Tutorials/ko: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 123: Line 123:


== Tutorials - Comprehensive list ==
== Tutorials - Comprehensive list ==

Here are listed all the tutorials that are not in the manual '''regardless of their quality'''. If a tutorial is listed in the [[:Category:Tutorials]] and not in this table please insert it.
Here are listed all the tutorials that are not in the manual '''regardless of their quality'''. If a tutorial is listed in the [[:Category:Tutorials]] and not in this table please insert it.


Line 135: Line 136:
! Example files
! Example files


<!-- Template for new entries
<!-- Template for new entries
|-
|-
| [[Tutorial|Tutorial]]
| [[Tutorial|Tutorial]]
Line 149: Line 150:
| [[Add_Button_to_FEM_Toolbar_Tutorial|Add Button to FEM Toolbar Tutorial]]
| [[Add_Button_to_FEM_Toolbar_Tutorial|Add Button to FEM Toolbar Tutorial]]
| Finite Element Analysis
| Finite Element Analysis
|
|
|
|
| [[User:JohnWang|JohnWang]]
| [[User:JohnWang|JohnWang]]
|
|
|
|


Line 158: Line 159:
| [[Add_FEM_Constraint_Tutorial|Add FEM Constraint Tutorial]]
| [[Add_FEM_Constraint_Tutorial|Add FEM Constraint Tutorial]]
| Finite Element Analysis
| Finite Element Analysis
|
|
|
|
| [[User:M42kus|M42kus]]
| [[User:M42kus|M42kus]]
|
|
|
|


Line 167: Line 168:
| [[Add_FEM_Equation_Tutorial|Add FEM Equation Tutorial]]
| [[Add_FEM_Equation_Tutorial|Add FEM Equation Tutorial]]
| Finite Element Analysis
| Finite Element Analysis
|
|
|
|
| [[User:JohnWang|JohnWang]]
| [[User:JohnWang|JohnWang]]
|
|
|
|


|-
|-
Line 179: Line 180:
| 0:10
| 0:10
| Hughthecat
| Hughthecat
|
|
|
|


|-
|-
Line 189: Line 190:
| [[User:HarryvL|HarryvL]]
| [[User:HarryvL|HarryvL]]
| 0.19 or above
| 0.19 or above
|
|


|-
|-
Line 198: Line 199:
| Yorik
| Yorik
|
|
|
|


|-
|-
| [[Arch_tutorial|Arch tutorial]]
| [[Arch_tutorial|Arch tutorial]]
| Modeling
| Modeling
| Intermediate
| Intermediate
|
|
| [[User:Yorik|Yorik]]
| [[User:Yorik|Yorik]]
| 0.14
| 0.14
|
|


|-
|-
Line 213: Line 214:
| Sketch attachment
| Sketch attachment
| Beginner/intermediate
| Beginner/intermediate
| 01:00
| 1:00
| [[User:Bance|Bance]]
| [[User:Bance|Bance]]
| 0.17 and above
| 0.17 and above
| [https://github.com/BanceFC/Examples/blob/master/Basic_Attachment_Tutorial.FCStd Basic Attachment Tutorial.FCStd]
| [https://github.com/BanceFC/Examples/blob/master/Basic_Attachment_Tutorial.FCStd Basic Attachment Tutorial.FCStd]


|-
|-
| [[Basic_modeling_tutorial|Basic modeling tutorial]]
| [[Basic_modeling_tutorial|Basic modeling tutorial]]
| Introduction to modelling
| Introduction to modelling
| Beginner
| Beginner
| 0:15
| 0:15
Line 231: Line 232:
| Modeling
| Modeling
| Beginner
| Beginner
|
|
| [[User:Quick61|Mark Stephen (Quick61)]] and [[User:HarryGeier|HarryGeier]]
| [[User:Quick61|Mark Stephen (Quick61)]] and [[User:HarryGeier|HarryGeier]]
| 0.17 or above
| 0.17 or above
Line 238: Line 239:
|-
|-
| [[Basic_Sketcher_Tutorial|Basic Sketcher Tutorial]]
| [[Basic_Sketcher_Tutorial|Basic Sketcher Tutorial]]
| Sketcher
| Sketcher
| Beginner
| Beginner
| 1:00
| 1:00
Line 249: Line 250:
| TechDraw Workbench
| TechDraw Workbench
| Beginner
| Beginner
|
|
| [[User:WandererFan|WandererFan]]
| [[User:WandererFan|WandererFan]]
| 0.17 and above
| 0.17 and above
Line 258: Line 259:
| Python
| Python
| Beginner
| Beginner
|
|
|
|
|
|
|
|


|-
|-
Line 274: Line 275:
|-
|-
| [[Customize_Toolbars|Customize Toolbars]]
| [[Customize_Toolbars|Customize Toolbars]]
|
|
| Beginner
| Beginner
| 0:05
| 0:05
Line 286: Line 287:
| Beginner
| Beginner
| 0:30
| 0:30
| r-frank and vocx
| r-frank and vocx
| 0.17 and above
| 0.17 and above
| [https://github.com/FreeCAD/Examples/blob/master/Draft_Shapestring_Tutorial_Examples/Draft_Shapestring_Tutorial_Text.FCStd?raw=true Draft_Shapestring_Text]
| [https://github.com/FreeCAD/Examples/blob/master/Draft_Shapestring_Tutorial_Examples/Draft_Shapestring_Tutorial_Text.FCStd?raw=true Draft_Shapestring_Text]
Line 301: Line 302:
|-
|-
| [[Drawing_Template_HowTo|Drawing Template HowTo (obsolete)]]
| [[Drawing_Template_HowTo|Drawing Template HowTo (obsolete)]]
| 2D Drafting
| 2D Drafting
| Intermediate
| Intermediate
| 1:00
| 1:00
| [[User:Quick61|Mark Stephen (Quick61)]]
| [[User:Quick61|Mark Stephen (Quick61)]]
Line 310: Line 311:
|-
|-
| [[Drawing_tutorial|Drawing tutorial (obsolete)]]
| [[Drawing_tutorial|Drawing tutorial (obsolete)]]
| Blueprints / Drawings
| Blueprints / Drawings
| Beginner
| Beginner
| 0:15
| 0:15
| [[User:Drei|Drei]]
| [[User:Drei|Drei]]
| 0.16 or above
| 0.16 or above
|
|


|-
|-
| [[Dxf_Importer_Install|Dxf Importer Install]]
| [[Dxf_Importer_Install|Dxf Importer Install]]
|
|
| Intermediate
| Intermediate
| 0:05
| 0:05
Line 331: Line 332:
| Beginner
| Beginner
| 1:00
| 1:00
| Andrewbuck40
| Andrewbuck40
| 0.14.3700
| 0.14.3700
|
|


|-
|-
| [[Export_to_STL_or_OBJ|Export to STL or OBJ]]
| [[Export_to_STL_or_OBJ|Export to STL or OBJ]]
| Export to STL or OBJ
| Export to STL or OBJ
| Beginner
| Beginner
| 0:20
| 0:20
| r-frank
| r-frank
| 0.16.6703
| 0.16.6703
|
|


|-
|-
| [[Extend_FEM_Module|Extend FEM Module]]
| [[Extend_FEM_Module|Extend FEM Module]]
| Finite Element Analysis
| Finite Element Analysis
|
|
|
|
| [[User:M42kus|M42kus]]
| [[User:M42kus|M42kus]]
|
|
|
|


|-
|-
| [[FEM_CalculiX_Cantilever_3D|FEM CalculiX Cantilever 3D]]
| [[FEM_CalculiX_Cantilever_3D|FEM CalculiX Cantilever 3D]]
| Finite Element Analysis
| Finite Element Analysis
| Beginner
| Beginner
| 0:10
| 0:10
| [[User:Bernd|Bernd]]
| [[User:Bernd|Bernd]]
| 0.16.6377 or above
| 0.16.6377 or above
|
|


|-
|-
| [[FEM_Shear_of_a_Composite_Block|FEM Shear of a Composite Block]]
| [[FEM_Shear_of_a_Composite_Block|FEM Shear of a Composite Block]]
| Finite Element Analysis
| Finite Element Analysis
| Beginner/Intermediate
| Beginner/Intermediate
| 0:300
| 0:300
| [[User:HarryvL|HarryvL]]
| [[User:HarryvL|HarryvL]]
| 0.17.12960 or above
| 0.17.12960 or above
|
|


|-
|-
| [[FEM_tutorial|FEM tutorial]]
| [[FEM_tutorial|FEM tutorial]]
| Finite Element Analysis
| Finite Element Analysis
| Beginner
| Beginner
| 0:10
| 0:10
| [[User:Drei|Drei]]
| [[User:Drei|Drei]]
| 0.16.6700 or above
| 0.16.6700 or above
|
|


|-
|-
| [[FEM_Tutorial_Python|FEM Tutorial Python]]
| [[FEM_Tutorial_Python|FEM Tutorial Python]]
| Finite Element Analysis
| Finite Element Analysis
| Intermediate
| Intermediate
| 0:30
| 0:30
| [[User:Bernd|Bernd]]
| [[User:Bernd|Bernd]]
| 0.18.15985 or above
| 0.18.15985 or above
|
|


|-
|-
| [[FreeCAD-Ship_s60_tutorial|FreeCAD-Ship s60 tutorial]]
| [[FreeCAD-Ship_s60_tutorial|FreeCAD-Ship s60 tutorial]]
| Ship Workbench
| Ship Workbench
| Beginner
| Beginner
|
|
|
|
|
|
|
|


|-
|-
| [[FreeCAD-Ship_s60_tutorial_(II)|FreeCAD-Ship s60 tutorial (II)]]
| [[FreeCAD-Ship_s60_tutorial_(II)|FreeCAD-Ship s60 tutorial (II)]]
| Ship Workbench
| Ship Workbench
| Beginner
| Beginner
|
|
|
|
|
|
|
|


|-
|-
| [[How_to_install_additional_workbenches|How to install additional workbenches]]
| [[How_to_install_additional_workbenches|How to install additional workbenches]]
| Programming
| Programming
| Medium programmer
| Medium programmer
| 0:15
| 0:15
| [[User:R-frank|r-frank]]
| [[User:R-frank|r-frank]]
Line 418: Line 419:
|-
|-
| [[How_to_install_macros|How to install macros]]
| [[How_to_install_macros|How to install macros]]
| Programming
| Programming
| Medium programmer
| Medium programmer
| 0:15
| 0:15
Line 427: Line 428:
|-
|-
| [[Import_from_STL_or_OBJ|Import from STL or OBJ]]
| [[Import_from_STL_or_OBJ|Import from STL or OBJ]]
| Import from STL or OBJ
| Import from STL or OBJ
| Beginner
| Beginner
| 0:30
| 0:30
| r-frank
| r-frank
| 1.0
| 1.0
| 0.16.6703
| 0.16.6703


|-
|-
| [[Import_OpenSCAD_code|Import OpenSCAD code]]
| [[Import_OpenSCAD_code|Import OpenSCAD code]]
| Import OpenSCAD code
| Import OpenSCAD code
| Beginner
| Beginner
| 0:30
| 0:30
| r-frank
| r-frank
| 0.16.6704
| 0.16.6704
| None
| None


|-
|-
| [[Import_text_and_geometry_from_Inkscape|Import text and geometry from Inkscape]]
| [[Import_text_and_geometry_from_Inkscape|Import text and geometry from Inkscape]]
| Import text and geometry from Inkscape
| Import text and geometry from Inkscape
| Beginner
| Beginner
| 0:30
| 0:30
| r-frank
| r-frank
| 0.16.6704
| 0.16.6704
|
|


|-
|-
| [[Import/Export_IFC_-_compiling_IfcOpenShell|Import/Export IFC - compiling IfcOpenShell]]
| [[Import/Export_IFC_-_compiling_IfcOpenShell|Import/Export IFC - compiling IfcOpenShell]]
| Arch Workbench
| Arch Workbench
| Advanced
| Advanced
| 2:00
| 2:00
| Pablo Gil
| Pablo Gil
|
|
|
|


|-
|-
Line 468: Line 469:
| AnHi
| AnHi
| 0.19
| 0.19
|
|


|-
|-
Line 474: Line 475:
| Product design - Bearingholder #1
| Product design - Bearingholder #1
| Beginner
| Beginner
| 1:00
| 60 minutes
| NormandC
| NormandC
|
|
|
|


|-
|-
Line 483: Line 484:
| Product design - Bearingholder #2
| Product design - Bearingholder #2
| Beginner
| Beginner
| 1:00
| 60 minutes
| NormandC
| NormandC
|
|
|
|


|-
|-
| [[PartDesign_tutorial|PartDesign tutorial]]
| [[PartDesign_tutorial|PartDesign tutorial]]
| Sketcher
| Sketcher
| Beginner
| Beginner
| 0:15
| 0:15
| [[User:Drei|Drei]]
| [[User:Drei|Drei]]
| 0.16 or above
| 0.16 or above
|
|


|-
|-
| [[Path_Walkthrough_for_the_Impatient|Path Walkthrough for the Impatient]]
| [[Path_Walkthrough_for_the_Impatient|Path Walkthrough for the Impatient]]
| Path Workbench
| Path Workbench
|
|
|
|
| Chrisb
| Chrisb
|
|
|
|


|-
|-
| [[Plot_Basic_tutorial|Plot Basic tutorial]]
| [[Plot_Basic_tutorial|Plot Basic tutorial]]
| Plot Workbench Basic Tutorial
| Plot Workbench Basic Tutorial
| Beginner
| Beginner
|
|
|
|
|
|
|
|


|-
|-
| [[Plot_MultiAxes_tutorial|Plot MultiAxes tutorial]]
| [[Plot_MultiAxes_tutorial|Plot MultiAxes tutorial]]
| Plot workbench
| Plot workbench
| Intermediate
| Intermediate
|
|
|
|
|
|
|
|


|-
|-
| [[Post-Processing_of_FEM_Results_with_Paraview|Post-Processing of FEM Results with Paraview]]
| [[Post-Processing_of_FEM_Results_with_Paraview|Post-Processing of FEM Results with Paraview]]
| Post-Processing of FEM Results with ParaView
| Post-Processing of FEM Results with ParaView
| Intermediate
| Intermediate
| 2:00
| 2:00
| [[User:HarryvL|HarryvL]]
| [[User:HarryvL|HarryvL]]
Line 535: Line 536:
|-
|-
| [[Python_scripting_tutorial|Python scripting tutorial]]
| [[Python_scripting_tutorial|Python scripting tutorial]]
| Programming
| Programming
| Intermediate
| Intermediate
|
|
|
|
|
|
|
|


|-
|-
| [[Raytracing_tutorial|Raytracing tutorial]]
| [[Raytracing_tutorial|Raytracing tutorial]]
| Raytracing
| Raytracing
| Beginner
| Beginner
| 0:010
| 0:010
| [[User:Drei|Drei]]
| [[User:Drei|Drei]]
| 0.16 or above
| 0.16 or above
|
|


|-
|-
| [[Robot_6-Axis|Robot 6-Axis]]
| [[Robot_6-Axis|Robot 6-Axis]]
| Robot Workbench
| Robot Workbench
| Intermediate
| Intermediate
|
|
|
|
|
|
|
|


|-
|-
| [[Robot_tutorial|Robot tutorial]]
| [[Robot_tutorial|Robot tutorial]]
| Robot Workbench
| Robot Workbench
| Beginner
| Beginner
|
|
| r-frank
| r-frank
|
|
|
|


|-
|-
| [[Scripted_Parts:_Ball_Bearing_-_Part_1|Scripted Parts: Ball Bearing - Part 1]]
| [[Scripted_Parts:_Ball_Bearing_-_Part_1|Scripted Parts: Ball Bearing - Part 1]]
| Part Scripting - Ball Bearing #1
| Part Scripting - Ball Bearing #1
| Beginner
| Beginner
| 0:30
| 0:30
| r-frank
| r-frank
| 0.16.6706
| 0.16.6706
|
|


|-
|-
| [[Scripted_Parts:_Ball_Bearing_-_Part_2|Scripted Parts: Ball Bearing - Part 2]]
| [[Scripted_Parts:_Ball_Bearing_-_Part_2|Scripted Parts: Ball Bearing - Part 2]]
| Part Scripting - Ball Bearing #2
| Part Scripting - Ball Bearing #2
| Beginner
| Beginner
| 0:30
| 0:30
| r-frank
| r-frank
| 0.16.6706
| 0.16.6706
|
|


|-
|-
| [[Scripts|Scripts]]
| [[Scripts|Scripts]]
| Scripting
| Scripting
| Beginner
| Beginner
|
|
| onekk Carlo
| onekk Carlo
| 0.19
| 0.19
|
|


|-
|-
| [[Sketcher_Micro_Tutorial_-_Constraint_Practices|Sketcher Micro Tutorial - Constraint Practices]]
| [[Sketcher_Micro_Tutorial_-_Constraint_Practices|Sketcher Micro Tutorial - Constraint Practices]]
| Sketcher
| Sketcher
| Beginner
| Beginner
| 0:30
| 0:30
| [[User:Quick61|Mark Stephen (Quick61)]] and vocx
| [[User:Quick61|Mark Stephen (Quick61)]] and vocx
| 0.19
| 0.19
| [https://forum.freecadweb.org/viewtopic.php?f=36&p=371659#p371659 Sketcher Constraints practices]
| [https://forum.freecadweb.org/viewtopic.php?f=36&p=371659#p371659 Sketcher Constraints practices]


|-
|-
| [[Sketcher_reference|Sketcher reference]]
| [[Sketcher_reference|Sketcher reference]]
|
|
|
|
|
|
|
|
|
|
|
|


|-
|-
| [[Sketcher_requirement_for_a_sketch|Sketcher requirement for a sketch]]
| [[Sketcher_requirement_for_a_sketch|Sketcher requirement for a sketch]]
| Sketcher
| Sketcher
| Beginner
| Beginner
|
|
| [[User:Maker|Maker]]
| [[User:Maker|Maker]]
|
|
| None
| None


|-
|-
| [[Sketcher_Tutorial|Sketcher Tutorial]]
| [[Sketcher_Tutorial|Sketcher Tutorial]]
| Sketcher
| Sketcher
| Beginner
| Beginner
|
|
| Ulrich
| Ulrich
|
|
|
|


|-
|-
| [[TechDraw_Pitch_Circle_Tutorial|TechDraw Pitch Circle Tutorial]]
| [[TechDraw_Pitch_Circle_Tutorial|TechDraw Pitch Circle Tutorial]]
| TechDraw Workbench
| TechDraw Workbench
| Beginner
| Beginner
| 0:10
| 0:10
Line 643: Line 644:
|-
|-
| [[TechDraw_TemplateGenerator|TechDraw TemplateGenerator]]
| [[TechDraw_TemplateGenerator|TechDraw TemplateGenerator]]
| TechDraw Workbench
| TechDraw Workbench
| Intermediate
| Intermediate
|
|
| [[User:FBXL5|FBXL5]]
| [[User:FBXL5|FBXL5]]
| 0.19
| 0.19
| None
| None


|-
|-
| [[TechDraw_TemplateHowTo|TechDraw TemplateHowTo]]
| [[TechDraw_TemplateHowTo|TechDraw TemplateHowTo]]
| TechDraw Workbench
| TechDraw Workbench
| Intermediate
| Intermediate
| 1:00
| 1:00
| wandererfan
| wandererfan
| 0.17
| 0.17
| None
| None


Line 662: Line 663:
| [[Thread_for_Screw_Tutorial|Thread for Screw Tutorial]]
| [[Thread_for_Screw_Tutorial|Thread for Screw Tutorial]]
| Product design
| Product design
| Advanced
| Advanced
| 1:00
| 1:00
| [[User:DeepSOIC|DeepSOIC]], [[User:Murdic|Murdic]], vocx
| [[User:DeepSOIC|DeepSOIC]], [[User:Murdic|Murdic]], vocx
| 0.19
| 0.19
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=44668 Updated: Thread for screw tutorial]
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=44668 Updated: Thread for screw tutorial]


|-
|-
| [[Toothbrush_Head_Stand|Toothbrush Head Stand]]
| [[Toothbrush_Head_Stand|Toothbrush Head Stand]]
| Modeling
| Modeling
| Beginner
| Beginner
| 1:00
| 1:00
| [[User:EmmanuelG|EmmanuelG]]
| [[User:EmmanuelG|EmmanuelG]]
Line 680: Line 681:
| [[Topological_data_scripting|Topological data scripting]]
| [[Topological_data_scripting|Topological data scripting]]
| Programming
| Programming
| Intermediate
| Intermediate
|
|
|
|
|
|
|
|


