Sketcher Snap/de: Difference between revisions

From FreeCAD Documentation
(Created page with "==Anwendung==")
(Created page with "Der Befehl '''Sketcher Einrasten''' schaltet den Einrastmodus für alle Skizzen ein bzw. aus. Einzelne Einstellungen können im zugehörigen Menü angepasst werden.")
Line 21: Line 21:
==Beschreibung==
==Beschreibung==


Der Befehl '''Sketcher Einrasten''' schaltet den Einrastmodus für alle Skizzen ein bzw. aus. Einzelne Einstellungen können im zugehörigen Menü angepasst werden.
<div lang="en" dir="ltr" class="mw-content-ltr">
The '''Sketcher Snap''' command toggles snapping in all sketches. Individual snaps and settings can be changed in the related menu.
</div>


<div lang="en" dir="ltr" class="mw-content-ltr">
<div lang="en" dir="ltr" class="mw-content-ltr">

Revision as of 12:35, 22 August 2023

Other languages:

Sketcher Einrasten

Menüeintrag
Keiner
Arbeitsbereich
Sketcher
Standardtastenkürzel
Keiner
Eingeführt in Version
0.21
Siehe auch
Sketcher Raster

Beschreibung

Der Befehl Sketcher Einrasten schaltet den Einrastmodus für alle Skizzen ein bzw. aus. Einzelne Einstellungen können im zugehörigen Menü angepasst werden.

Snapping only works while creating geometry. Note that snapping is just a drawing aid, it does not produce additional constraints.

Anwendung

  1. Press the Toggle snap button to toggle snapping.
  2. optionally click on the down arrow to the right of the button to open the menu. The settings in this menu can only be changed if snapping is switched on:
    • If the Snap to grid checkbox is checked, the cursor will snap to grid lines and grid intersections. Also works if the grid is invisible.
    • If the Snap to objects checkbox is checked, the cursor will snap to edges of geometry and midpoints of lines and arcs.
    • Snap angle specifies the angle for angular snap. Snapping will occur at multiples of this value starting from the direction of the positive X axis of the sketch. The Ctrl key must be held down for this snap. Only works when creating certain geometry, lines for example.