Куб
Куб |
Системное название |
---|
Part Box |
Расположение в меню |
Деталь → Примитивы → Куб |
Верстаки |
Part, Complete |
Быстрые клавиши |
Нет |
Представлено в версии |
- |
См. также |
Создать примитивы |
Описание
Команда Куб из верстака Part добавляет параметрический геометрический примитив [1]. По умолчанию, команда добавляет куб с меткой "Куб" со стороной 10мм и располагает его в начале координат. Параметры могут быть изменены после добавления объекта.
Использование
- Переключитесь на верстак Part
- Выполните команду одним из способов:
Options
- Via the Property Editor:
- Length: Set the length distance for your Box object (default is 10 mm).
- Width: Set the width distance for your Box object (default is 10 mm).
- Height: Set the height distance for your Box object (default is 10 mm).
- Placement: Specifies the orientation and position of the Box in the 3D space. See Placement. The reference point is the left front lower corner of the box.
- Label: The Label is the name given to the operation. This name can be changed at your convenience.
Properties
Base
- ДанныеPlacement: Specifies the orientation and position of the Box in the 3D space. See Placement. The reference point is the left front lower corner of the box.
- ДанныеLabel: Label given to the Box object. Change to suit your needs.
Box
- ДанныеLength: The length parameter is the Box's dimension in the x-direction.
- ДанныеWidth: The width parameter is the Box's dimension in the y-direction.
- ДанныеHeight: The height parameter is the Box's dimension in the z-direction.
Scripting
The Box command can by used in macros and from the python console using the following function:
FreeCAD.ActiveDocument.addObject("Part::Box", "myBox")
- Where "myBox" is the label for the Box object.
- Returns newly created object of type Box.
You can access and modify attributes of the Box object. For example, you may wish to modify the length, width and height parameters.
FreeCAD.ActiveDocument.myBox.Length = 25
FreeCAD.ActiveDocument.myBox.Width = 15
FreeCAD.ActiveDocument.myBox.Height = 30
You can change its placement with:
FreeCAD.ActiveDocument.myBox.Placement = FreeCAD.Placement(FreeCAD.Vector(4, 6, 3), FreeCAD.Rotation(30, 45, 10))
Part
- Примитивы: Куб(Параллелограмм), Конус, Цилиндр, Сфера, Тор, Полый цилиндр,Примитивы, Связующие формы
- Создание и правка: Выдавливание, Построение фигуры вращения, Отражение, Скругление, Фаска, Создать плоскость из граней, Ruled Surface, Профиль, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Создать полый объект, Projection on surface, Прикрепление
- Булевы операции: Соединить, Разорвать связь, Compound Filter, Булевы операции, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Измерительные: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta
Документация пользователя
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework