3D cмещение

From FreeCAD Documentation
This page is a translated version of the page Part Offset and the translation is 30% complete.
Outdated translations are marked like this.

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Смещение 3D

Расположение в меню
Деталь → Смещение 3D
Верстаки
Верстак Part
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Толщина

Описание

The Part Offset tool creates parallel copies of a selected shape at a certain distance from the base shape, giving a new object.

Применение

  1. Select an object to offset.
  2. Press the 3D Offset button.
  3. Adjust distance and parameters depending on the original object and the resulting objects validity.

Notes

Пример

Object with small offset and rounded ( arc ) corners.

Same object with sharp ( intersection ) corners.

Same object with thick distance overfilling the front left gap and allowed intersections.

Arbitrary shape ( draft poly as wire ) with a 3D Offset ( ignores MODE param )

same shape with a 3D Offset as SKIN and filled offset

filled offset with 2 Cylinders creating boolean cuts. Cylinder A goes through the FILL whilst Cylinder B only goes thru the FILL and NOT through the source 2D shape.

Свойства

  • ДанныеOffset: Distance to offset the faces of the shape.
  • ДанныеMode: Mode of creation. Skin creates a new shape around the source shape. Pipe (todo). RectoVerso (todo).
  • ДанныеJoin type: How the new corners are build up. Intersection gives sharp corners by linear extension of the edges. Arc and Tangent give rounded corners.
  1. Option: Intersection: Allows offsets pointing inwards to "overflow" the gap by intersecting the resulting shape until opposite faces are reached.
  2. Option: Self Intersection: (todo).
  3. Option: Fill Offset: When the shape was 2 dimensional, the gap between the 2 shapes gets filled. The fill is now a solid, hence the source shape is not a solid. Thus boolean operations may lead to strange results. (see example below).