From FreeCAD Documentation
This page is a translated version of the page Part Box and the translation is 15% complete.
Outdated translations are marked like this.


Расположение в меню
Деталь → Примитивы → Куб
Быстрые клавиши
Представлено в версии
См. также
Создать примитивы



Команда Куб из верстака Part добавляет параметрический геометрический примитив [1] в текущий документ. По умолчанию, команда добавляет куб с ярлыком "Куб" со сторонами 10х10х10 мм и располагает его в центре системы координат. Эти параметры могут быть изменены после добавления объекта.


  1. There are several ways to invoke the command:
    • Press the Part Box button.
    • Select the Part → Primitives → Cube option from the menu.
  2. The box is created.
  3. Optionally change the dimensions and ДанныеPlacement of the box by doing one of the following:
    • Double-click the object in the Tree view:
      1. The Geometric Primitives task panel opens.
      2. Change one or more properties.
      3. The object is dynamically updated in the 3D view.
      4. Press the OK button.
    • Change the properties in the Property editor.
    • Change the ДанныеPlacement with the Std TransformManip command.


Part Box from the scripting example

A Part Box object created with the scripting example below is shown here.


  • A Part Box can also be created with the Part Primitives command. With that command you can specify the dimensions and placement at creation time.


See also: Property editor.

A Part Box object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:



The object has the same attachment properties as a Part Part2DObject.


  • ДанныеLength (Length): The length of the box. This is the dimension in its X direction. The default is 10mm.
  • ДанныеWidth (Length): The width of the box. This is the dimension in its Y direction. The default is 10mm.
  • ДанныеHeight (Length): The height of the box. This is dimension in its Z direction. The default is 10mm.


See also: Autogenerated API documentation, Part scripting and FreeCAD Scripting Basics.

A Part Box can be created with the addObject() method of the document:

box = FreeCAD.ActiveDocument.addObject("Part::Box", "myBox")
  • Where "myBox" is the name for the object.
  • The function returns the newly created object.


import FreeCAD as App

doc = App.activeDocument()

box = doc.addObject("Part::Box", "myBox")
box.Length = 4
box.Width = 8
box.Height = 12
box.Placement = App.Placement(App.Vector(1, 2, 3), App.Rotation(75, 60, 30))