Tutorials/zh-cn: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 147: Line 147:
! FreeCAD version
! FreeCAD version
! Example files
! Example files
! UnfinishedDocu


<!-- Template for new entries
<!-- Template for new entries
|-
|-
| [[Tutorial]]
| [[Tutorial|Tutorial]]
| Topic
| Topic
| Level
| Level
Line 158: Line 157:
| 1.0
| 1.0
| None
| None
| No
-->
-->


Line 169: Line 167:
|
|
|
|
| No


|-
|-
Line 179: Line 176:
|
|
|
|
| No


|-
|-
| [[Aeroplane]]
| [[Aeroplane|Aeroplane]]
| Part Workbench
| Part Workbench
| Beginner
| Beginner
Line 189: Line 185:
|
|
|
|
| No


|-
|-
| [[Analysis of reinforced concrete with FEM]]
| [[Analysis_of_reinforced_concrete_with_FEM|Analysis of reinforced concrete with FEM]]
| Reinforced concrete with FEM
| Reinforced concrete with FEM
| Intermediate
| Intermediate
| 1:00
| 1:00
| [[User:HarryvL | HarryvL]]
| [[User:HarryvL|HarryvL]]
| 0.19 or above
| 0.19 or above
|
|
| No


|-
|-
| [[Arch panel tutorial]]
| [[Arch_panel_tutorial|Arch panel tutorial]]
| Modeling an architectural panel
| Modeling an architectural panel
| Beginner
| Beginner
Line 209: Line 203:
|
|
|
|
| No


|-
|-
| [[Arch tutorial]]
| [[Arch_tutorial|Arch tutorial]]
| Modeling
| Modeling
| Intermediate
| Intermediate
|
|
| [[User:Yorik | Yorik]]
| [[User:Yorik|Yorik]]
| 0.14
| 0.14
|
|
| No


|-
|-
| [[Basic Attachment Tutorial]]
| [[Basic_Attachment_Tutorial|Basic Attachment Tutorial]]
| Sketch attachment
| Sketch attachment
| Beginner/intermediate
| Beginner/intermediate
| 01:00
| 01:00
| [[User:Bance | Bance]]
| [[User:Bance|Bance]]
| 0.17 and above
| 0.17 and above
| [https://github.com/BanceFC/Examples/blob/master/Basic_Attachment_Tutorial.FCStd Basic Attachment Tutorial.FCStd]
| [https://github.com/BanceFC/Examples/blob/master/Basic_Attachment_Tutorial.FCStd Basic Attachment Tutorial.FCStd]
| yes


|-
|-
| [[Basic modeling tutorial]]
| [[Basic_modeling_tutorial|Basic modeling tutorial]]
| Introduction to modelling
| Introduction to modelling
| Beginner
| Beginner
| 0:15
| 0:15
| [[User:NormandC | NormandC]]
| [[User:NormandC|NormandC]]
| Any
| Any
| None
| None
| No


|-
|-
| [[Basic_Part_Design_Tutorial | Basic Part Design Tutorial]]
| [[Basic_Part_Design_Tutorial|Basic Part Design Tutorial]]
| Modeling
| Modeling
| Beginner
| Beginner
|
|
| [[User:Quick61 | Mark Stephen (Quick61)]] and [[User:HarryGeier | HarryGeier]]
| [[User:Quick61|Mark Stephen (Quick61)]] and [[User:HarryGeier|HarryGeier]]
| 0.17 or above
| 0.17 or above
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17]
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17]
| No


|-
|-
| [[Basic Sketcher Tutorial]]
| [[Basic_Sketcher_Tutorial|Basic Sketcher Tutorial]]
| Sketcher
| Sketcher
| Beginner
| Beginner
| 1:00
| 1:00
| [[User:Drei | Drei]] and [[User:Vocx | Vocx]]
| [[User:Drei|Drei]] and [[User:Vocx|Vocx]]
| 0.19
| 0.19
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43594 Basic Sketcher tutorial ]
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43594 Basic Sketcher tutorial ]
| No


|-
|-
| [[Basic TechDraw Tutorial]]
| [[Basic_TechDraw_Tutorial|Basic TechDraw Tutorial]]
| TechDraw Workbench
| TechDraw Workbench
| Beginner
| Beginner
|
|
| [[User:WandererFan | WandererFan]]
| [[User:WandererFan|WandererFan]]
| 0.17 and above
| 0.17 and above
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17 Sample] [https://github.com/FreeCAD/Examples/blob/master/Basic_TechDraw_Tutorial_Example_Files/Basic_TechDraw_Tutorial.fcstd Basic TechDraw Tutorial Sample]
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17 Sample] [https://github.com/FreeCAD/Examples/blob/master/Basic_TechDraw_Tutorial_Example_Files/Basic_TechDraw_Tutorial.fcstd Basic TechDraw Tutorial Sample]
| No


|-
|-
| [[Code snippets]]
| [[Code_snippets|Code snippets]]
| Python
| Python
| Beginner
| Beginner
Line 279: Line 266:
|
|
|
|
| No


|-
|-
| [[Creating a simple part with PartDesign]]
| [[Creating_a_simple_part_with_PartDesign|Creating a simple part with PartDesign]]
| Modeling
| Modeling
| Beginner
| Beginner
Line 289: Line 275:
| 0.17 or above
| 0.17 or above
| [https://github.com/FreeCAD/Examples/blob/master/Creating_a_simple_PartDesign_Body.FCStd Creating a simple PartDesign Body.FCStd]
| [https://github.com/FreeCAD/Examples/blob/master/Creating_a_simple_PartDesign_Body.FCStd Creating a simple PartDesign Body.FCStd]
| No


|-
|-
| [[Customize Toolbars]]
| [[Customize_Toolbars|Customize Toolbars]]
|
|
| Beginner
| Beginner
| 0:05
| 0:05
| [[User:Mario52 | Mario52]]
| [[User:Mario52|Mario52]]
| Any
| Any
| None
| None
| No


|-
|-
| [[Draft ShapeString tutorial]]
| [[Draft_ShapeString_tutorial|Draft ShapeString tutorial]]
| Product Design
| Product Design
| Beginner
| Beginner
Line 309: Line 293:
| 0.17 and above
| 0.17 and above
| [https://github.com/FreeCAD/Examples/blob/master/Draft_Shapestring_Tutorial_Examples/Draft_Shapestring_Tutorial_Text.FCStd?raw=true Draft_Shapestring_Text]
| [https://github.com/FreeCAD/Examples/blob/master/Draft_Shapestring_Tutorial_Examples/Draft_Shapestring_Tutorial_Text.FCStd?raw=true Draft_Shapestring_Text]
| No


|-
|-
| [[Draft tutorial]]
| [[Draft_tutorial|Draft tutorial]]
| Drafting
| Drafting
| Beginner
| Beginner
| 0:30
| 0:30
| [[User:Drei | Drei]] and vocx
| [[User:Drei|Drei]] and vocx
| 0.19
| 0.19
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43651 Draft tutorial updated]
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43651 Draft tutorial updated]
| No


|-
|-
Line 326: Line 308:
| Intermediate
| Intermediate
| 1:00
| 1:00
| [[User:Quick61 | Mark Stephen (Quick61)]]
| [[User:Quick61|Mark Stephen (Quick61)]]
| 0.14.3700 or above
| 0.14.3700 or above
| None
| None
| No


|-
|-
| [[Drawing tutorial | Drawing tutorial (obsolete)]]
| [[Drawing_tutorial|Drawing tutorial (obsolete)]]
| Blueprints / Drawings
| Blueprints / Drawings
| Beginner
| Beginner
| 0:15
| 0:15
| [[User:Drei | Drei]]
| [[User:Drei|Drei]]
| 0.16 or above
| 0.16 or above
|
|
| No


|-
|-
| [[Dxf Importer Install]]
| [[Dxf_Importer_Install|Dxf Importer Install]]
|
|
| Intermediate
| Intermediate
| 0:05
| 0:05
| [[User:Mario52 | Mario52]]
| [[User:Mario52|Mario52]]
| Any
| Any
| None
| None
| No


|-
|-
| [[Engine Block Tutorial]]
| [[Engine_Block_Tutorial|Engine Block Tutorial]]
| Part Workbench
| Part Workbench
| Beginner
| Beginner
Line 359: Line 338:
| 0.14.3700
| 0.14.3700
|
|
| Yes


