Part CrossSections/ru: Difference between revisions

From FreeCAD Documentation
No edit summary
(Created page with "{{Docnav/ru |Разделить |3D Offset...Tools |Верстак Part |IconL=Part_Section.svg |IconR=Pa...")
Line 1: Line 1:
<languages/>
<languages/>
{{Docnav
{{Docnav/ru
|[[Part_Section|Section]]
|[[Part_Section/ru|Разделить]]
|[[Part_CompOffsetTools|CompOffsetTools]]
|[[Part_CompOffsetTools/ru|3D Offset...Tools]]
|[[Part_Workbench|Part]]
|[[Part_Workbench/ru|Верстак Part]]
|IconL=Part_Section.svg
|IconL=Part_Section.svg
|IconR=Part_CompOffsetTools.png
|IconR=Part_CompOffsetTools.png

Revision as of 15:27, 31 August 2021

Поперечные сечения

Системное название
Part SectionCross
Расположение в меню
Деталь → Поперечные сечения
Верстаки
Part,Complete
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Нет

Description

The Cross-sections utility creates one or more cross-sections through the selected shape.

Usage

  1. Select a shape.
  2. Press the Cross-sections button.
  3. Define the guiding plane.
  4. Define the position (height of the cross-section).
  5. Optionally, check Sections to create more than one cross-section:
    • Checking On both sides will distribute the cross-sections on each side of the guiding plane location.
    • Set the count.
  6. Press OK.

Limitations

  • The resulting object is not parametric, that is it is not linked to the original shape.
  • A single object is created, even with more than one cross-section.

Example

Select an object

Dialog window

Result