Kreslení Obdélníku
Draft Rectangle |
Umístění Menu |
---|
Draft -> Rectangle |
Pracovní stoly |
Kreslení, Architecture |
Výchozí zástupce |
R E |
Představen ve verzi |
- |
Viz také |
Part Box |
Popis
Nástroj Obdélník vytváří obdélník zadáním dvou protějších bodů. Použije se tloušťka čáry a barva předem zadaná v záložce Nástrojů.
You can optionally add a 45 degree chamfer or circular fillet to every corner of the rectangle, and you can divide the rectangle into a series of equal-sized rows and columns.
Použití
- Stiskněte tlačítko Obdélník nebo klávesy R a potom E
- Klikněte na první roh ve 3D pohledu nebo zadejte souřadnice
- Klikněte na protější bod ve 3D pohledu nebo zadejte souřadnice. Obdélník je také povrchem, i když se jeví jako drátový model.
The rectangle can be edited by double clicking on the element in the tree view, or by pressing the Draft Edit button. Then you can move the points to a new position.
The length and width of the rectangle can be changed after creation by changing its properties.
Volby
- Stiskněte X, Y nebo Z po prvním bodu pro určení osy, ve které bude následuící bod.
- Pro zadání souřadnic ručně, jednoduše zadejte číslo a stiskněte ENTER mezi každou z komponent X, Y a Z.
- Stiskněte klávesu R nebo klikněte/odklikněte zaklikávací políčko Relativní. Je-li nastaven relativní mód jsou souřadnice následujícího bodu relativní k předchozímu bodu. Je-li mód absolutní souřadnice jsou vztaženy k počátečnímu bodu (0,0,0).
- Stiskněte klávesu T nebo klikněte/odklikněte zaklikávací políčko Pokračovat. Je-li nastaven pokračovací mód, nástroj Obdélník bude po ukončení obdélníku restartován a připraven ke kreslení dalšího obdélníku bez nutnosti znovu jej spouštět klikáním na tlačítko Obdélník.
- Stiskněte při kreslení klávesu CTRL pro přichycení Vašeho bodu k nejbližšímu uchopovacímu místu, nezávisle na vzdálenosti od něho.
- Stiskněte při kreslení klávesu SHIFT pro nastavení vazby Vašeho dalšího bodu vodorovně nebo svisle v relaci k předchozímu bodu.
- Stiskněte klávesu I nebo tlačítko Filled aby se obdélník zobrazoval jako plocha. To jednoduše nastavuje Pohled->Vlastnost Obdélníku na "Otevřené čáry" nebo "Drátový model", toto také může být snadno změněno později.
- Stiskněte klávesu ESC nebo tlačítko Cancel pro ukončení aktuálního příkazu Obdélník.
Vlastnosti
- ÚdajeDélka: Specifikuje délku obdélníku
- ÚdajeŠířka: Specifikuje šířku obdélníku
- ÚdajePoloměr zaoblení: Specifikuje poloměr zaoblení rohů obdélníku
- PohledTextura obrázku: Umožňuje zadat adresu souboru s obrázkem, který bude zobrazen na obdélníku. Je na Vás jestli dáte obdélníku stejné proporce jako má obrázek abyste se vyhnuli jeho zkreslení. Nevyplnění této vlastnosti obrázek odebere.
Data
- ÚdajeLength: specifies the length of the shape in the X axis direction.
- ÚdajeHeight: specifies the height of the shape in the Y axis direction.
- ÚdajeChamfer Size: specifies the diagonal length of the 45° chamfer at each corner of the rectangle.
- ÚdajeFillet Radius: specifies the radius of the 90° fillet at each corner of the rectangle.
- ÚdajeRows: specifies the number of equal-sized rows in which the original shape is divided; by default, 1 row.
- ÚdajeColumns: specifies the number of equal-sized columns in which the original shape is divided; by default, 1 column.
- ÚdajeMake Face: specifies if the shape makes a face or not. If it is
true
a face is created, otherwise only the perimeter is considered part of the object.
View
- PohledPattern: specifies a Draft Pattern with which to fill the face of the shape. This property only works if ÚdajeMake Face is
true
, and if PohledDisplay Mode is "Flat Lines". - PohledPattern Size: specifies the size of the Draft Pattern.
- PohledTexture Image: specifies the path to an image file to be mapped on the face of the shape. Blanking this property will remove the image.
- The rectangle should have the same proportions as the image to avoid distortions in the mapping.
Skriptování
Nástroj Obdélník může být využit v makrech a z konzoly Pythonu použitím následující funkce:
The Rectangle tool can be used in macros and from the Python console by using the following function:
Rectangle = makeRectangle(length, height, placement=None, face=None, support=None)
- Vytvoří objekt obdélník s délkou v ose X a výškou v ose Y.
- Je-li zadáno placement (umístění), je použito.
- Je-li facemode False, obdélník je zobrazen jako povrch, jinak jako drátový model.
- Je použita tloušťka čáry a barva čáry podle aktuálního nastavení.
- Výstupem je nově vytvořený objekt.
Příklad:
import FreeCAD, Draft
Rectangle1 = Draft.makeRectangle(4000, 1000)
Rectangle2 = Draft.makeRectangle(1000, 4000)
ZAxis = FreeCAD.Vector(0, 0, 1)
p3 = FreeCAD.Vector(1000, 1000, 0)
place3 = FreeCAD.Placement(p3, FreeCAD.Rotation(ZAxis, 45))
Rectangle3 = Draft.makeRectangle(3500, 250, placement=place3)
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub