Sketcher BSplineKnotenEinfügen

From FreeCAD Documentation
Revision as of 21:13, 14 August 2022 by FBXL5 (talk | contribs) (Created page with "==Anwendung==")
Other languages:

Sketcher BSplineInsertKnot

Menüeintrag
Sketch → Sketcher B-spline tools → Insert knot
Arbeitsbereich
Sketcher
Standardtastenkürzel
Keiner
Eingeführt in Version
0.20
Siehe auch
BSplineKnotenVielfachheit, BSplineKnotenVielfachheitErhöhen, BSplineKnotenVielfachheitVerringern

Beschreibung

Inserts a knot into an existing B-spline. If a knot already exists at the specified parameter, increases the multiplicity of that knot by one.

Anwendung

  1. Select a B-spline, then either:
    • Press the button Insert knot.
    • Use the menu Sketch → Sketcher B-spline tools → Insert knot.
  2. Move the cursor to the desired location where the new knot point is to be created, and click to insert the knot. The parametric value of the knot is displayed for reference.
  3. Optionally repeat the step above to create more knots.
  4. Right click or press Esc to exit knot insertion mode.
  5. Optionally use Increase knot multiplicity to increase the multiplicity of the knot(s).