|-
|-
| [[Transient_FEM_analysis|Transient FEM analysis]]
| [[Transient_FEM_analysis|Transient FEM analysis]]
| Transient FEM analysis
| Transient FEM analysis
|
|
|
|
|
|
|
|
|
|


|-
|-
| [[Tutorial_custom_placing_of_windows_and_doors|Tutorial custom placing of windows and doors]]
| [[Tutorial_custom_placing_of_windows_and_doors|Tutorial custom placing of windows and doors]]
| Architecture
| Architecture
| Intermediate
| Intermediate
| 1:00
| 1:00
| [[User:Vocx|Vocx]]
| [[User:Vocx|Vocx]]
Line 706: Line 707:
|-
|-
| [[Tutorial_for_open_windows|Tutorial for open windows]]
| [[Tutorial_for_open_windows|Tutorial for open windows]]
| Architecture
| Architecture
| Beginner
| Beginner
| 1:00
| 1:00
| [[User:Vocx|Vocx]]
| [[User:Vocx|Vocx]]
Line 715: Line 716:
|-
|-
| [[Tutorial_FreeCAD_POV_ray|Tutorial FreeCAD POV ray]]
| [[Tutorial_FreeCAD_POV_ray|Tutorial FreeCAD POV ray]]
| Rendering
| Rendering
| Intermediate
| Intermediate
| 2:00
| 2:00
| [[User:Vocx|Vocx]]
| [[User:Vocx|Vocx]]
| 0.18 or above
| 0.18 or above
| None

|-
| [[Tutorial_KinematicAssembly|Tutorial KinematicAssembly]]
| Assemly3
| Beginner
| 0:30
| [[User:FBXL5|FBXL5]]
| 0.20 or above
| None

|-
| [[Tutorial_KinematicController|Tutorial KinematicController]]
| Programming
| Intermediate
| 1:00
| [[User:FBXL5|FBXL5]]
| 0.20 or above
| None
| None


|-
|-
| [[Tutorial_Render_with_Blender|Tutorial Render with Blender]]
| [[Tutorial_Render_with_Blender|Tutorial Render with Blender]]
| Rendering
| Rendering
| Intermediate
| Intermediate
| 1:00
| 1:00
| [[User:Vocx|Vocx]]
| [[User:Vocx|Vocx]]
Line 734: Line 753:
| [[VRML_Preparation_for_Robot_Simulation|VRML Preparation for Robot Simulation]]
| [[VRML_Preparation_for_Robot_Simulation|VRML Preparation for Robot Simulation]]
| Robot Workbench
| Robot Workbench
| Intermediate
| Intermediate
|
|
|
|
| 0.11.4252ppa1
| 0.11.4252ppa1
|
|


|-
|-
| [[Washers|Washers]]
| [[Washers|Washers]]
|
|
|
|
|
|
|
|
|
|
| None
| None


|-
|-
| [[Whiffle_Ball_tutorial|Whiffle Ball tutorial]]
| [[Whiffle_Ball_tutorial|Whiffle Ball tutorial]]
| Product design
| Product design
| Beginner
| Beginner
| 0:30
| 0:30
| r-frank and vocx
| r-frank and vocx
| 0.17 and above
| 0.17 and above
| [https://github.com/FreeCAD/Examples/blob/master/Whiffle_Ball_Tutorial_ExampleFiles/WhiffleBall_Tutorial_FCWiki.FCStd?raw=true WhiffleBall_Tutorial_FCWiki.FCStd]
| [https://github.com/FreeCAD/Examples/blob/master/Whiffle_Ball_Tutorial_ExampleFiles/WhiffleBall_Tutorial_FCWiki.FCStd?raw=true WhiffleBall_Tutorial_FCWiki.FCStd]


|-
|-
| [[Wikihouse_porting_tutorial|Wikihouse porting tutorial]]
| [[Wikihouse_porting_tutorial|Wikihouse porting tutorial]]
| Wikihouse porting tutorial
| Wikihouse porting tutorial
| Intermediate/Advanced
| Intermediate/Advanced
| 1:00
| 1:00
|
|
|
|
|
|


|}
|}

Revision as of 12:29, 30 May 2022

이 페이지는 고품질 자습서를 제공합니다. 완전한, 정렬되지 않은 목록은 Category:Tutorials에 있습니다.

If you'd like to contribute with writing wiki documentation and tutorials, see the general wiki guidelines in WikiPages, and read the tutorial guidelines.

Please notice the version of FreeCAD used in the tutorial as some tutorials may use an old version of the program. Although the general modelling process may still work, some tools may have changed.

See also video tutorials.

Architecture and BIM

Modeling parts

FreeCAD provides two main workflows to modeling parts:

Please note that the PartDesign Workbench workflow was considerably changed from FreeCAD 0.17 onward; some of the tutorials haven't been updated and may refer to the 0.16 version.

The Raspberry Pi project has made simple tutorials that are easy to follow, particularly for those new to CAD systems:

Drafting and Sketching

Technical Drawings

FEM

CNC & 3D Printing

Rendering

Robot workbench

Development of the Robot Workbench is currently abandoned. Please inquire on our forum regarding any news or alternative workbenches.

Scripting

These are tutorials that are related to scripting or programming. They are geared towards more experienced users, who are already somewhat familiar with the program.

Tutorials - Comprehensive list

Here are listed all the tutorials that are not in the manual regardless of their quality. If a tutorial is listed in the Category:Tutorials and not in this table please insert it.

Tutorial Topic Level Time to complete hh:mm Authors FreeCAD version Example files


Add Button to FEM Toolbar Tutorial Finite Element Analysis JohnWang
Add FEM Constraint Tutorial Finite Element Analysis M42kus
Add FEM Equation Tutorial Finite Element Analysis JohnWang
Aeroplane Part Workbench Beginner 0:10 Hughthecat
Analysis of reinforced concrete with FEM Reinforced concrete with FEM Intermediate 1:00 HarryvL 0.19 or above
Arch panel tutorial Modeling an architectural panel Beginner 1:00 Yorik
Arch tutorial Modeling Intermediate Yorik 0.14
Basic Attachment Tutorial Sketch attachment Beginner/intermediate 1:00 Bance 0.17 and above Basic Attachment Tutorial.FCStd
Basic modeling tutorial Introduction to modelling Beginner 0:15 NormandC Any None
Basic Part Design Tutorial Modeling Beginner Mark Stephen (Quick61) and HarryGeier 0.17 or above Basic Part Design for v0.17
Basic Sketcher Tutorial Sketcher Beginner 1:00 Drei and Vocx 0.19 Basic Sketcher tutorial
Basic TechDraw Tutorial TechDraw Workbench Beginner WandererFan 0.17 and above Basic Part Design for v0.17 Sample Basic TechDraw Tutorial Sample
Code snippets Python Beginner
Creating a simple part with PartDesign Modeling Beginner 1:00 GlouGlou 0.17 or above Creating a simple PartDesign Body.FCStd
Customize Toolbars Beginner 0:05 Mario52 Any None
Draft ShapeString tutorial Product Design Beginner 0:30 r-frank and vocx 0.17 and above Draft_Shapestring_Text
Draft tutorial Drafting Beginner 0:30 Drei and vocx 0.19 Draft tutorial updated
Drawing Template HowTo (obsolete) 2D Drafting Intermediate 1:00 Mark Stephen (Quick61) 0.14.3700 or above None
Drawing tutorial (obsolete) Blueprints / Drawings Beginner 0:15 Drei 0.16 or above
Dxf Importer Install Intermediate 0:05 Mario52 Any None
Engine Block Tutorial Part Workbench Beginner 1:00 Andrewbuck40 0.14.3700
Export to STL or OBJ Export to STL or OBJ Beginner 0:20 r-frank 0.16.6703
Extend FEM Module Finite Element Analysis M42kus
FEM CalculiX Cantilever 3D Finite Element Analysis Beginner 0:10 Bernd 0.16.6377 or above
FEM Shear of a Composite Block Finite Element Analysis Beginner/Intermediate 0:300 HarryvL 0.17.12960 or above
