Part Module/sv
FreeCAD's CAD kapabilitet är baserad på OpenCasCade kärnan. Del modulen tillåter FreeCAD att komma åt och använda OpenCasCade objekt och funktioner. OpenCascade är en professionell CAD kärna, som erbjuder avancerad 3D geometrimanipulation och objekt. Del objekten, till skillnad från Nätmodul objekten, är mycket komplexare, och tillåter därför mycket mer avancerade operationer, som koherenta booleska operationer, ändringshistorik och parametriskt beteende.
The objects created with the Part Workbench are relatively simple; they are intended to be used with boolean operations (unions and cuts) in order to build more complex shapes. This modeling paradigm is known as the constructive solid geometry (CSG) workflow, and it was the traditional methodology used in early CAD systems. On the other hand, the PartDesign Workbench provides a more modern workflow to constructing shapes: it uses a parametrically defined sketch, that is extruded to form a basic solid body, which is then modified by parametric transformations (feature editing), until the final object is obtained.
Part objects are more complex than mesh objects created with the Mesh Workbench, as they permit more advanced operations like coherent boolean operations, modifications history, and parametric behaviour.
The Part Workbench is the basic layer that exposes the OCCT drawing functions to all workbenches in FreeCAD.
Verktygen
Alla Del modul verktygen finns i Del menyn som kommer fram när du laddar Del modulen.
Primitiver
Detta är verktyg för att skapa primitivobjekt.
- Låda: Ritar en låda genom att ge dess dimensioner
- Cylinder: Ritar en cylinder genom att ge dess dimensioner
- Sfär: Ritar en sfär genom att ge dess dimensioner
- Kon: Ritar en kon genom att ge dess dimensioner
- Torus: Ritar en torus (ring) genom att ge dess dimensioner
- CreatePrimitives: Ett verktyg för att skapa olika parametriska geometriska primitiver
- Shapebuilder: Ett verktyg för att skapa mer komplexa former från olika parametriska geometriska primitiver
Förändra objekt
Detta är verktyg för att förändra existerande objekt. De kommer att låta dig välja vilka objekt som du vill förändra.
- Extrudera: Extruderar plana ytor på ett objekt
- Rotera: Skapar ett objekt genom att rotera ett annat objekt runt en axel
- Spegling: Speglar de valda objekten runt en given axel
- Fasning: Fasar (rundar) kanterna på ett objekt
- Fasning: Fasar (klipper) kanter på ett objekt
- Ruled Surface:
- Loft: Lofts från en profil till en annan
- Sweep: Sopa en eller flera profiler längs en bana
- Offset tools:
- 3D Offset: Constructs a parallel shape at a certain distance from original.
- 2D Offset: Constructs a parallel wire at certain distance from original, or enlarges/shrinks a planar face. introduced in version 0.17
- Thickness: Hollows out a solid, leaving openings next to select faces.
- Projection on surface: Project a logo, text or any face,wire,edge to a surface. With the projection part it is possible to create a solid or wire. introduced in version 0.19
- Compound Tools:
- Make compound: Creates a compound from the selected objects.
- Explode Compound: Tool to split up compounds of shapes
- Compound Filter: The CompoundFilter can be used to extract the individual pieces.
- Join features: smart booleans for walled objects (e.g., pipes) introduced in version 0.16
- Connect: Connects interiors of objects introduced in version 0.16
- Embed: Embeds a walled object into another walled object introduced in version 0.16
- Cutout: Creates a cutout in a wall of an object for another walled object introduced in version 0.16
- Splitting tools: introduced in version 0.17
- Boolean fragments: makes all the pieces that can be obtained by Boolean operations between objects introduced in version 0.17
- Slice a part: tool to split shapes by intersection with other shapes
- Slice: Splits an object into pieces by intersections with another object introduced in version 0.17
- XOR: removes space shared by even number of objects (symmetric version of Cut) introduced in version 0.17
- Defeaturing: (v0.18)
- Sektionera: Skapar en sektion genom att skära ett objekt med ett sektioneringsplan
- Cross sections...:
Measure
File:Std Measure Menu.png Measure: Allows linear and angular measurement between points, edges, and faces.
- Measure Linear allows you to make linear measurements.
- Measure Angular allows you to make angular measurements.
- Measure Refresh updates the measurements on screen.
- Clear All Clears all measurements.
- Toggle All shows or hides all measurements.
- File:Part Measure Toggle 3d.svg Toggle 3D shows or hides 3D measurements.
- Toggle Delta shows or hides delta measurements.
Other tools
- Import: This tool allows you to add a file *.IGES, *.STEP, *.BREP to the current document.
- Export: This tool allows you to export a part object in a *.IGES, *.STEP, *.BREP file.
- BoxSelection: add to the selection the faces of the shapes that are touches by the rectangular selection. introduced in version 0.19
- Shape from Mesh: Creates a shape object from a mesh object.
- Points from mesh: creates a shape object made of points from the mesh. introduced in version 0.19
- Convert to solid: Converts a shape object to a solid object.
- Reverse shapes: Flips the normals of all faces of the selected object.
- Create a copy:
- Create simple copy: Creates a simple copy of the selected object.
- Create transformed copy: creates a transformed copy of the selected object. introduced in version 0.19
- Create shape element copy: creates a copy from an element (vertex, edge, face) of the selected object. introduced in version 0.19
- Refine shape: Cleans faces by removing unnecessary lines.
- Check geometry: Checks the geometry of selected objects for errors.
- Appearance: determines appearance of the whole part (color transparency etc.).
- Set colors: assigns colors to part faces.
Preferences
- Preferences: preferences available for Part Tools (the Part workbench also uses the PartDesign Preferences).
- Import Export Preferences: preferences available for importing from and exporting to different file formats.
- Fine-tuning: some extra parameters to fine-tune Part behavior.
Skript
See Part scripting.
Tutorials
- Import from STL or OBJ : How to import STL/OBJ files in FreeCAD
- Export to STL or OBJ : How to export STL/OBJ files from FreeCAD
- Whiffle Ball tutorial : How to use the Part Module
- Primitives: Box, Cylinder, Sphere, Cone, Torus, Tube, Create primitives, Shape builder
- Creation and modification: Extrude, Revolve, Mirror, Fillet, Chamfer, Make face from wires, Ruled Surface, Loft, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Thickness, Projection on surface, Attachment
- Boolean: Make compound, Explode Compound, Compound Filter, Boolean, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Measure: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub