Tutoriale
Această pagină prezintă o selecție de tutoriale scrise de înaltă calitae. O listă completă și nesortată de tutoriale puteți găsi la : Category:Tutorials.
vizitați Offsite tutorials și Video tutorials pentru lista tutorialelor găzduite pe site-uri externe. O sursă utilă de tutoriale video este,YouTube.
If you'd like to contribute with writing wiki documentation and tutorials, see the general wiki guidelines in WikiPages, and read the tutorial guidelines.
Please notice the version of FreeCAD used in the tutorial as some tutorials may use an old version of the program. Although the general modelling process may still work, some tools may have changed.
Architectura și Construcții Civile și industriale
-
Arch tutorial
Basele medelării arhitecturale. -
Arch panel tutorial
Modelarea unui acoperiș în două ape la o casă mică. -
BIM modeling
Cum se face un model de casă mică și produce planul.
Modelarea Pieselor
FreeCAD furnizează două fluxuri de lucru la modelarea pieselor: combinarea obiectelor (o metodă numită constructive solid geometry (CSG)) utilizând Part workbench, sau utilizând metoda de editare feature cu Atelierul PartDesign PartDesign workbench. Vă rugăm să notați că PartDesign work flow s-a schimbat considerabil de la v0.17 încoace: unele dintre tutoriale trebuie updatate.
- combinarea obiectelor, o metodă numită geometrie solidă constructivă (CSG) utilizând Workbench part și
* folosind modelarea parametrică și editarea caracteristică cu Workbench Workbench.
Please note that the PartDesign Workbench workflow was considerably changed from FreeCAD 0.17 onward; some of the tutorials haven't been updated and may refer to the 0.16 version.
-
Creating a simple part with PartDesign
An intro to v0.17 PartDesign workflow -
Basic Part Design Tutorial 017
Model a simple part using a feature editing methodology (updated for version 0.17) -
Model a Toothbrush Head Stand
in PartDesign v0.16 -
Modeling for product design
Modeling a Lego block v0.16 -
Traditional modeling, the CSG way
Model a table using a simple CSG work flow. -
Draft ShapeString tutorial
Create engraved text on a solid. -
Create a Whiffle Ball
from Part primitives. -
Basic modeling tutorial
Create an iron angle in 2 simple methods.
The Raspberry Pi project has made simple tutorials that are easy to follow, particularly for those new to CAD systems:
- freecad-dice, model a die with six faces, and optionally 3D print it.
- freecad-headphone-tidy, model a spool to organize and store earphones, and optionally 3D print it.
- freecad-chess-set, model and entire chess set in Bauhaus modernist style.
- raspberrypilearning repository (CC-BY 4.0) with other examples.
Desen 2 D și Sketching
-
Draft tutorial
Introducerea în atelierul Desen 2 D( Draft workbench) . -
Sketcher tutorial
Introducere în Sketcher. -
Sketcher Micro Tutorial
Învățai să constrângeți eficient un pătrat.
-
-
Basic TechDraw Tutorial
Intro to creating drawings with the TechDraw workbench. -
Creating a new background template
Instructions to create a new page template in Inkscape for using with the TechDraw Workbench.
MEF
-
FEM tutorial
Introducerea în atelierul MEF (FEM workbench).
CNC & 3D Printing
-
Path Walkthrough for the Impatient
Prezentarea rapidă a Atelierului Traiectorie (Path module).
Import și Export
-
Dxf Importer Install
Instalarea manuală a bibliotecii DXF import .
Randare
-
Creating renderings
With POV-Ray and LuxRender. -
Raytracing tutorial
Introduce fluxului de muncă a Atelierului de Randare(Raytracing workbench).
Atelierul Robotică
-
Robot tutorial
simularea mișcării la Robot.
Plotting
-
Basic plot
Draw simple mathematical functions in the Plot Workbench using the underlying Python plotting libraries: define the input list (X), two output lists (Y1, Y2), plot the functions (Y1 and Y2 against X), set the grid, line styles, legends, axes labels, plot title, and save the plot. -
Multiaxes plot
Draw a more complicated plot in the Plot Workbench with two different input lists (X, T), and three output lists (Y1, Y2, Y3), then create two sets of axes in the same plot, and plot the pairs of lists (Y1 against X, and Y2 and Y3 against T); set the axes labels and grid, and move the legends and title.
Scripting
These are tutorials that are related to scripting or programming. They are geared towards more experienced users, who are already somewhat familiar with the program.
