Sketcher CreatePoint: Difference between revisions

From FreeCAD Documentation
(Removed the image. It was not very relevant and the current cursor tool icon looks different.)
No edit summary
Line 43: Line 43:
# If the tool runs in [[Sketcher_Workbench#Continue_modes|continue mode]]:
# If the tool runs in [[Sketcher_Workbench#Continue_modes|continue mode]]:
## Optionally keep creating points.
## Optionally keep creating points.
## To finish, right-click or press {{KEY|Esc}}, or start another constraints or geometries tool.
## To finish, right-click or press {{KEY|Esc}}, or start another geometry or constraint creation tool.


==Notes==
==Notes==

Revision as of 19:35, 6 March 2024

This documentation is a work in progress. Please don't mark it as translatable since it will change in the next hours and days.

Sketcher CreatePoint

Menu location
Sketch → Sketcher geometries → Create point
Workbenches
Sketcher
Default shortcut
G Y
Introduced in version
-
See also
None

Description

The Sketcher CreatePoint tool creates a point.

Usage

See also: Drawing aids.

Pos-OVP = Positional On-View-Parameters. introduced in version 0.22

  1. There are several ways to invoke the tool:
    • Press the Create point button.
    • Select the Sketcher → Sketcher geometries → Create point option from the menu.
    • Right-click in the 3D view and select the Create point option from the context menu.
    • Use the keyboard shortcut: G then Y.
  2. The cursor changes to a white cross with the tool icon.
  3. Pick a point. Or with Pos-OVP: enter its X and/or Y coordinate.
  4. The point is created and applicable Pos-OVP based constraints are added.
  5. If the tool runs in continue mode:
    1. Optionally keep creating points.
    2. To finish, right-click or press Esc, or start another geometry or constraint creation tool.

Notes

  • Points are always created as construction geometry. Optionally change them to normal geometry with Sketcher ToggleConstruction to make them visible outside of Sketch editing mode.