Part Tube/de: Difference between revisions

From FreeCAD Documentation
(Created page with "==Anwendung==")
(Created page with "==Eigenschaften==")
Line 35: Line 35:
* or use the the [[Property_editor | property editor]] to edit the parameters
* or use the the [[Property_editor | property editor]] to edit the parameters


==Properties==
==Eigenschaften==


* Via the [[Property_editor | Property Editor]]:
* Via the [[Property_editor | Property Editor]]:

Revision as of 15:38, 27 December 2020

Part Tube

Menu location
Part → Primitives → Create tube
Workbenches
Part
Default shortcut
None
Introduced in version
0.19
See also
Part CreatePrimitives

Beschreibung

The Tube command inserts a tube into the active document. The tube is is geometrically treated as a cut of a smaller cylinder into a larger one. By default, the command will insert a 10 mm high tube with an outer diameter of 5 mm and an inner diameter of 2 mm. These parameters can be modified after the object has been added.

Screenshot of a Tube

Anwendung

To create a tube either:

  • press the Tube button in the toolbar
  • use the menu Part → Primitives → Create tube

To edit the tube

  • either
    • select it in the tree and double-click on it
    • edit the parameters in the appearing dialog
  • or use the the property editor to edit the parameters

Eigenschaften

  • Via the Property Editor:
    • Height: Sets the height (default is 10 mm).
    • Inner Radius: Set the inner radius (default is 2 mm).
    • Outer Radius: Set the outer radius (default is 5 mm).
    • Placement: Specifies the orientation and position of the Box in the 3D space. See Placement. The reference point is the left front lower corner of the box.
    • Label: The Label is the name given to the operation. This name can be changed at your convenience.