Part Kugel
Part Kugel |
Menüeintrag |
---|
Part → Grundkörper → Kugel |
Arbeitsbereich |
Part |
Standardtastenkürzel |
Keiner |
Eingeführt in Version |
- |
Siehe auch |
Part Grundelemente |
Beschreibung
Der Befehl Part Kugel erstellt einen parametrischen Volumenkörper, eine Kugel. Sie ist das Ergebnis der Drehung eines Kreisbogens um eine Achse. Im Koordinatensystem durch ihre Daten-EigenschaftPlacement festgelegt, liegt ihr Mittelpunkt im Ursprung und Ihre Drehachse ist die Z-Achse.
A Part Sphere can be truncated at the top and/or bottom by changing its DatenAngle1 and/or DatenAngle2 properties. It can be turned into a segment of a sphere by changing its DatenAngle3 property.
Anwendung
Anwendung
Klicke im Arbeitsbereich Part auf das Kugelsymbol . Die Kugel wird bei der Erstellung am Ursprung (Punkt 0,0,0) positioniert. Die Winkelparameter erlauben es, einen Teil der Kugel statt einer Vollkugel zu erstellen (sie sind standardmäßig auf 360° eingestellt).
Example
A Part Sphere object created with the scripting example below is shown here.
Notes
- A Part Sphere can also be created with the Part Primitives command. With that command you can specify the dimensions and placement at creation time.
Optionen
See also: Property editor.
A Part Sphere object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:
Daten
Attachment
The object has the same attachment properties as a Part Part2DObject.
Kugel
- DatenRadius (
Length
): The radius of the sphere. The default is5mm
. - DatenAngle1 (
Angle
): The start angle of the circular arc profile of the sphere. Valid range:-90° <= value <= 90°
. May not be equal to DatenAngle2. The default is-90°
. - DatenAngle2 (
Angle
): The end angle of the circular arc profile of the sphere. Valid range:-90° <= value <= 90°
. May not be equal to DatenAngle1. The default is90°
. If the total angle of the arc profile is smaller than180°
the sphere will be truncated and have a flat face at the top and/or bottom. - DatenAngle3 (
Angle
): The total angle of revolution of the sphere. Valid range:0° < value <= 360°
. The default is360°
. If it is smaller than360°
the resulting solid will be a segment of a sphere.
Scripting
See also: Autogenerated API documentation, Part scripting and FreeCAD Scripting Basics.
A Part Sphere can be created with the addObject()
method of the document:
sphere = FreeCAD.ActiveDocument.addObject("Part::Sphere", "mySphere")
- Where
"mySphere"
is the name for the object. - The function returns the newly created object.
Example:
import FreeCAD as App
doc = App.activeDocument()
sphere = doc.addObject("Part::Sphere", "mySphere")
sphere.Radius = 20
sphere.Angle1 = -30
sphere.Angle2 = 45
sphere.Angle3 = 90
sphere.Placement = App.Placement(App.Vector(3, 9, 11), App.Rotation(75, 60, 30))
doc.recompute()
- Grundkörper: Würfel, Kegel, Zylinder, Kugel, Torus, Grundkörper, Shapebuilder
- Objekte ändern: Boolesche Operationen, Vereinigung, Schnitt, Ausschneiden, Join features, Connect, Embed, Cutout
- Aufteilungswerkzeuge: Boolesche Fragmente, Slice a part, Slice, XOR, Part Defeaturing
- Verbund: Erzeuge Verbund, Verbund auflösen, Compound Filter; Extrudieren, Kanten abrunden, Drehen, Schnitt, Schnitte..., Abschrägen, Spiegelung, Ruled Surface, Sweep, Loft
- Offset-Werkzeuge: 3D Offset, 2D Offset, Dicke, Projection on surface
- Erste Schritte
- Installation: Herunterladen, Windows, Linux, Mac, Zusätzlicher Komponenten, Docker, AppImage, Ubuntu Snap
- Grundlagen: Über FreeCAD, Graphische Oberfläche, Mausbedienung, Auswahlmethoden, Objektname, Programmeinstellungen, Arbeitsbereiche, Dokumentstruktur, Objekteigenschaften, Hilf FreeCAD, Spende
- Hilfe: Tutorien, Video Tutorien
- Arbeitsbereiche: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework