Std Délier

From FreeCAD Documentation
Revision as of 12:19, 23 September 2020 by David69 (talk | contribs) (Created page with "== Utilisation ==")

Std Délier

Emplacement du menu
Aucun
Ateliers
Tous
Raccourci par défaut
Aucun
Introduit dans la version
0.19
Voir aussi
Std Créer un lien, Std Créer un lien relatif, Std Remplacer par un lien

Description

Std Délier est essentiellement l'opération inverse à Std Remplacer par un lien.

Cette opération est utilisée pour supprimer un lien d'un conteneur comme Std Part et placez à la place l'objet réel à l'intérieur.

Utilisation

  1. Make sure you have a Link that is inside a container, for example, a Link to a Part Sphere inside a Std Part.
  2. Select the internal Link in the tree view.
  3. Press Std LinkUnlink.

The original Sphere must now be inside the Std Part, and the Link must be outside. Now this Link can be deleted if it's no longer needed, and it won't break the container.

A Link inside another object is unlinked, and the real object is placed inside instead.

A Link inside a group is unlinked, and the real object is placed inside instead.