Учебные пособия
На этой странице представлен набор высококачественных письменных руководств. Полный, несортированный список учебных пособий на английском языке можно найти в Category:Tutorials, на русском языке в Category:Tutorials/ru, полный и сортируемый список - в таблице ниже. Посетите offsite tutorials и video tutorials для списков обучающих программ, размещенных на внешних сайтах. Полезным источником видеоуроков является YouTube.
Если вы хотите внести свой вклад с написанием документации и учебников вики, см. Общие рекомендации по вики в WikiPages, и прочитайте tutorial guidelines.
Обратите внимание на версию FreeCAD, используемую в учебнике, поскольку некоторые учебники могут использовать старую версию программы. Хотя общий процесс моделирования все еще может работать, некоторые инструменты могут быть изменены.
Архитектура и BIM
-
Учебник по архитектурному модулю (v0.14)
Это основное введение в верстак Arch. Он обширный и демонстрирует типичный рабочий процесс, начиная с импорта плана в формате DXF и до построения объёмной модели. -
Моделирование BIM
Как смоделировать небольшой дом, создать синьки с помощью TechDraw и экспортировать в IFC. -
Open windows and doors (v0.18)
Как показать окна и двери открытыми в символах для изображения фасада и в плане, и сделать чертёж с помощью TechDraw. -
Проектирование собственных окон (v0.18)
Как нарисовать пользовательские окна и двери используя Sketcher, и настроить их нормали для правильного расположения их на стенах. -
Учебник по архитектурным панелям (v0.15)
Моделирование крышевой панели маленького домика, используя Sketcher, инструменты Window и Panel. -
WikiHouse modelling
Перемоделирование проекта WikiHouse с использованием эскизов и панелей, начиная с импорта сетки, созданной в SketchUp.
Моделирование деталей
FreeCAD предлагает два варианта рабочего процесса для моделирования деталей:
- сочетанием объектов, метод, называемый Конструктивная блочная геометрия (КБГ), используя верстак Part, и
- используя параметрическое моделирование и редактирование параметров с помощью верстака PartDesign.
Имейте в виду, что рабочий процесс верстака PartDesign был значительно изменён начиная с FreeCAD 0.17, некоторые учебники ещё не обновлены и могут описывать версию 0.16.
-
Создание простейшей детали с помощью PartDesign (v0.17)
Введение в работу с PartDesign: трассировка эскизов, используя pad, pocket и перемещение объекта. -
Базовый учебник Part Design (v0.17)
Моделирование простой детали с использованием методологии редактирования свойств: создание эскиза, используя pad, внешних ссылок, pocket и зеркала. -
Модель стойки электрической зубной щётки (v0.16)
Использование нескольких свойств: эскиза, ограничений distance и coincident, pad, внешних ссылок, fillet, chamfer, линейных шаблонов и черновика. -
Моделирование для проектирование продукта (v0.16)
Моделирование блока Лего: эскизы, ограничений вертикальной и горизонтальной дистанции, pad, pocket, внешней ссылки, линейных шаблонов и сборки. -
Традиционное твердотельное моделирование
Моделирование стола использованием простейших тел вроде кубов и цилиндров, и применением к ним бинарных операций (fusions и обрезания). -
Черновое руководство по ShapeString (v0.19)
Создание гравированного текста на твёрдом теле: выдавливание shapestring для превращения его в твёрдое тело, затем бинарное вычитание для вырезания его из другого тела. -
Создание wiffle ball (v0.19)
Использование твердотельных примитивов, вроде кубов и цилиндров, и бинарных операций вроде объединения и резки, для создания выдолбленного шара. -
Руководство базового моделирования
Создание железного уголка двумя методами: используя твердотельные примитивы и бинарных операций (CSG), и выдавливанием плоского профиля. -
Учебник "Аэроплан"
Изучение расположения в FreeCAD созданием модели простого аэроплана. Изучение углов поворота, рыскания (Z), тангажа (Y) и крена (X). -
Учебник резьбы винта (v0.19)
Изучение создания резьбы несколькими способами, включая инструменты Part Helix, PartDesign AdditivePipe, Part Sweep, Part Union, и Part Cut.
Проект Raspberry Pi создал простые в работе учебники, в частности для новичков в системах САПР:
- freecad-dice, моделирование die с шестью гранями, и трёхмерной печатью его.
- freecad-headphone-tidy, моделирование катушки для хранения наушников, и трёхмерная печать его.
- freecad-chess-set, моделирование полного шахматного набора в стиле Bauhaus modernist.
- raspberrypilearning хранилище (CC-BY 4.0) с прочими примерами.
Черчение и эскизирование
-
Traditional 2D drafting
Draw a floor plan with lines, wires, rectangles, circular arcs, and add hatch patterns, annotations, and dimensions. Export the result to DXF. -
Draft tutorial (v0.19)
This is a basic introduction to the tools of the Draft Workbench: working plane, grid, line, arc, upgrade, rectangle, circle, polygon, arrays, dimensions, annotations, and shapestring. -
Sketcher reference (v0.18)
This is a 70-page long PDF document that serves as a detailed manual for the Sketcher Workbench. It explains the basics of Sketcher usage, and goes into a lot of detail about the creation of geometrical shapes, and each of the constraints. -
Basic Sketcher Tutorial (v0.19)
This is a basic introduction to the tools of the Sketcher Workbench: construction mode, line, circle, arc, constraints (equality, vertical, horizontal, tangential, distance, angle, radius). -
Sketcher constraints practices (v0.19)
Learn to efficiently constrain a sketch. Prefer geometric constraints over datum constraints.
Технические чертежи
-
Basic TechDraw Tutorial (v0.17)
This is the essential introduction to the tools of the TechDraw Workbench: page, view, scale, vertical and horizontal dimensions, annotations, projection groups, linking dimensions to the 3D view. -
Creating a new background template (v0.17)
Instructions to create a page template in Inkscape for using it with the TechDraw Workbench. Determine the size of the sheet, draw a frame for the page, define fixed text, and editable text fields. -
Measurement Of Angles On Holes (v0.19_pre)
Instructions for adding center lines and subsequent angle representations on holes.
FEM (расчёт методом конечных элементов)
-
CalculiX cantilever FEM analysis (v0.17)
This in an example included in every installation of FreeCAD; it demonstrates a basic analysis with the CalculiX FE solver. Purge the current result, re-run the solver, and view the displacements and stresses in the deformed mesh in the viewport. -
Simple FEM introduction (v0.17)
This is a short introduction to the steps required to perform an analysis in the FEM Workbench: model your object, create a mesh, add constraints and forces, add a material, run the solver, and visualize the results. -
FEM shear analysis of a composite block (v0.17)
Study the deformation of a block made of a hard nucleus surrounded by a softer material: create mesh regions, add materials, set up sliding constraints, add shear loads, run the solver, and visualize the results with a clip plane. -
Analysis of reinforced concrete with FEM (v0.19)
Estimate the level of reinforcement required in a concrete structure to prevent brittle failure under tension or shear. -
Post-Processing of FEM results with Paraview (v0.19)
This tutorial explains the basics of transferring data from the FEM Workbench to Paraview and shows some of the options and settings for displaying data.
ЧПУ и печать в 3D
-
Path Workbench for the impatient
This is a quick presentation of the workflow for the Path Workbench: create a job, define the output, define the milling tool, define the path operations, start the simulation, and generate a G-code output file. -
Preparing models for 3D printing (v0.16)
Convert a solid object to a mesh object using the Mesh Workbench, export the mesh to STL format, and use Slic3r to prepare the G-code. Alternatively use the Cura Workbench or the Path Workbench to generate the G-code.
Импорт и экспорт
-
Установка DXF importer
Установка в вашей системе программы DXF importer для открытия файлов DXF и DWG с помощью FreeCAD.
Визуализация
-
Creating renderings
Quickly produce a rendered image of your bodies with POV-Ray and LuxRender, if they are installed in your system. -
Raytracing tutorial (v0.16)
Describes the basic workflow of the Raytracing Workbench using POV-Ray or LuxRender: set the path to the renderers, create a project, set the camera position, select the model, run the renderer. -
Intermediate FreeCAD and POV-ray tutorial (v0.18)
Workflow to produce a better render with POV-Ray: create a project, add objects, set the camera, save the .pov file, manually edit the file to improve the textures, planes, lights, and then run the renderer. -
Rendering a FreeCAD assembly with Blender (v0.18)
Export bodies from FreeCAD to Wavefront .obj, import the file into Blender, set up a simple Sun light, assign basic materials with the Principled BSDF shader, and produce a rendered image with EEVEE and Cycles.
Robot workbench
-
Robot tutorial (v0.17)
Simulate the movement of an industrial robot: set up a trajectory, set up home position, change the robot position, insert various waypoints, and simulate the robot movement.