|-
|-
| [[Export to STL or OBJ]]
| [[Export_to_STL_or_OBJ|Export to STL or OBJ]]
| Export to STL or OBJ
| Export to STL or OBJ
| Beginner
| Beginner
Line 369: Line 347:
| 0.16.6703
| 0.16.6703
|
|
| No


|-
|-
| [[Extend FEM Module]]
| [[Extend_FEM_Module|Extend FEM Module]]
|
|
|
|
|
|
| [[User:M42kus | M42kus]]
| [[User:M42kus|M42kus]]
|
|
|
|
| No


|-
|-
| [[FEM Beginner tutorial]]
| [[FEM_Beginner_tutorial|FEM Beginner tutorial]]
| FEM Beginner tutorial
| FEM Beginner tutorial
| Beginner
| Beginner
Line 389: Line 365:
| 0.17.11622+
| 0.17.11622+
| [https://github.com/FreeCAD/Examples/blob/master/Whiffle_Ball_Tutorial_ExampleFiles/WhiffleBall_Tutorial_FCWiki.FCStd?raw=true Whiffle Ball]
| [https://github.com/FreeCAD/Examples/blob/master/Whiffle_Ball_Tutorial_ExampleFiles/WhiffleBall_Tutorial_FCWiki.FCStd?raw=true Whiffle Ball]
| Yes


|-
|-
| [[FEM CalculiX Cantilever 3D]]
| [[FEM_CalculiX_Cantilever_3D|FEM CalculiX Cantilever 3D]]
| Finite Element Analysis
| Finite Element Analysis
| Beginner
| Beginner
| 0:10
| 0:10
| [[User:Bernd | Bernd]]
| [[User:Bernd|Bernd]]
| 0.16.6377 or above
| 0.16.6377 or above
|
|
| No


|-
|-
| [[FEM Shear of a Composite Block]]
| [[FEM_Shear_of_a_Composite_Block|FEM Shear of a Composite Block]]
| Finite Element Analysis
| Finite Element Analysis
| Beginner/Intermediate
| Beginner/Intermediate
| 0:300
| 0:300
| [[User:HarryvL | HarryvL]]
| [[User:HarryvL|HarryvL]]
| 0.17.12960 or above
| 0.17.12960 or above
|
|
| No


|-
|-
| [[FEM tutorial]]
| [[FEM_tutorial|FEM tutorial]]
| Finite Element Analysis
| Finite Element Analysis
| Beginner
| Beginner
| 0:10
| 0:10
| [[User:Drei | Drei]]
| [[User:Drei|Drei]]
| 0.16.6700 or above
| 0.16.6700 or above
|
|
| No


|-
|-
| [[FEM Tutorial Python]]
| [[FEM_Tutorial_Python|FEM Tutorial Python]]
| Finite Element Analysis
| Finite Element Analysis
| Intermediate
| Intermediate
| 0:30
| 0:30
| [[User:Bernd | Bernd]]
| [[User:Bernd|Bernd]]
| 0.18.15985 or above
| 0.18.15985 or above
|
|
| No


|-
|-
| [[FreeCAD-Ship s60 tutorial]]
| [[FreeCAD-Ship_s60_tutorial|FreeCAD-Ship s60 tutorial]]
| Ship Workbench
| Ship Workbench
| Beginner
| Beginner
Line 439: Line 410:
|
|
|
|
| No


|-
|-
| [[FreeCAD-Ship s60 tutorial (II)]]
| [[FreeCAD-Ship_s60_tutorial_(II)|FreeCAD-Ship s60 tutorial (II)]]
| Ship Workbench
| Ship Workbench
| Beginner
| Beginner
Line 449: Line 419:
|
|
|
|
| No


|-
|-
| [[How to install additional workbenches]]
| [[How_to_install_additional_workbenches|How to install additional workbenches]]
| Programming
| Programming
| Medium programmer
| Medium programmer
| 0:15
| 0:15
| [[User:R-frank | r-frank]]
| [[User:R-frank|r-frank]]
| Any
| Any
| None
| None
| No


|-
|-
| [[How to install macros]]
| [[How_to_install_macros|How to install macros]]
| Programming
| Programming
| Medium programmer
| Medium programmer
| 0:15
| 0:15
| [[User:Mario52 | Mario52]]
| [[User:Mario52|Mario52]]
| Any
| Any
| None
| None
| No


|-
|-
| [[Import from STL or OBJ]]
| [[Import_from_STL_or_OBJ|Import from STL or OBJ]]
| Import from STL or OBJ
| Import from STL or OBJ
| Beginner
| Beginner
Line 479: Line 446:
| 1.0
| 1.0
| 0.16.6703
| 0.16.6703
| No


|-
|-
| [[Import OpenSCAD code]]
| [[Import_OpenSCAD_code|Import OpenSCAD code]]
| Import OpenSCAD code
| Import OpenSCAD code
| Beginner
| Beginner
Line 489: Line 455:
| 0.16.6704
| 0.16.6704
| None
| None
| No


|-
|-
| [[Import text and geometry from Inkscape]]
| [[Import_text_and_geometry_from_Inkscape|Import text and geometry from Inkscape]]
| Import text and geometry from Inkscape
| Import text and geometry from Inkscape
| Beginner
| Beginner
Line 499: Line 464:
| 0.16.6704
| 0.16.6704
|
|
| No


|-
|-
| [[Import/Export IFC - compiling IfcOpenShell]]
| [[Import/Export_IFC_-_compiling_IfcOpenShell|Import/Export IFC - compiling IfcOpenShell]]
| Arch Workbench
| Arch Workbench
| Advanced
| Advanced
Line 509: Line 473:
|
|
|
|
| No


|-
|-
| [[Measurement_Of_Angles_On_Holes]]
| [[Measurement_Of_Angles_On_Holes|Measurement Of Angles On Holes]]
| TechDraw Workbench
| TechDraw Workbench
| Beginner
| Beginner
Line 519: Line 482:
| 0.19
| 0.19
|
|
| No


|-
|-
| [[PartDesign Bearingholder Tutorial I]]
| [[PartDesign_Bearingholder_Tutorial_I|PartDesign Bearingholder Tutorial I]]
| Product design - Bearingholder #1
| Product design - Bearingholder #1
| Beginner
| Beginner
Line 529: Line 491:
|
|
|
|
| No


|-
|-
| [[PartDesign Bearingholder Tutorial II]]
| [[PartDesign_Bearingholder_Tutorial_II|PartDesign Bearingholder Tutorial II]]
| Product design - Bearingholder #2
| Product design - Bearingholder #2
| Beginner
| Beginner
Line 539: Line 500:
|
|
|
|
| No


|-
|-
| [[PartDesign tutorial]]
| [[PartDesign_tutorial|PartDesign tutorial]]
| Sketcher
| Sketcher
| Beginner
| Beginner
| 0:15
| 0:15
| [[User:Drei | Drei]]
| [[User:Drei|Drei]]
| 0.16 or above
| 0.16 or above
|
|
| No


|-
|-
| [[Path Walkthrough for the Impatient]]
| [[Path_Walkthrough_for_the_Impatient|Path Walkthrough for the Impatient]]
| Path Workbench
| Path Workbench
|
|
Line 559: Line 518:
|
|
|
|
| Yes


|-
|-
| [[Plot Basic tutorial]]
| [[Plot_Basic_tutorial|Plot Basic tutorial]]
| Plot Workbench Basic Tutorial
| Plot Workbench Basic Tutorial
| Beginner
| Beginner
Line 569: Line 527:
|
|
|
|
| No


|-
|-
| [[Plot MultiAxes tutorial]]
| [[Plot_MultiAxes_tutorial|Plot MultiAxes tutorial]]
| Plot workbench
| Plot workbench
| Intermediate
| Intermediate
Line 579: Line 536:
|
|
|
|
| No


|-
|-
| [[Post-Processing of FEM Results with Paraview]]
| [[Post-Processing_of_FEM_Results_with_Paraview|Post-Processing of FEM Results with Paraview]]
| Post-Processing of FEM Results with ParaView
| Post-Processing of FEM Results with ParaView
| Intermediate
| Intermediate
| 2:00
| 2:00
| [[User:HarryvL | HarryvL]]
| [[User:HarryvL|HarryvL]]
| 0.19
| 0.19
| [https://forum.freecadweb.org/download/file.php?id=103403 Beam] and [https://forum.freecadweb.org/download/file.php?id=103557 wall]
| [https://forum.freecadweb.org/download/file.php?id=103403 Beam] and [https://forum.freecadweb.org/download/file.php?id=103557 wall]
| No


|-
|-
| [[Python scripting tutorial]]
| [[Python_scripting_tutorial|Python scripting tutorial]]
| Programming
| Programming
| Intermediate
| Intermediate
Line 599: Line 554:
|
|
|
|
| No


|-
|-
| [[Raytracing tutorial]]
| [[Raytracing_tutorial|Raytracing tutorial]]
| Raytracing
| Raytracing
| Beginner
| Beginner
| 0:010
| 0:010
| [[User:Drei | Drei]]
| [[User:Drei|Drei]]
| 0.16 or above
| 0.16 or above
|
|
| No


|-
|-
| [[Robot 6-Axis]]
| [[Robot_6-Axis|Robot 6-Axis]]
| Robot Workbench
| Robot Workbench
| Intermediate
| Intermediate
Line 619: Line 572:
|
|
|
|
| No


|-
|-
| [[Robot tutorial]]
| [[Robot_tutorial|Robot tutorial]]
| Robot Workbench
| Robot Workbench
| Beginner
| Beginner
Line 629: Line 581:
|
|
|
|
| No


|-
|-
Line 639: Line 590:
| 0.16.6706
| 0.16.6706
|
|
| No


|-
|-
Line 649: Line 599:
| 0.16.6706
| 0.16.6706
|
|
| No


|-
|-
| [[Scripts]]
| [[Scripts|Scripts]]
| Scripting
| Scripting
| Beginner
| Beginner
Line 659: Line 608:
| 0.19
| 0.19
|
|
| No


|-
|-
| [[Sketcher Micro Tutorial - Constraint Practices]]
| [[Sketcher_Micro_Tutorial_-_Constraint_Practices|Sketcher Micro Tutorial - Constraint Practices]]
| Sketcher
| Sketcher
| Beginner
| Beginner
| 0:30
| 0:30
| [[User:Quick61 | Mark Stephen (Quick61)]] and vocx
| [[User:Quick61|Mark Stephen (Quick61)]] and vocx
| 0.19
| 0.19
| [https://forum.freecadweb.org/viewtopic.php?f=36&p=371659#p371659 Sketcher Constraints practices]
| [https://forum.freecadweb.org/viewtopic.php?f=36&p=371659#p371659 Sketcher Constraints practices]
| No


|-
|-
| [[Sketcher reference]]
| [[Sketcher_reference|Sketcher reference]]
|
|
|
|
Line 679: Line 626:
|
|
|
|
| No


|-
|-
| [[Sketcher requirement for a sketch]]
| [[Sketcher_requirement_for_a_sketch|Sketcher requirement for a sketch]]
| Sketcher
| Sketcher
| Beginner
| Beginner
|
|
| [[User:Maker | Maker]]
| [[User:Maker|Maker]]
|
|
| None
| None
| No


|-
|-
| [[Sketcher Tutorial]]
| [[Sketcher_Tutorial|Sketcher Tutorial]]
| Sketcher
| Sketcher
| Beginner
| Beginner
Line 699: Line 644:
|
|
|
|
| No


|-
|-
Line 709: Line 653:
| 0.19
| 0.19
| None
| None
| No


|-
|-
| [[TechDraw TemplateHowTo]]
| [[TechDraw_TemplateHowTo|TechDraw TemplateHowTo]]
| TechDraw Workbench
| TechDraw Workbench
| Intermediate
| Intermediate
Line 719: Line 662:
| 0.17
| 0.17
| None
| None
| No


|-
|-
| [[Thread for Screw Tutorial]]
| [[Thread_for_Screw_Tutorial|Thread for Screw Tutorial]]
| Product design
| Product design
| Advanced
| Advanced
| 1:00
| 1:00
| [[User:DeepSOIC | DeepSOIC]], [[User:Murdic | Murdic]], vocx
| [[User:DeepSOIC|DeepSOIC]], [[User:Murdic|Murdic]], vocx
| 0.19
| 0.19
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=44668 Updated: Thread for screw tutorial]
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=44668 Updated: Thread for screw tutorial]
| No


|-
|-
| [[Toothbrush Head Stand]]
| [[Toothbrush_Head_Stand|Toothbrush Head Stand]]
| Modeling
| Modeling
| Beginner
| Beginner
| 1:00
| 1:00
| [[User:EmmanuelG | EmmanuelG]]
| [[User:EmmanuelG|EmmanuelG]]
| 0.16 or greater
| 0.16 or greater
| [https://www.thingiverse.com/thing:2403310 Thingiverse 2403310]
| [https://www.thingiverse.com/thing:2403310 Thingiverse 2403310]
| No


|-
|-
| [[Topological data scripting]]
| [[Topological_data_scripting|Topological data scripting]]
| Programming
| Programming
| Intermediate
| Intermediate
Line 749: Line 689:
|
|
|
|
| No


|-
|-
| [[Transient FEM analysis]]
| [[Transient_FEM_analysis|Transient FEM analysis]]
| Transient FEM analysis
| Transient FEM analysis
|
|
Line 759: Line 698:
|
|
|
|
| Yes


|-
|-
| [[Tutorial custom placing of windows and doors]]
| [[Tutorial_custom_placing_of_windows_and_doors|Tutorial custom placing of windows and doors]]
| Architecture
| Architecture
| Intermediate
| Intermediate
| 1:00
| 1:00
| [[User:Vocx | Vocx]]
| [[User:Vocx|Vocx]]
| 0.18 or above
| 0.18 or above
| None
| None
| No


|-
|-
| [[Tutorial for open windows]]
| [[Tutorial_for_open_windows|Tutorial for open windows]]
| Architecture
| Architecture
| Beginner
| Beginner
| 1:00
| 1:00
| [[User:Vocx | Vocx]]
| [[User:Vocx|Vocx]]
| 0.18 or above
| 0.18 or above
| None
| None
| No


|-
|-
| [[Tutorial FreeCAD POV ray]]
| [[Tutorial_FreeCAD_POV_ray|Tutorial FreeCAD POV ray]]
| Rendering
| Rendering
| Intermediate
| Intermediate
| 2:00
| 2:00
| [[User:Vocx | Vocx]]
| [[User:Vocx|Vocx]]
| 0.18 or above
| 0.18 or above
| None
| None
| No


|-
|-
| [[Tutorial Render with Blender]]
| [[Tutorial_Render_with_Blender|Tutorial Render with Blender]]
| Rendering
| Rendering
| Intermediate
| Intermediate
| 1:00
| 1:00
| [[User:Vocx | Vocx]]
| [[User:Vocx|Vocx]]
| 0.18 or above
| 0.18 or above
| None
| None
| No


|-
|-
| [[VRML Preparation for Robot Simulation]]
| [[VRML_Preparation_for_Robot_Simulation|VRML Preparation for Robot Simulation]]
| Robot Workbench
| Robot Workbench
| Intermediate
| Intermediate
Line 809: Line 743:
| 0.11.4252ppa1
| 0.11.4252ppa1
|
|
| No


|-
|-
| [[Washers]]
| [[Washers|Washers]]
|
|
|
|
Line 819: Line 752:
|
|
| None
| None
| Yes


|-
|-
| [[Whiffle Ball tutorial]]
| [[Whiffle_Ball_tutorial|Whiffle Ball tutorial]]
| Product design
| Product design
| Beginner
| Beginner
Line 829: Line 761:
| 0.17 and above
| 0.17 and above
| [https://github.com/FreeCAD/Examples/blob/master/Whiffle_Ball_Tutorial_ExampleFiles/WhiffleBall_Tutorial_FCWiki.FCStd?raw=true WhiffleBall_Tutorial_FCWiki.FCStd]
| [https://github.com/FreeCAD/Examples/blob/master/Whiffle_Ball_Tutorial_ExampleFiles/WhiffleBall_Tutorial_FCWiki.FCStd?raw=true WhiffleBall_Tutorial_FCWiki.FCStd]
| No


|-
|-
| [[Wikihouse porting tutorial]]
| [[Wikihouse_porting_tutorial|Wikihouse porting tutorial]]
| Wikihouse porting tutorial
| Wikihouse porting tutorial
| Intermediate/Advanced
| Intermediate/Advanced
Line 839: Line 770:
|
|
|
|
| No


|}
|}

Revision as of 19:46, 18 October 2021

本页展示了一系列精选的高质量图文教程。完整无序的教程集可以在Category:Tutorials找到。

可通过访问离站教程视频教程来查阅外网提供的系列教程。YouTube是一个极有用的视频教程源。

如果您希望为FreeCAD维基文档与教程的编写做出贡献,请参考维基的通用指南WikiPages,并阅读tutorial guidelines

请注意每个教程中所用的FreeCAD版本,因为有些教程采用的是老版FreeCAD。尽管常规的建模方式在新版FreeCAD中依然可行,但是某些工具却可能已经发生了变化。

建筑物与BIM

零件造型

FreeCAD提供了两种主要工作流程来实现零件造型(modeling part):

请注意,零件设计工作台的工作流程自FreeCAD 0.17版起有了较大变化,而部分教程还未对此更新,可能仍然采用的是0.16版本。

The Raspberry Pi project has made simple tutorials that are easy to follow, particularly for those new to CAD systems:

绘制底图与草图

技术制图

FEM

CNC & 3D打印

渲染

Robot workbench

机器人工作台

绘制函数图像

Scripting

These are tutorials that are related to scripting or programming. They are geared towards more experienced users, who are already somewhat familiar with the program.

Tutorials - Comprehensive list

Here are listed all the tutorials that are not in the manual regardless of their quality. If a tutorial is listed in the Category:Tutorials and not in this table please insert it.

Tutorial Topic Level Time to complete hh:mm Authors FreeCAD version Example files


Add FEM constraint tutorial M42kus
Add FEM equation tutorial JohnWang
Aeroplane Part Workbench Beginner 0:10 Hughthecat
Analysis of reinforced concrete with FEM Reinforced concrete with FEM Intermediate 1:00 HarryvL 0.19 or above
Arch panel tutorial Modeling an architectural panel Beginner 1:00 Yorik
Arch tutorial Modeling Intermediate Yorik 0.14
Basic Attachment Tutorial Sketch attachment Beginner/intermediate 01:00 Bance 0.17 and above Basic Attachment Tutorial.FCStd
Basic modeling tutorial Introduction to modelling Beginner 0:15 NormandC Any None
Basic Part Design Tutorial Modeling Beginner Mark Stephen (Quick61) and HarryGeier 0.17 or above Basic Part Design for v0.17
Basic Sketcher Tutorial Sketcher Beginner 1:00 Drei and Vocx 0.19 Basic Sketcher tutorial
Basic TechDraw Tutorial TechDraw Workbench Beginner WandererFan 0.17 and above Basic Part Design for v0.17 Sample Basic TechDraw Tutorial Sample
Code snippets Python Beginner
Creating a simple part with PartDesign Modeling Beginner 1:00 GlouGlou 0.17 or above Creating a simple PartDesign Body.FCStd
Customize Toolbars Beginner 0:05 Mario52 Any None
Draft ShapeString tutorial Product Design Beginner 0:30 r-frank and vocx 0.17 and above Draft_Shapestring_Text
Draft tutorial Drafting Beginner 0:30 Drei and vocx 0.19 Draft tutorial updated
Drawing Template HowTo (obsolete) 2D Drafting Intermediate 1:00 Mark Stephen (Quick61) 0.14.3700 or above None
Drawing tutorial (obsolete) Blueprints / Drawings Beginner 0:15 Drei 0.16 or above
Dxf Importer Install Intermediate 0:05 Mario52 Any None
Engine Block Tutorial Part Workbench Beginner 1:00 Andrewbuck40 0.14.3700
Export to STL or OBJ Export to STL or OBJ Beginner 0:20 r-frank 0.16.6703
Extend FEM Module M42kus
FEM Beginner tutorial FEM Beginner tutorial Beginner thschrader 0.17.11622+ Whiffle Ball
FEM CalculiX Cantilever 3D Finite Element Analysis Beginner 0:10 Bernd 0.16.6377 or above
FEM Shear of a Composite Block Finite Element Analysis Beginner/Intermediate 0:300 HarryvL 0.17.12960 or above
FEM tutorial Finite Element Analysis Beginner 0:10 Drei 0.16.6700 or above
FEM Tutorial Python Finite Element Analysis Intermediate 0:30 Bernd 0.18.15985 or above
FreeCAD-Ship s60 tutorial Ship Workbench Beginner
FreeCAD-Ship s60 tutorial (II) Ship Workbench Beginner
How to install additional workbenches Programming Medium programmer 0:15 r-frank Any None
How to install macros Programming Medium programmer 0:15 Mario52 Any None
Import from STL or OBJ Import from STL or OBJ Beginner 0:30 r-frank 1.0 0.16.6703
Import OpenSCAD code Import OpenSCAD code Beginner 0:30 r-frank 0.16.6704 None
Import text and geometry from Inkscape Import text and geometry from Inkscape Beginner 0:30 r-frank 0.16.6704
Import/Export IFC - compiling IfcOpenShell Arch Workbench Advanced 2:00 Pablo Gil
Measurement Of Angles On Holes TechDraw Workbench Beginner 0:01 AnHi 0.19
PartDesign Bearingholder Tutorial I Product design - Bearingholder #1 Beginner 60 minutes NormandC
PartDesign Bearingholder Tutorial II Product design - Bearingholder #2 Beginner 60 minutes NormandC
PartDesign tutorial Sketcher Beginner 0:15 Drei 0.16 or above
Path Walkthrough for the Impatient Path Workbench Chrisb
Plot Basic tutorial Plot Workbench Basic Tutorial Beginner
Plot MultiAxes tutorial Plot workbench Intermediate
Post-Processing of FEM Results with Paraview Post-Processing of FEM Results with ParaView Intermediate 2:00 HarryvL 0.19 Beam and wall
Python scripting tutorial Programming Intermediate
Raytracing tutorial Raytracing Beginner 0:010 Drei 0.16 or above
Robot 6-Axis Robot Workbench Intermediate
Robot tutorial Robot Workbench Beginner r-frank
Scripted Parts: Ball Bearing - Part 1 Part Scripting - Ball Bearing #1 Beginner 0:30 r-frank 0.16.6706
Scripted Parts: Ball Bearing - Part 2 Part Scripting - Ball Bearing #2 Beginner 0:30 r-frank 0.16.6706
Scripts Scripting Beginner onekk Carlo 0.19
Sketcher Micro Tutorial - Constraint Practices Sketcher Beginner 0:30 Mark Stephen (Quick61) and vocx 0.19 Sketcher Constraints practices
Sketcher reference
Sketcher requirement for a sketch Sketcher Beginner Maker None
Sketcher Tutorial Sketcher Beginner Ulrich
TechDraw pitch circle tutorial TechDraw Workbench Beginner 0:10 Andergrin 0.19 None
TechDraw TemplateHowTo TechDraw Workbench Intermediate 1:00 wandererfan 0.17 None
Thread for Screw Tutorial Product design Advanced 1:00 DeepSOIC, Murdic, vocx 0.19 Updated: Thread for screw tutorial
Toothbrush Head Stand Modeling Beginner 1:00 EmmanuelG 0.16 or greater Thingiverse 2403310
Topological data scripting Programming Intermediate
Transient FEM analysis Transient FEM analysis
Tutorial custom placing of windows and doors Architecture Intermediate 1:00 Vocx 0.18 or above None
Tutorial for open windows Architecture Beginner 1:00 Vocx 0.18 or above None
Tutorial FreeCAD POV ray Rendering Intermediate 2:00 Vocx 0.18 or above None
Tutorial Render with Blender Rendering Intermediate 1:00 Vocx 0.18 or above None
VRML Preparation for Robot Simulation Robot Workbench Intermediate 0.11.4252ppa1
Washers None
Whiffle Ball tutorial Product design Beginner 0:30 r-frank and vocx 0.17 and above WhiffleBall_Tutorial_FCWiki.FCStd
Wikihouse porting tutorial Wikihouse porting tutorial Intermediate/Advanced 1:00