Std Utilitaire de projet

From FreeCAD Documentation
Revision as of 11:10, 9 May 2020 by David69 (talk | contribs) (Created page with "{{Caption|La boîte de dialogue de l'Utilitaire de projet}}")

Std Utilitaire de projet

Emplacement du menu
Outils → Utilitaire de projet
Ateliers
Tous
Raccourci par défaut
Aucun
Introduit dans la version
-
Voir aussi
Aucun

Description

La commande Std Utilitaire de projet vous permet d'extraire des fichiers à partir d'un fichier de projet FreeCAD (*.FCStd) qui est en fait un ZIP et, après les modifications manuelles, crée un nouveau fichier de projet à partir d'eux.

La boîte de dialogue de l'Utilitaire de projet

Usage

Extract project

  1. Select the Tools → Project utility... option from the menu.
  2. The Project utility dialog box opens.
  3. Press the ... button to the right of Extract project → Source.
  4. Select the *.FCStd file you want to edit.
  5. Press the ... button to the right of Extract project → Destination.
  6. Select a folder where the project file should be extracted. It is advisable to select an empty folder.
  7. Press the Extract button.
  8. Press the Close button to close the dialog box.

Manual edits

It is important to realize that the files inside a FreeCAD project file are interlinked. Only editing a single file will typically lead to errors. To make consistent edits across multiple files use a good code editor, such as Notepad++ (for the Windows OS).

Create project

  1. Select the Tools → Project utility... option from the menu.
  2. The Project utility dialog box opens.
  3. Press the ... button to the right of Create project → Source.
  4. Select the Document.xml file. The command will be automatically find all linked files.
  5. Press the ... button to the right of Create project → Destination.
  6. Select a folder where the new project file should be created.
  7. Press the Create button.
  8. A new project file with a fixed name, project.fcstd, is created in the selected folder. There is no warning if a file with that name already exists.
  9. Optionally check the Load project file after creation checkbox.
  10. Press the Close button to close the dialog box.

Notes