Sketcher SkizzeAusrichten

From FreeCAD Documentation
Revision as of 22:29, 31 October 2020 by Maker (talk | contribs) (Created page with "{{Docnav/de |Skizze zu Fläche zuordnen |Skizze überprüfen |Skizzierer |IconL=Sketcher_Map...")

Sketcher Reorient

Menüeintrag
Part design → Reorient sketch
Arbeitsbereich
Sketcher, PartDesign
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
Map sketch, New Sketch

Description

Allows you to detach a sketch from a face and attach it to one of the main planes (with an offset).

Usage

  1. Select the sketch to be re-oriented in the tree-view
  2. Choose Sketch → Reorient sketch from the top menu.
  3. A menu will pop up and ask you if you want to detach the sketch from its face
  4. Selecting Yes will give you the same menu as in Sketch → New Sketch.
  5. You can attach the sketch to one of the main planes
  6. You also have the possibility to add a positive or negative offset

Notes

  • When selecting Cancel in the second menu the sketch is simply detached from its face.
  • As long as no sketch is selected, the command is greyed out.