Entornos de trabajo externos

From FreeCAD Documentation
Revision as of 20:18, 15 January 2021 by Maker (talk | contribs) (Created page with "|- | |[https://github.com/triplus/CubeMenu CubeMenu] |Personalización |El menú del cubo de navegación de FreeCAD proporciona la capacidad de manejar la estructura del menú...")

Introducción

Ambientes de trabajo externos son aquellos creados por usuarios poderosos que no han sido integrados en el código fuente principal de FreeCAD.

Estos ambientes de trabajo no están respaldados por el equipo de desarrollo del núcleo de FreeCAD, por lo que no se ha probado que funcionen con todas las versiones de FreeCAD. Las preguntas, informes de errores y solicitudes de mejora deben hacerse directamente a los autores del ambientes de trabajo en particular.

Ambientes de trabajo pueden ser instalados desde el Administrador de complementos (menú Herramientas → Administrador de complementos). Para la instalación manual ver Instalar más Ambientes de trabajo. Si hay instrucciones específicas o requisitos previos para el uso de estos Ambientes de trabajo, deben ser anotados en la página principal de cada Ambiente de trabajo.

Los ambientes de trabajo marcados con no se recomiendan para las versiones recientes de FreeCAD. Están obsoletos, sin mantenimiento, reemplazados por un nuevo banco de trabajo, o quizás no funcionan con Python 3 o con Qt5. En la mayoría de los casos deberían evitarse.

Ambiente de trabajo ensamble

A partir de FreeCAD 0.19 no hay ningún ambiente de trabajo oficial para la asamblea. Sin embargo, se han creado o están en desarrollo varias herramientas externas para manipular objetos para producir ensamblajes.

Tenga en cuenta que los ambientes de trabajo de montaje son generalmente incompatibles entre sí. Si se crea un montaje con uno de ellos, se debe se adhieran al ambiente de trabajo original, y no usen otro ambiente de trabajo de montaje en el mismo documento.

También hay ambientes de trabajo de "pseudo-ensamblaje" que en realidad no usan restricciones para mantener las relaciones entre las partes, sino que simplemente las re-posicionan en el espacio.

Vista general

La tabla que figura a continuación está organizada por temas, pero puede reordenarse haciendo clic en cualquiera de los encabezados de las columnas.

Icono Nombre Topic Descripción Autor Código
ArchTextures Arquitectura y construcción te permite añadir texturas básicas no fotorrealistas a los objetos arquitectónicos creados con el Arch ambiente de trabajo. furti https://github.com/furti/FreeCAD-ArchTextures
BCFPlugin Arquitectura y construcción Tiene como objetivo apoyar el Formato de Colaboración BIM (BCF). podestplatz https://github.com/podestplatz/BCF-Plugin-FreeCAD
BIM Arquitectura y construcción Tiene como objetivo implementar un completo flujo de trabajo de modelado de información de construcción (BIM) en FreeCAD. Extiende el Arch ambiente de trabajo, y reúne las herramientas de otros ambientes de trabajo para proporcionar un entorno que sea conveniente para modelar edificios, y trabajar con archivos IFC. yorikvanhavre https://github.com/yorikvanhavre/BIM_Workbench
BIMBots Arquitectura y construcción Le permite subir un modelo FreeCAD o partes seleccionadas de un modelo FreeCAD a una instancia BIMBots (normalmente un BIMServer con servicios externos habilitados), y realizar diferentes servicios y análisis en su modelo, y leer los resultados en FreeCAD, normalmente bajo la forma de un informe de texto, o un archivo BCF. BIMBots https://github.com/opensourceBIM/BIMbots-FreeCAD
Dodo Arquitectura y construcción Proporciona herramientas para crear marcos (cerchas, vigas) y tuberías (tubos, codos, bridas), y consulta esos objetos.

Esta es la nueva versión de Flamingo, destinada a Python 3 y Qt5.

oddtopus https://github.com/oddtopus/dodo
Flamingo Arquitectura y construcción Proporciona herramientas para crear marcos (cerchas, vigas) y tuberías (tubos, codos, bridas), y consulta esos objetos.

