Part Cut

From FreeCAD Documentation
This page is a translated version of the page Part Cut and the translation is 8% complete.
Outdated translations are marked like this.

Part Cut

Part → Cut
Standard genväg
Introducerad i version
Se även
Union, Common

Klipper (subtraherar) valda Del objekt, där den sista subtraheras från den första. Denna operation är helt parametrisk, så de ingående komponenterna kan förändras och resultatet beräknas om.

Cuts (subtracts) selected Part objects, the last one being subtracted from the first one. This operation is fully parametric and the components can be modified and the result recomputed.

Note: This command is an automated form of the Boolean operation.



  1. Select two shapes
  2. Invoke the Part Cut command several ways:
    • Press the Cut button in the Part toolbar
    • Use the Part → Boolean → Cut entry from the Part menu

Supported inputs

Input objects must be OpenCASCADE shapes. For example objects made with the Part, PartDesign or Sketcher workbenches. For meshes there are dedicated Boolean tools in Mesh Workbench.