Std Vue de l'arrière

From FreeCAD Documentation
Revision as of 15:07, 1 December 2019 by David69 (talk | contribs) (Created page with "{{GuiCommand/fr |Name=Std ViewRear |Name/fr=Std Vue de l'arrière |MenuLocation=Affichage → Vues standards → Arrière |Workbenches=All |Shortcut=4 |Se...")
Other languages:

Std Vue de l'arrière

Emplacement du menu
Affichage → Vues standards → Arrière
Ateliers
All
Raccourci par défaut
4
Introduit dans la version
-
Voir aussi
Vue de dessous, Vue de gauche

Description

Std ViewRear puts the camera in the 3D view looking towards the front from the back, in the direction of the negative Y axis, [0.0, -1.0, 0.0].

The rear view sets the camera looking to the front, in the direction of the negative Y axis.

How to use

  • Go to the menu View → Standard views → Rear.
  • Or press the Rear button.
  • Or press 4 in the numerical pad of the keyboard.

Scripting

The rear view can be set from the Python console.

It is a method of the ActiveView of the ActiveDocument. The ActiveView only exists when the graphical interface is available; it does not exist when FreeCAD is used in purely console mode.

import FreeCADGui as Gui
Gui.ActiveDocument.ActiveView.viewRear()

Gui.ActiveDocument.ActiveView.getViewDirection()