TechDraw HoleShaftFit

From FreeCAD Documentation
Revision as of 08:01, 29 May 2023 by David69 (talk | contribs)
Other languages:

TechDraw HoleShaftFit

Menu location
TechDraw → Add hole or shaft fit
Workbenches
TechDraw
Default shortcut
None
Introduced in version
0.21
See also
TechDraw Geometric dimensioning and tolerancing

Description

The TechDraw HoleShaftFit tool adds hole or shaft tolerances using ISO 286 to a linear dimension or a diameter dimension.

On the left the task panel, on the right some added tolerances

Usage

  1. Select a single linear dimension (length, horizontal or vertical) or a single diameter dimension.
  2. Press the Add hole or shaft fit button.
  3. A task panel opens.
  4. Specify shaft fit or hole fit as applicable.
  5. Select the desired ISO 286 fit option from the combo box. The corresponding field and the fit type (loose fit, snug fit or press fit) are updated.
  6. Press the OK button.
  7. The selected option and the calculated tolerance values are added to the dimension.