Команда "Ортогональная проекция"

From FreeCAD Documentation
Revision as of 09:11, 17 May 2020 by Baritone (talk | contribs) (Created page with "==Примечания==")

Std OrthographicCamera

Системное название
Std OrthographicCamera
Расположение в меню
Вид → Параллельная проекция
Верстаки
All
Быстрые клавиши
V O
Представлено в версии
-
См. также
Перспективная проекция

Описание

Переводит камеру в режим просмотра орфографии.
Орфографический (согласно Википедии):
... средство представления трехмерного объекта в двух измерениях ...

The Std OrthographicCamera command switches the camera in the active 3D view to orthographic view mode. In this mode, objects that are further from the camera do not appear smaller than those that are closer.

Two cubes with the same dimensions in orthographic view

Использование

  1. Есть несколько способов вызвать команду:
    • Выберите в меню опцию Вид → Ортогональная проекция.
    • Используйте клавиатурное сокращение: V, затем O.

Примечания

  • It is also possible to switch to orthographic view mode via the Mini-cube menu of the Navigation Cube.

Preferences

  • The camera type can be changed in the preferences: Edit → Preferences... → Display → 3D View → Camera type. The selected type will be used for all 3D views of all opened documents and also for new documents. See Preferences Editor.

Scripting

See also: FreeCAD Scripting Basics.

To change the view to orthographic use the setCameraType method of the ActiveView object. This method is not available if FreeCAD is in console mode.

import FreeCADGui

FreeCADGui.ActiveDocument.ActiveView.setCameraType('Orthographic')
FreeCADGui.ActiveDocument.ActiveView.getCameraType()