Графики
-
Basic plot
Draw simple mathematical functions in the Plot Workbench using the underlying Python plotting libraries: define the input list (X), two output lists (Y1, Y2), plot the functions (Y1 and Y2 against X), set the grid, line styles, legends, axes labels, plot title, and save the plot. -
Multiaxes plot
Draw a more complicated plot in the Plot Workbench with two different input lists (X, T), and three output lists (Y1, Y2, Y3), then create two sets of axes in the same plot, and plot the pairs of lists (Y1 against X, and Y2 and Y3 against T); set the axes labels and grid, and move the legends and title.
Черчение
-
Drawing tutorial (v0.16)
This is the essential introduction to the tools of the Drawing Workbench to create blueprints. -
Generating 2D drawings (v0.16)
Generate 2D projections of your 3D models, and add dimensions.
Учебники - Полный список
Здесь перечислены все учебники, которых нет в руководстве независимо от их качества. Если учебник имеется в Category:Tutorials, но нет в таблице, вставьте его сюда.
Учебник | Тема | Уровень | Время изучения чч:мм | Авторы | Версия FreeCAD | Файлы примеров | UnfinishedDocu
|
---|---|---|---|---|---|---|---|
Add FEM Constraint Tutorial | M42kus | No | |||||
Add FEM Equation Tutorial | M42kus | No | |||||
Aeroplane | Part Workbench | Beginner | 0:10 | Hughthecat | No | ||
Analysis of reinforced concrete with FEM | Reinforced concrete with FEM | Intermediate | 1:00 | HarryvL | 0.19 or above | No | |
Arch panel tutorial | Modeling an architectural panel | Beginner | 1:00 | Yorik | No | ||
Arch tutorial | Modeling | Intermediate | Yorik | 0.14 | No | ||
Basic modeling tutorial | Introduction to modelling | Beginner | 0:15 | NormandC | Any | None | No |
Basic Part Design Tutorial (0.16 and below) | Modeling | Beginner | Mark Stephen (Quick61) | 0.14.3700 to 0.16 | None | No | |
Basic Part Design Tutorial (0.17 and above) | Modeling | Beginner | HarryGeier | 0.17 or above | Basic Part Design for v0.17 | No | |
Basic Sketcher Tutorial | Sketcher | Beginner | 1:00 | Drei and Vocx | 0.19 | Basic Sketcher tutorial | No |
Basic TechDraw Tutorial | Modeling | Beginner | WandererFan | 0.17 and above | Basic Part Design for v0.17 Sample Basic TechDraw Tutorial Sample | No | |
Code snippets | Python | Beginner | No | ||||
Creating a simple part with PartDesign | Modeling | Beginner | 1:00 | GlouGlou | 0.17 or above | Creating a simple PartDesign Body.FCStd | No |
Customize Toolbars | Beginner | 0:05 | Mario52 | Any | None | No | |
Draft ShapeString tutorial | Product Design | Beginner | 0:30 | r-frank and vocx | 0.17 and above | Draft_Shapestring_Text | No |
Draft tutorial | Drafting | Beginner | 0:30 | Drei and vocx | 0.19 | Draft tutorial updated | No |
Draft tutorial Outdated | Drafting | Beginner | |||||
Drawing Template HowTo | 2D Drafting | Intermediate | 1:00 | Mark Stephen (Quick61) | 0.14.3700 or greater or above | None | No |
Drawing tutorial (obsolete) | Blueprints / Drawings | Beginner | 0:15 | Drei | 0.16 or above | No | |
Dxf Importer Install | Topic | Intermediate | 0:05 | Mario52 | Any | None | No |
Engine Block Tutorial | Part Workbench | Beginner | 1:00 | Andrewbuck40 | 0.14.3700 | Yes | |
Export to STL or OBJ | Export to STL or OBJ | Beginner | 0:20 | r-frank | 0.16.6703 | No | |
Extend FEM Module | M42kus | No | |||||
FEM Beginner tutorial | FEM Beginner tutorial | Beginner | thschrader | 0.17.11622+ | Whiffle Ball | Yes | |
FEM CalculiX Cantilever 3D | Finite Element Analysis | Beginner | 0:10 | Bernd | 0.16.6377 or above | No | |
FEM Shear of a Composite Block | Finite Element Analysis | Beginner/Intermediate | 0:300 | HarryvL | 0.17.12960 or above | No | |
FEM tutorial | Finite Element Analysis | Beginner | 0:10 | Drei | 0.16.6700 or above | No | |
FEM Tutorial Python | Finite Element Analysis | Intermediate | 0:30 | Bernd | 0.18.15985 or above | No | |
FreeCAD-Ship s60 tutorial | Ship Workbench | Beginner | No | ||||
FreeCAD-Ship s60 tutorial (II) | Ship Workbench | Beginner | No | ||||
How to install additional workbenches | Programming | Medium programmer | 0:15 | r-frank | Any | None | No |
How to install macros | Programming | Medium programmer | 0:15 | Mario52 | Any | None | No |
Import from STL or OBJ | Import from STL or OBJ | Beginner | 0:30 | r-frank | 1.0 | 0.16.6703 | No |
Import OpenSCAD code | Import OpenSCAD code | Beginner | 0:30 | r-frank | 0.16.6704 | None | No |
Import text and geometry from Inkscape | Import text and geometry from Inkscape | Beginner | 0:30 | r-frank | 0.16.6704 | No | |
Import/Export IFC - compiling IfcOpenShell | Arch Workbench | Advanced | 2:00 | Pablo Gil | No | ||
PartDesign tutorial | Sketcher | Beginner | 0:15 | Drei | 0.16 or above | No | |
Path Core Concepts | Path Workbench | Yes | |||||
Path Customization | Path Workbench | Yes | |||||
Path Postprocessor Customization | Path Workbench | chrisb | No | ||||
Path scripting | Path Workbench | Intermediate | No | ||||
Path Walkthrough for the Impatient | Path Workbench | Chrisb | Yes | ||||
Plot Basic tutorial | Plot Workbench Basic Tutorial | Beginner | No | ||||
Plot MultiAxes tutorial | Plot workbench | Intermediate | No | ||||
Post-Processing of FEM Results with Paraview | Post-Processing of FEM Results with ParaView | Intermediate | 2:00 | HarryvL | 0.19 | [https://forum.freecadweb.org/download/file.php?id=103557 Beam] and wall | No |
Python scripting tutorial | Programming | Intermediate | No | ||||
Raytracing tutorial | Raytracing | Beginner | 0:010 | Drei | 0.16 or above | No | |
Robot 6-Axis | Robot Workbench | Intermediate | No | ||||
Robot tutorial | Robot Workbench | Beginner | r-frank | No | |||
Scripted Parts: Ball Bearing - Part 1 | Part Scripting - Ball Bearing #1 | Beginner | 0:30 | r-frank | 0.16.6706 | No | |
Scripted Parts: Ball Bearing - Part 2 | Part Scripting - Ball Bearing #2 | Beginner | 0:30 | r-frank | 0.16.6706 | No | |
Scripts | Scripting | Beginner | onekk Carlo | 0.19 | No | ||
Simple Box Cover | Modeling | Beginner | 0:20 | Normand C | 0.14.3700 | Yes | |
Sketcher Micro Tutorial - Constraint Practices | Sketcher | Beginner | 0:30 | Mark Stephen (Quick61) and vocx | 0.19 | Sketcher Constraints practices | No |
Sketcher reference | No | ||||||
Sketcher requirement for a sketch | Sketch | Beginner | Maker | None | No | ||
Sketcher Tutorial | Sketcher | Beginner | Ulrich | No | |||
TechDraw TemplateHowTo | Drafting | Intermediate | 1:00 | wandererfan | 0.17 | None | No |
Thread for Screw Tutorial | Product design | Advanced | 1:00 | DeepSOIC, Murdic, vocx | 0.19 | Updated: Thread for screw tutorial | No |
Toothbrush Head Stand | Modeling | Beginner | 1:00 | EmmanuelG | 0.16 or greater | Thingiverse 2403310 | No |
Topological data scripting | Programming | Intermediate | No | ||||
Transient FEM analysis | Transient FEM analysis | Yes | |||||
Tutorial custom placing of windows and doors | Architecture | Intermediate | 1:00 | Vocx | 0.18 or above | None | No |
Tutorial for open windows | Architecture | Beginner | 1:00 | Vocx | 0.18 or above | None | No |
Tutorial FreeCAD POV ray | Rendering | Intermediate | 2:00 | Vocx | 0.18 or above | None | No |
Tutorial Render with Blender | Rendering | Intermediate | 1:00 | Vocx | 0.18 or above | None | No |
VRML Preparation for Robot Simulation | Robot Workbench | Intermediate | 0.11.4252ppa1 | No | |||
Washers | None | Yes | |||||
Whiffle Ball tutorial | Product design | Beginner | 0:30 | r-frank and vocx | 0.17 and above | WhiffleBall_Tutorial_FCWiki.FCStd | No |
Wikihouse porting tutorial | Wikihouse porting tutorial | Intermediate/Advanced | 1:00 | No |
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework