murdic, vocx 0.19 Updated: Thread for screw tutorial
Toothbrush Head Stand Modeling Beginner 1:00 EmmanuelG 0.16 or above Thingiverse 2403310
Topological data scripting Programming Intermediate
Transient FEM analysis Finite Element Analysis
Tutorial custom placing of windows and doors Arch Workbench Intermediate 1:00 Vocx 0.18 or above None
Tutorial for open windows Arch Workbench Beginner 1:00 Vocx 0.18 or above None
Tutorial FreeCAD POV ray Raytracing Workbench Intermediate 2:00 Vocx 0.18 or above None
Tutorial KinematicAssembly Assembly3 Workbench Beginner 0:30 FBXL5 0.20 or above None
Tutorial KinematicController Programming Intermediate 1:00 FBXL5 0.20 or above None
Tutorial KinematicSkeleton Assembly3 Workbench Intermediate 0:40 FBXL5 0.20 None
Tutorial Render with Blender Rendering Intermediate 1:00 Vocx 0.18 or above None
VRML Preparation for Robot Simulation Robot Workbench Intermediate 0.11.4252ppa1
Whiffle Ball tutorial Product design Beginner 0:30 r-frank and vocx 0.17 or above WhiffleBall_Tutorial_FCWiki.FCStd
Wikihouse porting tutorial Import Intermediate/Advanced 1:00