Drawings
-
Drawing tutorial
Intro to creating blueprints with the Drawing workbench.
Tutorials - Comprehensive list
Here are listed all the tutorials that are not in the manual regardless of their quality. If a tutorial is listed in the Category:Tutorials and not in this table please insert it.
Tutorial | Topic | Level | Time to complete hh:mm | Authors | FreeCAD version | Example files | UnfinishedDocu
|
---|---|---|---|---|---|---|---|
Add FEM Constraint Tutorial | M42kus | No | |||||
Add FEM Equation Tutorial | M42kus | No | |||||
Aeroplane | Part Workbench | Beginner | 0:10 | Hughthecat | No | ||
Analysis of reinforced concrete with FEM | Reinforced concrete with FEM | Intermediate | 1:00 | HarryvL | 0.19 or above | No | |
Arch panel tutorial | Modeling an architectural panel | Beginner | 1:00 | Yorik | No | ||
Arch tutorial | Modeling | Intermediate | Yorik | 0.14 | No | ||
Basic modeling tutorial | Introduction to modelling | Beginner | 0:15 | NormandC | Any | None | No |
Basic Part Design Tutorial (0.16 and below) | Modeling | Beginner | Mark Stephen (Quick61) | 0.14.3700 to 0.16 | None | No | |
Basic Part Design Tutorial (0.17 and above) | Modeling | Beginner | HarryGeier | 0.17 or above | Basic Part Design for v0.17 | No | |
Basic Sketcher Tutorial | Sketcher | Beginner | 1:00 | Drei and Vocx | 0.19 | Basic Sketcher tutorial | No |
Basic TechDraw Tutorial | Modeling | Beginner | WandererFan | 0.17 and above | Basic Part Design for v0.17 Sample Basic TechDraw Tutorial Sample | No | |
Code snippets | Python | Beginner | No | ||||
Creating a simple part with PartDesign | Modeling | Beginner | 1:00 | GlouGlou | 0.17 or above | Creating a simple PartDesign Body.FCStd | No |
Customize Toolbars | Beginner | 0:05 | Mario52 | Any | None | No | |
Draft ShapeString tutorial | Product Design | Beginner | 0:30 | r-frank and vocx | 0.17 and above | Draft_Shapestring_Text | No |
Draft tutorial | Drafting | Beginner | 0:30 | Drei and vocx | 0.19 | Draft tutorial updated | No |
Draft tutorial Outdated | Drafting | Beginner | |||||
Drawing Template HowTo | 2D Drafting | Intermediate | 1:00 | Mark Stephen (Quick61) | 0.14.3700 or greater or above | None | No |
Drawing tutorial (obsolete) | Blueprints / Drawings | Beginner | 0:15 | Drei | 0.16 or above | No | |
Dxf Importer Install | Intermediate | 0:05 | Mario52 | Any | None | No | |
Engine Block Tutorial | Part Workbench | Beginner | 1:00 | Andrewbuck40 | 0.14.3700 | Yes | |
Export to STL or OBJ | Export to STL or OBJ | Beginner | 0:20 | r-frank | 0.16.6703 | No | |
Extend FEM Module | M42kus | No | |||||
FEM Beginner tutorial | FEM Beginner tutorial | Beginner | thschrader | 0.17.11622+ | Whiffle Ball | Yes | |
FEM CalculiX Cantilever 3D | Finite Element Analysis | Beginner | 0:10 | Bernd | 0.16.6377 or above | No | |
FEM Shear of a Composite Block | Finite Element Analysis | Beginner/Intermediate | 0:300 | HarryvL | 0.17.12960 or above | No | |
FEM tutorial | Finite Element Analysis | Beginner | 0:10 | Drei | 0.16.6700 or above | No | |
FEM Tutorial Python | Finite Element Analysis | Intermediate | 0:30 | Bernd | 0.18.15985 or above | No | |
FreeCAD-Ship s60 tutorial | Ship Workbench | Beginner | No | ||||
FreeCAD-Ship s60 tutorial (II) | Ship Workbench | Beginner | No | ||||
How to install additional workbenches | Programming | Medium programmer | 0:15 | r-frank | Any | None | No |
How to install macros | Programming | Medium programmer | 0:15 | Mario52 | Any | None | No |
Import from STL or OBJ | Import from STL or OBJ | Beginner | 0:30 | r-frank | 1.0 | 0.16.6703 | No |
