Sketcher RectangularArray: Difference between revisions

From FreeCAD Documentation
mNo edit summary
No edit summary
Line 29: Line 29:


<!--T:6-->
<!--T:6-->
# Select sketcher elements in [[task_panel|task panel]] or in [[3D_view|3D view]].
# Select sketcher elements in [[Task_panel|task panel]] or in [[3D_view|3D view]].
# There are several ways to invoke the command:
# There are several ways to invoke the command:
#* Press the {{Button|[[File:Sketcher_RectangularArray.svg|16px]] [[Sketcher_RectangularArray|Rectangular array]]}} button.
#* Press the {{Button|[[File:Sketcher_RectangularArray.svg|16px]] [[Sketcher_RectangularArray|Rectangular array]]}} button.

Revision as of 15:30, 16 January 2023

Sketcher RectangularArray

Menu location
Sketch → Sketcher tools → Rectangular array
Workbenches
Sketcher
Default shortcut
Z A
Introduced in version
0.16
See also
None

Description

Creates an array of selected sketcher elements.

Usage

  1. Select sketcher elements in task panel or in 3D view.
  2. There are several ways to invoke the command:
    • Press the Rectangular array button.
    • Select the Sketch → Sketcher tools → Rectangular array option from the menu.
  3. Specify the options for the array in the dialog that opens.
  4. Press the OK button.
  5. Move the mouse in the 3D view towards the desired reference point.
    By keeping Ctrl pressed, the angle to the reference point can be fixed in steps of 5°. introduced in version 0.20
  6. Left-click in the 3D view to create the array.
  7. To set the distances between the array elements, edit the dimensional constraints of the array.

Options

Rectangular array has the following options:

  • Colums: The number of columns for the array.
  • Rows: The number of rows for the array.
  • Equal vertical/horizontal spacing: If the vertical distance between the array elements should be the same as the horizontal distance.
  • Constrain inter-element separation: When this is checked, the distance between the array elements will be constrained.
    If you for example only know that you need a 23 x 15 mm array, use this option to later be able to change these constraints to the dimensions you need.
  • Clone: ??