TechDraw HoleShaftFit: Difference between revisions

From FreeCAD Documentation
No edit summary
(Usage)
 
(One intermediate revision by the same user not shown)
Line 15: Line 15:
{{GuiCommand
{{GuiCommand
|Name=TechDraw HoleShaftFit
|Name=TechDraw HoleShaftFit
|MenuLocation=TechDraw → Add hole or shaft fit
|MenuLocation=TechDraw → Symbols → Add hole or shaft fit
|Workbenches=[[TechDraw_Workbench|TechDraw]]
|Workbenches=[[TechDraw_Workbench|TechDraw]]
|Version=0.21
|Version=0.21
Line 36: Line 36:
<!--T:7-->
<!--T:7-->
# Select a single linear dimension ([[TechDraw_LengthDimension|length]], [[TechDraw_HorizontalDimension|horizontal]] or [[TechDraw_VerticalDimension|vertical]]) or a single [[TechDraw_DiameterDimension|diameter]] dimension.
# Select a single linear dimension ([[TechDraw_LengthDimension|length]], [[TechDraw_HorizontalDimension|horizontal]] or [[TechDraw_VerticalDimension|vertical]]) or a single [[TechDraw_DiameterDimension|diameter]] dimension.
# There are several ways to invoke the tool:
# Press the {{Button|[[Image:TechDraw_HoleShaftFit.svg|16px]] [[TechDraw_HoleShaftFit|Add hole or shaft fit]]}} button.
#* Press the {{Button|[[Image:TechDraw_HoleShaftFit.svg|16px]] [[TechDraw_HoleShaftFit|Add hole or shaft fit]]}} button.
#* Select the {{MenuCommand|TechDraw → Symbols → [[Image:TechDraw_HoleShaftFit.svg|16px]] Add hole or shaft fit}} option from the menu.
# A task panel opens.
# A task panel opens.
# Specify {{MenuCommand|shaft fit}} or {{MenuCommand|hole fit}} as applicable.
# Specify {{MenuCommand|shaft fit}} or {{MenuCommand|hole fit}} as applicable.

Latest revision as of 09:21, 26 July 2023

Other languages:

TechDraw HoleShaftFit

Menu location
TechDraw → Symbols → Add hole or shaft fit
Workbenches
TechDraw
Default shortcut
None
Introduced in version
0.21
See also
TechDraw Geometric dimensioning and tolerancing

Description

The TechDraw HoleShaftFit tool adds hole or shaft tolerances using ISO 286 to a linear dimension or a diameter dimension.

On the left the task panel, on the right some added tolerances

Usage

  1. Select a single linear dimension (length, horizontal or vertical) or a single diameter dimension.
  2. There are several ways to invoke the tool:
    • Press the Add hole or shaft fit button.
    • Select the TechDraw → Symbols → Add hole or shaft fit option from the menu.
  3. A task panel opens.
  4. Specify shaft fit or hole fit as applicable.
  5. Select the desired ISO 286 fit option from the combo box. The corresponding field and the fit type (loose fit, snug fit or press fit) are updated.
  6. Press the OK button.
  7. The selected option and the calculated tolerance values are added to the dimension.