Import OpenSCAD code | Import OpenSCAD code | Beginner | 0:30 | r-frank | 0.16.6704 | None | No |
Import text and geometry from Inkscape | Import text and geometry from Inkscape | Beginner | 0:30 | r-frank | 0.16.6704 | No | |
Import/Export IFC - compiling IfcOpenShell | Arch Workbench | Advanced | 2:00 | Pablo Gil | No | ||
PartDesign tutorial | Sketcher | Beginner | 0:15 | Drei | 0.16 or above | No | |
Path Core Concepts | Path Workbench | Yes | |||||
Path Customization | Path Workbench | Yes | |||||
Path Postprocessor Customization | Path Workbench | chrisb | No | ||||
Path scripting | Path Workbench | Intermediate | No | ||||
Path Walkthrough for the Impatient | Path Workbench | Chrisb | Yes | ||||
Plot Basic tutorial | Plot Workbench Basic Tutorial | Beginner | No | ||||
Plot MultiAxes tutorial | Plot workbench | Intermediate | No | ||||
Post-Processing of FEM Results with Paraview | Post-Processing of FEM Results with ParaView | Intermediate | 2:00 | HarryvL | 0.19 | [https://forum.freecadweb.org/download/file.php?id=103557 Beam] and wall | No |
Python scripting tutorial | Programming | Intermediate | No | ||||
Raytracing tutorial | Raytracing | Beginner | 0:010 | Drei | 0.16 or above | No | |
Robot 6-Axis | Robot Workbench | Intermediate | No | ||||
Robot tutorial | Robot Workbench | Beginner | r-frank | No | |||
Scripted Parts: Ball Bearing - Part 1 | Part Scripting - Ball Bearing #1 | Beginner | 0:30 | r-frank | 0.16.6706 | No | |
Scripted Parts: Ball Bearing - Part 2 | Part Scripting - Ball Bearing #2 | Beginner | 0:30 | r-frank | 0.16.6706 | No
| |
PartDesign Bearingholder Tutorial I | Product design - Bearingholder #1 | Beginner | 60 minutes | NormandC | No
| ||
PartDesign Bearingholder Tutorial II | Product design - Bearingholder #2 | Beginner | 60 minutes | NormandC | No
| ||
Scripts | Scripting | Beginner | onekk Carlo | 0.19 | No | ||
Simple Box Cover | Modeling | Beginner | 0:20 | Normand C | 0.14.3700 | Yes | |
Sketcher Micro Tutorial - Constraint Practices | Sketcher | Beginner | 0:30 | Mark Stephen (Quick61) and vocx | 0.19 | Sketcher Constraints practices | No |
Sketcher reference | No | ||||||
Sketcher requirement for a sketch | Sketcher | Beginner | Maker | None | No | ||
Sketcher Tutorial | Sketcher | Beginner | Ulrich | No | |||
TechDraw TemplateHowTo | Drafting | Intermediate | 1:00 | wandererfan | 0.17 | None | No |
Thread for Screw Tutorial | Product design | Advanced | 1:00 | DeepSOIC, Murdic, vocx | 0.19 | Updated: Thread for screw tutorial | No |
Toothbrush Head Stand | Modeling | Beginner | 1:00 | EmmanuelG | 0.16 or greater | Thingiverse 2403310 | No |
Topological data scripting | Programming | Intermediate | No | ||||
Transient FEM analysis | Transient FEM analysis | Yes | |||||
Tutorial custom placing of windows and doors | Architecture | Intermediate | 1:00 | Vocx | 0.18 or above | None | No |
Tutorial for open windows | Architecture | Beginner | 1:00 | Vocx | 0.18 or above | None | No |
Tutorial FreeCAD POV ray | Rendering | Intermediate | 2:00 | Vocx | 0.18 or above | None | No |
Tutorial Render with Blender | Rendering | Intermediate | 1:00 | Vocx | 0.18 or above | None | No |
VRML Preparation for Robot Simulation | Robot Workbench | Intermediate | 0.11.4252ppa1 | No | |||
Washers | None | Yes | |||||
Whiffle Ball tutorial | Product design | Beginner | 0:30 | r-frank and vocx | 0.17 and above | WhiffleBall_Tutorial_FCWiki.FCStd | No |
Wikihouse porting tutorial | Wikihouse porting tutorial | Intermediate/Advanced | 1:00 | No |
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub