Std Vue en rotation

From FreeCAD Documentation
Revision as of 13:19, 8 May 2020 by David69 (talk | contribs) (Created page with "{{Caption|La boîte de dialogue Vue en rotation}}")

Std Vue en rotation

Emplacement du menu
Outils → Vue en rotation...
Ateliers
Tous
Raccourci par défaut
Aucun
Introduit dans la version
-
Voir aussi
Aucun

Description

La commande Std Vue en rotation fera tourner la caméra en continu dans une vue 3D.

La boîte de dialogue Vue en rotation

Usage

  1. Select the Tools → View turntable... option from the menu.
  2. The View Turntable dialog box opens.
  3. Move the Angle slider to tilt the camera's virtual turn table.
  4. Move the Speed slider to adjust the rotation speed of the camera.
  5. Check the Fullscreen checkbox to switch the 3D view to fullscreen mode.
  6. The Enable timer option is not supported at this time.
  7. Press the Play button. The button will stay pushed in and its text will change to Stop.
  8. In fullscreen mode the dialog will disappear after ca. 5 seconds. It will reappear if the mouse is moved over the 3D view.
  9. Press the Stop button to stop the camera rotation.
  10. Optionally change settings and restart.
  11. Press the Close button to close the dialog box.

Notes