Esta es la versión antigua de Dodo, destinada a Python 2 y Qt4. Deberías preferir Dodo para los nuevos modelos.

oddtopus https://github.com/oddtopus/flamingo
GeoData Arquitectura y construcción Proporciona una herramienta para importar información geográfica de un punto dado de la Tierra por su latitud y longitud, de OpenStreetMap, Google Maps, Bing Map, o Here Map. microelly2 https://github.com/microelly2/geodata
Geomatics Arquitectura y construcción Está parcialmente basado en el Banco de Trabajo de GeoDatos. Proporciona funcionalidad específica para la geomática o la ingeniería topográfica, incluyendo la importación de archivos de puntos, la creación de superficies, la creación de contornos y la creación de secciones. Esto es parcialmente migrado al ambiente de trabajo de Trails. HakanSeven12 https://github.com/HakanSeven12/FreeCAD-Geomatics-Workbench
OSE Piping Arquitectura y construcción Crear diferentes accesorios de tubería. Soporta Ambiente de trabajo Flamingo. Ruslan https://github.com/rkrenzler/ose-piping-workbench
Reinforcement Arquitectura y construcción Proporciona herramientas para la generación de refuerzos y detalles. Este banco de trabajo proporciona una interfaz y preajustes para la creación de tipos de barras de refuerzo comunes. Y herramientas para generar listas de materiales de barras de refuerzo, lista de corte de formas de barras, programa de flexión de barras, y dibujo y dimensiones de las barras de refuerzo. amrit3701 https://github.com/amrit3701/FreeCAD-Reinforcement
SteelColumn Arquitectura y construcción Proporciona herramientas para crear complejas columnas de acero ensambladas a partir de perfiles y placas de IPE. ebrahimraeyat https://github.com/ebrahimraeyat/momen
Timber Arquitectura y construcción proporciona herramientas para facilitar el diseño y el modelado de marcos de madera y paredes estructurales. Este ambiente de trabajo ya no es desarrollado ni mantenido por su autor. j-wiedemann https://github.com/j-wiedemann/FreeCAD-Timber
Marco de madera Arquitectura y construcción Proporciona herramientas para facilitar el diseño y el modelado de marcos de madera y paredes estructurales, así como listas de corte para las vigas. JeromeL63 https://github.com/JeromeL63/Wood-Frame
Trails Arquitectura y construcción Proporciona una funcionalidad específica para la ingeniería de transporte (carreteras y ferrocarriles). Incluye componentes para realizar análisis de curvatura. joelgraff https://github.com/joelgraff/freecad.trails
A2plus Ensamblaje proporciona herramientas para crear ensamblajes de varias partes. Es una bifurcación y extensión del antiguo Ambiente de trabajo ensamblaje 2, pero no es compatible con él. kbwbe https://github.com/kbwbe/A2plus
Assembly2 Ensamblaje proporciona herramientas para crear ensamblajes de varias partes. No se mantiene desde 2016. Considera usar A2plus en su lugar. hamish2014 https://github.com/hamish2014/FreeCAD_assembly2
Assembly3 Ensamblaje Se utiliza para realizar el ensamblaje de diferentes cuerpos contenidos en un solo archivo o en varios documentos. Era un banco de pruebas para el objeto App Link que finalmente se incluyó en el código maestro. Es la solución más compleja y soporta cosas como la cinemática interactiva. realthunder https://github.com/realthunder/FreeCAD_assembly3
Assembly4 Ensamblaje es una solución basada en el mejorado expresión engine y el objeto App Link desarrollado en la rama de Assembly3. Assembly4 no funciona con un solucionador de restricciones adecuado, sino que utiliza el motor de expresión para posicionar los cuerpos con respecto a los sistemas de coordenadas locales (LCS). Zolko https://github.com/Zolko-123/FreeCAD_Assembly4
Autoload Personalización... Es una pequeña extensión que permite seleccionar los ambientes de trabajo que deben ser cargados cuando se inicia FreeCAD. Se puede utilizar en combinación con otras extensiones del mismo autor como CommandPanel, PieMenu y Shortcuts. triplus https://github.com/triplus/Autoload
CommandPanel Personalización Es una extensión que proporciona un panel que puede ser usado para almacenar herramientas de diferentes ambientes de trabajo. triplus https://github.com/triplus/CommandPanel
CubeMenu Personalización El menú del cubo de navegación de FreeCAD proporciona la capacidad de manejar la estructura del menú del cubo de navegación de FreeCAD y su apariencia general. triplus https://github.com/triplus/CubeMenu
Glass Customization It is an extension that shows the combo view (tree view and property editor) as a transparent overlay over the 3D view. triplus https://github.com/triplus/Glass
IconThemes Customization It is an extension that provides the ability of changing the icons of the default program. Icon sets aren't provided with this extension; these need to be provided separately. triplus https://github.com/triplus/IconThemes
Launcher Customization It is a small extension that provides a dedicated dialog box to search and launch commands. Instead of clicking on a toolbar button or menu entry, this method of executing commands may be faster for some users. triplus https://github.com/triplus/Launcher
ModernUI Customization Replaces the standard user interface (UI) with feature such as ribbon menus and collapsing/expanding panels on mouse-over. HakanSeven12 https://github.com/HakanSeven12/Modern-UI
NavigationIndicator Customization It is an extension that adds an indicator for the mouse navigation style in the status bar. Since FreeCAD 0.17 this extension is obsolete, as the indicator is included natively in FreeCAD. triplus https://github.com/triplus/NavigationIndicator
PersistentToolbars Customization It is a small extension to keep the toolbars in their locations. Since FreeCAD 0.17 this extension is obsolete, as the functionality is included natively in FreeCAD. triplus https://github.com/triplus/PersistentToolbars
PieMenu Customization It is a small extension that shows a pie menu to select tools or commands when the Tab key is pressed. A pie menu is an interface that appears in Blender and other systems like Android mobile phones to launch commands. triplus https://github.com/triplus/PieMenu
Pluginloader Customization It is a small extension that allows the user to install macros, external workbenches, and other extensions in FreeCAD. Since FreeCAD 0.17 this utility is obsolete, as this functionality is already provided by the Addon Manager. microelly2 https://github.com/microelly2/freecad-pluginloader
RemBench Customization It is a small extension that remembers and automatically activates a workbench based on the document tab that is selected. triplus https://github.com/triplus/RemBench
SelectorToolbar Customization It is a small extension that provides a point and click experience for switching workbenches. triplus https://github.com/triplus/SelectorToolbar
ShortCuts Customization It is a small extension that provides a manager and overlay for shortcuts. triplus https://github.com/triplus/ShortCuts
TabBar Customization It is a small extension that adds a window with tabs in order to select workbenches. triplus https://github.com/triplus/TabBar
ToolbarStyle Customization It is a small extension that allows the configuration of toolbars, with icons, text, or both. triplus https://github.com/triplus/ToolbarStyle
MOOC Education It provides an interactive tutorial to learn about FreeCAD directly inside the program. It allows you to evaluate your self-learning. rockn https://framagit.org/freecad-france/mooc-workbench
AirPlaneDesign Engineering It is an experimental workbench to design wings and airplane objects. FredsFactory (a179308) https://github.com/FredsFactory/FreeCAD_AirPlaneDesign
FreeCADTools Engineering It contains tools to create metal profiles, square tubing, z profile, palette, rotation, drawing, and more. Siardeni https://github.com/Siardeni/FreeCADTools
Glider Engineering It contains tools to design paragliders and kites using the OpenGlider library. booya https://github.com/booya-at/OpenGlider
GDML Engineering It contains tools to handle the Geometry Definition Markup Language (GDML). KeithSloan https://github.com/KeithSloan/GDML
GDT Engineering It is a collection of tools to add geometric dimensioning and tolerancing (GDT) labels in 2D and 3D technical drawings. It implements the standard ISO 16792. juanvanyo https://github.com/juanvanyo/FreeCAD-GDT
KicadStepUp Engineering It is aimed at helping both KiCad and FreeCAD users in collaborating with electrical (ECAD) and mechanical (MCAD) design. With FreeCAD it's possible to design a printed circuit board, and push it to KiCad; alternatively, the board can be designed in KiCad, it can be imported by FreeCAD, it can be edited with the Sketcher Workbench, and pushed back into KiCad. The 3D model, boards and enclosure, can be exported to VRML with materials properties for use in KiCad or Blender. easyw https://github.com/easyw/kicadStepUpMod
LCInterlocking Engineering It contains tools to create interlocking parts that can be cut with laser-cutters. Tabs and hinges can be added, and the sketch can be exported to SVG. execuc https://github.com/execuc/LCInterlocking
Maker Workbench Engineering The Maker Workbench is composed of a mechatronic components system and an optic components system. The user can modify these components to customize their own system. David Muñoz https://github.com/URJCMakerGroup/MakerWorkbench
Pyrate Engineering It is used to design optical lenses. The project aims to provide an optical raytracer for isotropic, homogeneous anisotropic and inhomogeneous isotropic GRIN media. mess42, joha2 https://github.com/mess42/pyrate
SheetMetal Engineering It provides tools to design an object made of a folded sheet, such as a metal case or enclosure. The user starts with a flat sheet, then uses tools to extrude and bend the faces of the object until the desired shape is obtained. The body may then be unfolded to obtain the required flat material, and to use as input for mills or laser cutting machines. Shai Seger and Ulrich Brammer https://github.com/shaise/FreeCAD_SheetMetal
Ship Engineering It is used to create structures that are common to ships. It currently is seeking a maintainer. Jose Luis Cercós Pita https://github.com/FreeCAD/freecad.ship
OSE 3D Printer Engineering A workbench for designing 3D printers by Open Source Ecology for Distributive Enterprise. G Roques https://github.com/gbroques/ose-3d-printer-workbench
CADExchanger Information and data It is an extension that allows FreeCAD to import and export file formats supported by the commercial "CAD Exchanger" application, such as Rhino 3dm or ACIS sat, and mesh formats like OBJ and STL. yorikvanhavre https://github.com/yorikvanhavre/CADExchanger
dxf_library Information and data It installs the DXF Python importer and exporter. This was required in FreeCAD versions v0.15 and below. This is not needed anymore when using the built-in DXF importer in v0.16 and above. This library is still needed if you wish to explicitly use the Python importer, or if you wish to export directly from the 3D model. Please notice that the built-in importer is faster than the Python importer, but in many cases the Python importer produces better results. yorikvanhavre https://github.com/yorikvanhavre/Draft-dxf-importer
DynamicData Information and data It is an extension that allows creating container objects to hold custom properties of any type that FreeCAD supports, for example, length or placement. These custom properties can then be used in mathematical expressions just like other properties in the Sketcher Workbench or Spreadsheet Workbench. mwganson https://github.com/mwganson/DynamicData
InventorLoader Information and data It is an extension designed to import Autodesk Inventor files. Currently only Parts (IPT) can be displayed, not assemblies (IAM) nor drawings (IDW). As Inventor files contain a complete ACIS model representation, SAT and SAB files can also be imported. Export will not be supported, neither to IPT nor to SAT. jmplonka https://github.com/jmplonka/InventorLoader
ImportNURBS Information and data A workbench to add support for importing 3dm files using open rhino3dm library Noteː This workbench is still under development keithsloan52 https://github.com/KeithSloan/ImportNURBS
File:Plot workbench icon.svg Plot Information and data It is a layer on top of the Matplotlib Python module to graph mathematical functions and vectors of points. Jose Luis Cercós Pita https://github.com/FreeCAD/freecad.plot
Reporting Information and data It adds tools to extract information from a FreeCAD document using SQL statements, and show the results in a spreadsheet. The SQL statements can be used from a graphical user interface or from Python scripts. It works in a similar way to the Arch Schedule tool but is more powerful due to the flexibility that SQL provides. furti https://github.com/furti/FreeCAD-Reporting
WebTools Information and data It contains a series of tools to communicate with web services like Git, a BIM server, and Sketchfab. yorikvanhavre https://github.com/yorikvanhavre/WebTools
YAML Information and data It is an extension that adds an importer to load and manipulate objects from YAML files. In this way it's easier to design and check 3D parts before manufacturing. Mambix https://github.com/Mambix/FreeCAD-yaml-workspace
3DfindIT Parts 3DfindIT.com, the engineering search engine for 3D components from CADENAS, provides users with easy access to millions of CAD models from thousands of international manufacturers and a range of intuitive search methods. tsielaff, berndhahnebach https://github.com/cadenasgmbh/3dfindit-freecad-integration
BOLTSFC Parts It is an extension that allows you to use the BOLTS "Open Library for Technical Specifications", which is a collection of objects like nuts, screws, bolts, and so on, parametrically defined. jreinhardt, berndhahnebach https://github.com/berndhahnebach/BOLTSFC
CadQuery Parts It allows users to design parametric 3D CAD models defined by the CadQuery CAD scripting API. It includes a full-featured editor with auto-completion, syntax highlighting, line numbering, and code folding. Example scripts are included. Script variables can be edited dynamically through the use of a parameter dialog. This workbench also includes cqparts, which is a library that adds support for parts and assemblies with constraints on top of CadQuery. jmwright https://github.com/jmwright/cadquery-freecad-module
Fasteners Workbench Parts It is a workbench that provides various fasteners, screws, bolts, nuts, etc., to attach to your model complying with ISO standards. Ulrich Bramar (@ulrich1a) and Shai Seger (@shais) https://github.com/shaise/FreeCAD_FastenersWB
FCGear Parts It is an extension that adds many different gears like cylindric involute, involute rack, cylindric cycloid, spherical involute bevel-gear, and crown gear. looooo https://github.com/looooo/freecad.gears
Frametools Parts It is an extension with tools to create frames and beams, including two intersecting beams, in which one beam is cut by a plane or by another beam. looooo https://github.com/looooo/freecad.frametools
Parts Library Parts It is an extension that downloads a library of parts in STEP format .step or in FreeCAD format .FCStd that can be imported into a document. Users can contribute content to this library by forking the repository, adding their own parts under a permissive CC-BY 3.0 license, and submitting a pull request to merge the new objects. Community https://github.com/FreeCAD/FreeCAD-library
PCB Parts It is a workbench that allows the user to import and create printed circuit boards (PCB) in FreeCAD. It supports layers, colors, transparencies, importing Step and Iges models, and displaying holes and vias. marmni https://github.com/marmni/FreeCAD-PCB
Retr3d Parts It is a framework designed to model and manufacture 3D printable parts starting from electronic waste. The intention of this project is to recycle e-waste, and promote 3D printing, especially in developing economies. Maaphoo https://github.com/Maaphoo/Retr3d
Symbols Library Parts It is an extension that downloads a library of SVG symbols that can be used in FreeCAD, particularly in the TechDraw Workbench to produce technical documentation. Users can contribute content to this library by forking the repository, adding their own symbols under a permissive CC-BY 3.0 license, and submitting a pull request to merge the new objects. Community https://github.com/FreeCAD/FreeCAD-symbols
ThreadProfile Parts It provides tools to create parametric 2D thread profiles compatible with extrusion tools in Part and PartDesign workbenches. mwganson https://github.com/mwganson/ThreadProfile
Pivy_trackers Programming Pivy_trackers provides a Python developer with an easy way to directly manipulate the Coin3D scenegraph by generating specific scenegraph node structures which are then inserted and accessed though the pivy_tracker classes. joelgraff https://github.com/joelgraff/pivy_trackers
Animation Pseudo-assembly It contains many tools to simulate movement of parts, create sequences of pictures, and thus produce an animation. The position and rotation of objects can be changed at different times, but also other properties like visibility, transparency, shape color, and camera position. microelly2 https://github.com/microelly2/Animation
ExplodedAssembly Pseudo-assembly It allows creating exploded views and animations of assemblies. It was previously known as "ExplodedAnimation". JMG1 https://github.com/JMG1/ExplodedAssembly
Lattice2 Pseudo-assembly It provides tools for working with placements and arrays of placements. It is a sort of assembly workbench but there are no constraints nor relationships. Instead, the workbench focuses in arrays of placements that can be generated, combined, transformed, superimposed, and populated with shapes. It can also create exploded assemblies. DeepSOIC https://github.com/DeepSOIC/Lattice2
Manipulator Pseudo-assembly It is aimed at helping users in aligning, moving, rotating, and measuring 3D objects through a friendly graphical interface. easyw https://github.com/easyw/Manipulator
Part-o-magic Pseudo-assembly It is an experimental workbench that provides some improvements to Std Part and PartDesign Body containers (automatic grouping, visibility automation, etc.), in order to work with documents that have multiple parts with deep feature hierarchies. It provides a Body-like container for the Part Workbench, and for other workbenches that produce solid shapes. Part-o-magic does not provide assembly constraints, but the tools included may be useful in conjunction with a true assembly workbench. DeepSOIC https://github.com/DeepSOIC/Part-o-magic
Workfeature Pseudo-assembly It provides tools to produce different points, axes, and planes, in order to facilitate the creation of assemblies. This workbench is based on the older Workfeatures macro, which was hosted in the macros recipes page. Currently, the macro has a bit more functionality than the workbench, but eventually the workbench will integrate all existing tools of the macro. They also differ in the graphical user interface; the macro creates a panel next to the tree view and the task panel, while the workbench provides its tools in toolbars, just like other workbenches. Rentlau https://github.com/Rentlau/WorkFeature-WB
