Сфера
Сфера |
Системное название |
---|
Part_Sphere |
Расположение в меню |
Деталь → Примитивы → Сфера |
Верстаки |
Part(Деталь) |
Быстрые клавиши |
Нет |
Представлено в версии |
- |
См. также |
Создать примитивы |
Описание
Создаёт простую параметрическую сферу с параметрами положение (position), угол1(angle1), угол2(angle2), угол3(angle3) и радиус(radius).
A Part Sphere can be truncated at the top and/or bottom by changing its ДанныеAngle1 and/or ДанныеAngle2 properties. It can be turned into a segment of a sphere by changing its ДанныеAngle3 property.
Применение
- Переключитесь на верстак Part
- Существует несколько способов вызова команды:
Example
A Part Sphere object created with the scripting example below is shown here.
Notes
- A Part Sphere can also be created with the Part Primitives command. With that command you can specify the dimensions and placement at creation time.
Свойства
See also: Property editor.
A Part Sphere object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:
Данные
Attachment
The object has the same attachment properties as a Part Part2DObject.
Sphere
- ДанныеRadius (
Length
): The radius of the sphere. The default is5mm
. - ДанныеAngle1 (
Angle
): The start angle of the circular arc profile of the sphere. Valid range:-90° <= value <= 90°
. May not be equal to ДанныеAngle2. The default is-90°
. - ДанныеAngle2 (
Angle
): The end angle of the circular arc profile of the sphere. Valid range:-90° <= value <= 90°
. May not be equal to ДанныеAngle1. The default is90°
. If the total angle of the arc profile is smaller than180°
the sphere will be truncated and have a flat face at the top and/or bottom. - ДанныеAngle3 (
Angle
): The total angle of revolution of the sphere. Valid range:0° < value <= 360°
. The default is360°
. If it is smaller than360°
the resulting solid will be a segment of a sphere.
Scripting
See also: Autogenerated API documentation, Part scripting and FreeCAD Scripting Basics.
A Part Sphere can be created with the addObject()
method of the document:
sphere = FreeCAD.ActiveDocument.addObject("Part::Sphere", "mySphere")
- Where
"mySphere"
is the name for the object. - The function returns the newly created object.
Example:
import FreeCAD as App
doc = App.activeDocument()
sphere = doc.addObject("Part::Sphere", "mySphere")
sphere.Radius = 20
sphere.Angle1 = -30
sphere.Angle2 = 45
sphere.Angle3 = 90
sphere.Placement = App.Placement(App.Vector(3, 9, 11), App.Rotation(75, 60, 30))
doc.recompute()
- Примитивы: Куб(Параллелограмм), Конус, Цилиндр, Сфера, Тор, Полый цилиндр,Примитивы, Связующие формы
- Создание и правка: Выдавливание, Построение фигуры вращения, Отражение, Скругление, Фаска, Создать плоскость из граней, Ruled Surface, Профиль, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Создать полый объект, Projection on surface, Прикрепление
- Булевы операции: Соединить, Разорвать связь, Compound Filter, Булевы операции, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Измерительные: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web