Part Tube/de: Difference between revisions
(Created page with "==Beschreibung==") |
(Created page with "==Anwendung==") |
||
Line 23: | Line 23: | ||
[[Image:Part_Tube-screenshot.png|Screenshot of a Tube]] |
[[Image:Part_Tube-screenshot.png|Screenshot of a Tube]] |
||
== |
==Anwendung== |
||
To create a tube either: |
To create a tube either: |
Revision as of 15:38, 27 December 2020
Part Tube |
Menu location |
---|
Part → Primitives → Create tube |
Workbenches |
Part |
Default shortcut |
None |
Introduced in version |
0.19 |
See also |
Part CreatePrimitives |
Beschreibung
The Tube command inserts a tube into the active document. The tube is is geometrically treated as a cut of a smaller cylinder into a larger one. By default, the command will insert a 10 mm high tube with an outer diameter of 5 mm and an inner diameter of 2 mm. These parameters can be modified after the object has been added.
Anwendung
To create a tube either:
To edit the tube
- either
- select it in the tree and double-click on it
- edit the parameters in the appearing dialog
- or use the the property editor to edit the parameters
Properties
- Via the Property Editor:
- Height: Sets the height (default is 10 mm).
- Inner Radius: Set the inner radius (default is 2 mm).
- Outer Radius: Set the outer radius (default is 5 mm).
- Placement: Specifies the orientation and position of the Box in the 3D space. See Placement. The reference point is the left front lower corner of the box.
- Label: The Label is the name given to the operation. This name can be changed at your convenience.
Part-Arbeitsbereich
- Grundkörper: Würfel, Kegel, Zylinder, Kugel, Torus, Grundkörper, Shapebuilder
- Objekte ändern: Boolesche Operationen, Vereinigung, Schnitt, Ausschneiden, Join features, Connect, Embed, Cutout
- Aufteilungswerkzeuge: Boolesche Fragmente, Slice a part, Slice, XOR, Part Defeaturing
- Verbund: Erzeuge Verbund, Verbund auflösen, Compound Filter; Extrudieren, Kanten abrunden, Drehen, Schnitt, Schnitte..., Abschrägen, Spiegelung, Ruled Surface, Sweep, Loft
- Offset-Werkzeuge: 3D Offset, 2D Offset, Dicke, Projection on surface
Anwenderdokumentation
- Erste Schritte
- Installation: Herunterladen, Windows, Linux, Mac, Zusätzlicher Komponenten, Docker, AppImage, Ubuntu Snap
- Grundlagen: Über FreeCAD, Graphische Oberfläche, Mausbedienung, Auswahlmethoden, Objektname, Programmeinstellungen, Arbeitsbereiche, Dokumentstruktur, Objekteigenschaften, Hilf FreeCAD, Spende
- Hilfe: Tutorien, Video Tutorien
- Arbeitsbereiche: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web