Sketcher SkizzeAusrichten

From FreeCAD Documentation
Revision as of 22:32, 31 October 2020 by Maker (talk | contribs) (Created page with "Ermöglicht es dir, eine Skizze von einer Fläche zu lösen und sie an einer der Hauptebenen (mit einem Versatz) anzuheften.")

Skizzierer SkizzeNeuorientieren

Menüeintrag
Part design → Neuorientieren Skizze
Arbeitsbereich
Skizzierer, PartDesign
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
Skizzierer Skizze zuordnen, Skizzierer Neue Skizze

Beschreibung

Ermöglicht es dir, eine Skizze von einer Fläche zu lösen und sie an einer der Hauptebenen (mit einem Versatz) anzuheften.

Anwendung

  1. Select the sketch to be re-oriented in the tree-view
  2. Choose Sketch → Reorient sketch from the top menu.
  3. A menu will pop up and ask you if you want to detach the sketch from its face
  4. Selecting Yes will give you the same menu as in Sketch → New Sketch.
  5. You can attach the sketch to one of the main planes
  6. You also have the possibility to add a positive or negative offset

Hinweise

  • When selecting Cancel in the second menu the sketch is simply detached from its face.
  • As long as no sketch is selected, the command is greyed out.