Sketcher Pause

From FreeCAD Documentation
Revision as of 10:58, 17 August 2020 by Maker (talk | contribs)

Skizzierer DirekteKopie

Menüeintrag
Skizze → Skizzengeometrien → DirekteKopie
Arbeitsbereich
Skizzierer
Standardtastenkürzel
Keiner
Eingeführt in Version
0.17
Siehe auch
Keiner


Beschreibung

Das Skizzierer EinfacheKopie Werkzeug kopiert alle Geometrien und Beschränkungen aus einer anderen Skizze in die aktive Skizze.

Maßbeschränkungen, die vor der Kopierfunktion bestehen, bleiben über Ausdrücke mit den Maßeinschränkungen der Originalskizze verknüpft.

Anwendung

  1. Vergewissere dich, dass du dich im Bearbeitungsmodus einer vorhandenen Skizze befindest.
  2. Drücke die Schaltfläche DirekteKopie Schaltfläche .
  3. Klicke auf eine Kante aus einer anderen Skizze.
  4. Sowohl Geometrieelemente als auch Beschränkungen werden in die aktive Skizze kopiert.
  5. Drücke Esc oder die rechte Maustaste, um den Vorgang zu beenden.

Notes:

  • When sketches are used in the PartDesign Workbench, normally the sketch to carbon copy should be in the same PartDesign Body as the currently active sketch. If the sketch to be copied is not in the active Body, the mouse pointer will not allow selection. In this case, hold Ctrl to allow selection of sketches from other Bodies.
  • Normally, the sketch to select should be in a plane that is parallel to the currently active sketch. If the sketch to be copied is not parallel to the currently active sketch, hold Ctrl+Alt to allow selection of non-parallel sketches. The object will then be adjusted to the active sketch's plane. Noteː as of this writing this needs a save and reload of the document to make it visible. This works for sketches located outside of the currently active Body as well.

Begrenzungen

  • Der gesamte Inhalt der Skizze wird kopiert; es ist nicht möglich, nur einen Teil davon auszuwählen.