Kerkythea Rendering It adds a simple exporter to produce XML files for use with the Kerkythea freeware renderer. marmni https://github.com/marmni/FreeCAD-Kerkythea/blob/master/exportToKerkythea.FCMacro
POV-Ray-Rendering Rendering It creates renderings of your FreeCAD model and is very easy to use but also offers all options for advanced users. The_Raytracers https://github.com/TheRaytracers/freecad-povray-render
Render Rendering It can produce high-quality rendered images, using open-source external rendering engines like Pov-ray, Luxrender, and Appleseed. Render is a replacement for the Raytracing Workbench, and uses the same templates so they are compatible. In the future Render may also support Kerkythea, Blender's EEVEE, and OpenCascade's CadRays engines. yorikvanhavre https://github.com/FreeCAD/FreeCAD-render
3D Printing Tools Shapes It has tools to do small changes to meshes imported from external files like STL. mark1791 https://github.com/mark1791/3D_Printing_Tools
Cura Engine Shapes It is an extension that integrates CuraEngine into FreeCAD in order to facilitate gcode generation for 3D printing. This addon is unmaintained since 2014 and no longer works with recent versions of CuraEngine. cblt2l https://github.com/cblt2l/FreeCAD-CuraEngine-Plugin
CurvedShapes Shapes It has tools to create 3D curves from 2D profiles chbergmann https://github.com/chbergmann/CurvedShapesWorkbench
Curves Shapes It is a collection of tools to create and edit NURBS curves and surfaces. tomate44 (Chris_G) https://github.com/tomate44/CurvesWB
Defeaturing Shapes It provides tools to edit STEP objects to remove features like holes, faces, and edges, and perform some operations with the simplified objects. easyw https://github.com/easyw/Defeaturing_WB
Drawing Dimensioning Shapes It adds dimensioning and annotation tools to the Drawing Workbench. It is deprecated since FreeCAD 0.17. Consider using TechDraw Workbench instead. hamish2014 https://github.com/hamish2014/FreeCAD_drawing_dimensioning
Lithophane Shapes It is an extension to convert a provided image to a "lithophane" for 3D printing. A lithophane is an image that can only be seen properly when illuminated from behind. furti https://github.com/furti/FreeCAD-Lithophane
MeshRemodel Shapes It provides tools to help re-create or re-model imported mesh objects to obtain a solid shape. The workflow is to create points from the mesh's vertices, and use those to create sketches, which can then be extruded. mwganson https://github.com/mwganson/MeshRemodel
Nurbs Shapes It is a collection of scripts for managing freeform surfaces and curves. microelly2 https://github.com/microelly2/freecad-nurbs
Pyramids and Polyhedrons Workbench Shapes It has tools for generating pyramids, regular polyhedra and geodesic speres, fully scalable and usable like regular bodies. eddyverl https://github.com/eddyverl/FreeCAD-Pyramids-and-Polyhedrons
Reconstruction Shapes It provides utilities to reconstruct models from images. microelly2 https://github.com/microelly2/reconstruction
Silk Shapes It is a collection of NURBS surface modeling tools focused on low degree and seam continuity. Silk is the new name of the NURBSlib-EVM project. edwardvmills https://github.com/edwardvmills/Silk
Slic3r-tools Shapes It allows exporting parts, and opening the resulting STL in Slic3r. You can set up a default print profile, and directly get information about the resources that would be used to 3D print it, as well as quickly generate the .gcode file. limikael https://github.com/limikael/freecad-slic3r-tools
SlopedPlanesMacro Shapes It allows you to build figures controlling the slopes of the faces of objects. Damian Caceres Moreno https://github.com/luzpaz/SlopedPlanesMacro
Cfd Simulation It provides a graphical interface to the OpenFOAM solver to perform computational fluid dynamics (CFD) simulations. qingfengxia https://github.com/qingfengxia/Cfd
CfdOF Simulation It is a fork of the Cfd workbench that focuses on ease of use; it is intended for people who are just starting in the world of CFD and OpenFOAM. jaheyns https://github.com/jaheyns/CfdOF
DesignSPHysics Simulation It provides a graphical user interface to DualSPHysics, a fluid dynamics solver using the smoothed particle hydrodynamics (SPH) model. ndrs92 https://github.com/DualSPHysics/DesignSPHysics
EM Simulation It provides a graphical interface for different solvers by FastFieldSolvers. At present it supports the 3D magneto-quasistatic impedance solver FastHenry. Support for the 3D electrostatic capacitance solver FasterCap is ongoing. FastFieldSolvers S.R.L. https://github.com/ediloren/EM-Workbench-for-FreeCAD

Traduciendo ambientes de trabajo externos

See the wiki page for more information Translating an external workbench