FEM tutorial Finite Element Analysis Beginner 0:10 Drei 0.16.6700 or above
FEM Tutorial Python Finite Element Analysis Intermediate 0:30 Bernd 0.18.15985 or above
FreeCAD-Ship s60 tutorial Ship Workbench Beginner
FreeCAD-Ship s60 tutorial (II) Ship Workbench Beginner
How to install additional workbenches Programming Medium programmer 0:15 r-frank Any None
How to install macros Programming Medium programmer 0:15 Mario52 Any None
Import from STL or OBJ Import from STL or OBJ Beginner 0:30 r-frank 1.0 0.16.6703
Import OpenSCAD code Import OpenSCAD code Beginner 0:30 r-frank 0.16.6704 None
Import text and geometry from Inkscape Import text and geometry from Inkscape Beginner 0:30 r-frank 0.16.6704
Import/Export IFC - compiling IfcOpenShell Arch Workbench Advanced 2:00 Pablo Gil
Measurement Of Angles On Holes TechDraw Workbench Beginner 0:01 AnHi 0.19
PartDesign Bearingholder Tutorial I Product design - Bearingholder #1 Beginner 1:00 NormandC
PartDesign Bearingholder Tutorial II Product design - Bearingholder #2 Beginner 1:00 NormandC
PartDesign tutorial Sketcher Beginner 0:15 Drei 0.16 or above
Path Walkthrough for the Impatient Path Workbench Chrisb
Plot Basic tutorial Plot Workbench Basic Tutorial Beginner
Plot MultiAxes tutorial Plot workbench Intermediate
Post-Processing of FEM Results with Paraview Post-Processing of FEM Results with ParaView Intermediate 2:00 HarryvL 0.19 Beam and wall
Python scripting tutorial Programming Intermediate
Raytracing tutorial Raytracing Beginner 0:010 Drei 0.16 or above
Robot 6-Axis Robot Workbench Intermediate
Robot tutorial Robot Workbench Beginner r-frank
Scripted Parts: Ball Bearing - Part 1 Part Scripting - Ball Bearing #1 Beginner 0:30 r-frank 0.16.6706
Scripted Parts: Ball Bearing - Part 2 Part Scripting - Ball Bearing #2 Beginner 0:30 r-frank 0.16.6706
Scripts Scripting Beginner onekk Carlo 0.19
Sketcher Micro Tutorial - Constraint Practices Sketcher Beginner 0:30 Mark Stephen (Quick61) and vocx 0.19 Sketcher Constraints practices
Sketcher reference
Sketcher requirement for a sketch Sketcher Beginner Maker None
Sketcher Tutorial Sketcher Beginner Ulrich
TechDraw Pitch Circle Tutorial TechDraw Workbench Beginner 0:10 Andergrin 0.19 None
TechDraw TemplateGenerator TechDraw Workbench Intermediate FBXL5 0.19 None
TechDraw TemplateHowTo TechDraw Workbench Intermediate 1:00 wandererfan 0.17 None
Thread for Screw Tutorial Product design Advanced 1:00 DeepSOIC, Murdic, vocx 0.19 Updated: Thread for screw tutorial
Toothbrush Head Stand Modeling Beginner 1:00 EmmanuelG 0.16 or above Thingiverse 2403310
Topological data scripting Programming Intermediate
Transient FEM analysis Transient FEM analysis
Tutorial custom placing of windows and doors Architecture Intermediate 1:00 Vocx 0.18 or above None
Tutorial for open windows Architecture Beginner 1:00 Vocx 0.18 or above None
Tutorial FreeCAD POV ray Rendering Intermediate 2:00 Vocx 0.18 or above None
Tutorial KinematicAssembly Assemly3 Beginner 0:30 FBXL5 0.20 or above None
Tutorial KinematicController Programming Intermediate 1:00 FBXL5 0.20 or above None
Tutorial Render with Blender Rendering Intermediate 1:00 Vocx 0.18 or above None
VRML Preparation for Robot Simulation Robot Workbench Intermediate 0.11.4252ppa1
Washers None
Whiffle Ball tutorial Product design Beginner 0:30 r-frank and vocx 0.17 and above WhiffleBall_Tutorial_FCWiki.FCStd
Wikihouse porting tutorial Wikihouse porting tutorial Intermediate/Advanced 1:00